SQL syntax

The syntax of the SQL programming language is defined and maintained by ISO/IEC SC 32 as part of ''ISO/IEC 9075''. This standard is not freely available. Despite the existence of the standard, SQL code is not completely portable among different database systems without adjustments.

Language elements

, width=500, caption=A chart showing several of the SQL language elements that compose a single statement. This adds one to the population of the USA in the country table.

The SQL language is subdivided into several language elements, including:

* ''Keywords'' are words that are defined in the SQL language. They are either reserved (e.g. , and ), or non-reserved (e.g. , and ). List of SQL reserved words.
* ''Identifiers'' are names on database objects, like tables, columns and schemas. An identifier may not be equal to a reserved keyword, unless it is a delimited identifier. Delimited identifiers means identifiers enclosed in double quotation marks. They can contain characters normally not supported in SQL identifiers, and they can be identical to a reserved word, e.g. a column named is specified as .
* ''Clauses'', which are constituent components of statements and queries. (In some cases, these are optional.)ANSI/ISO/IEC International Standard (IS). Database Language SQL—Part 2: Foundation (SQL/Foundation). 1999.
* ''Expressions'', which can produce either scalar values, or tables consisting of columns and rows of data
* ''Predicates'', which specify conditions that can be evaluated to SQL three-valued logic (3VL) (true/false/unknown) or Boolean truth values and are used to limit the effects of statements and queries, or to change program flow.
* ''Queries'', which retrieve the data based on specific criteria. This is an important element of ''SQL''.
* ''Statements'', which may have a persistent effect on schemata and data, or may control transactions, program flow, connections, sessions, or diagnostics.
** SQL statements also include the semicolon (";") statement terminator. Though not required on every platform, it is defined as a standard part of the SQL grammar.
* '' Insignificant whitespace'' is generally ignored in SQL statements and queries, making it easier to format SQL code for readability.

Operators

Other operators have at times been suggested or implemented, such as the skyline operator (for finding only those rows that are not 'worse' than any others).

SQL has the expression, which was introduced in SQL-92. In its most general form, which is called a "searched case" in the SQL standard:

CASE WHEN n > 0
THEN 'positive'
WHEN n < 0
THEN 'negative'
ELSE 'zero'
END

SQL tests conditions in the order they appear in the source. If the source does not specify an expression, SQL defaults to . An abbreviated syntax called "simple case" can also be used:

CASE n WHEN 1
THEN 'One'
WHEN 2
THEN 'Two'
ELSE 'I cannot count that high'
END

This syntax uses implicit equality comparisons, with the usual caveats for comparing with NULL.

There are two short forms for special expressions: and .

The expression returns the value of the first non-NULL operand, found by working from left to right, or NULL if all the operands equal NULL.

COALESCE(x1,x2)

is equivalent to:

CASE WHEN x1 IS NOT NULL THEN x1
ELSE x2
END

The expression has two operands and returns NULL if the operands have the same value, otherwise it has the value of the first operand.

NULLIF(x1, x2)

is equivalent to

CASE WHEN x1 = x2 THEN NULL ELSE x1 END

Comments

Standard SQL allows two formats for comments: , which is ended by the first newline, and , which can span multiple lines.

Queries

The most common operation in SQL, the query, makes use of the declarative SELECT statement. retrieves data from one or more tables, or expressions. Standard statements have no persistent effects on the database. Some non-standard implementations of can have persistent effects, such as the syntax provided in some databases.

Queries allow the user to describe desired data, leaving the database management system (DBMS) to carry out planning, optimizing, and performing the physical operations necessary to produce that result as it chooses.

A query includes a list of columns to include in the final result, normally immediately following the keyword. An asterisk ("*") can be used to specify that the query should return all columns of the queried tables. is the most complex statement in SQL, with optional keywords and clauses that include:

* The FROM clause, which indicates the table(s) to retrieve data from. The clause can include optional JOIN subclauses to specify the rules for joining tables.
* The WHERE clause includes a comparison predicate, which restricts the rows returned by the query. The clause eliminates all rows from the result set where the comparison predicate does not evaluate to True.
* The GROUP BY clause projects rows having common values into a smaller set of rows. is often used in conjunction with SQL aggregation functions or to eliminate duplicate rows from a result set. The clause is applied before the clause.
* The HAVING clause includes a predicate used to filter rows resulting from the clause. Because it acts on the results of the clause, aggregation functions can be used in the clause predicate.
* The ORDER BY clause identifies which column to use to sort the resulting data, and in which direction to sort them (ascending or descending). Without an clause, the order of rows returned by an SQL query is undefined.
* The DISTINCT keyword eliminates duplicate data.
* The clause specifies the number of rows to skip before starting to return data.
*The clause specifies the number of rows to return. Some SQL databases instead have non-standard alternatives, e.g. , or .
The clauses of a query have a particular order of execution, which is denoted by the number on the right hand side. It is as follows:

The following example of a query returns a list of expensive books. The query retrieves all rows from the ''Book'' table in which the ''price'' column contains a value greater than 100.00. The result is sorted in ascending order by ''title''. The asterisk (*) in the ''select list'' indicates that all columns of the ''Book'' table should be included in the result set.

SELECT *
FROM Book
WHERE price > 100.00
ORDER BY title;

The example below demonstrates a query of multiple tables, grouping, and aggregation, by returning a list of books and the number of authors associated with each book.

SELECT Book.title AS Title,
count(*) AS Authors
FROM Book
JOIN Book_author
ON Book.isbn = Book_author.isbn
GROUP BY Book.title;

Example output might resemble the following:

Title Authors
---------------------- -------
SQL Examples and Guide 4
The Joy of SQL 1
An Introduction to SQL 2
Pitfalls of SQL 1

Under the precondition that ''isbn'' is the only common column name of the two tables and that a column named ''title'' only exists in the ''Book'' table, one could re-write the query above in the following form:

SELECT title,
count(*) AS Authors
FROM Book
NATURAL JOIN Book_author
GROUP BY title;

However, many vendors either do not support this approach, or require certain column-naming conventions for natural joins to work effectively.

SQL includes operators and functions for calculating values on stored values. SQL allows the use of expressions in the ''select list'' to project data, as in the following example, which returns a list of books that cost more than 100.00 with an additional ''sales_tax'' column containing a sales tax figure calculated at 6% of the ''price''.

SELECT isbn,
title,
price,
price * 0.06 AS sales_tax
FROM Book
WHERE price > 100.00
ORDER BY title;

Subqueries

Queries can be nested so that the results of one query can be used in another query via a relational operator or aggregation function. A nested query is also known as a ''subquery''. While joins and other table operations provide computationally superior (i.e. faster) alternatives in many cases, the use of subqueries introduces a hierarchy in execution that can be useful or necessary. In the following example, the aggregation function receives as input the result of a subquery:

SELECT isbn,
title,
price
FROM Book
WHERE price < (SELECT AVG(price) FROM Book)
ORDER BY title;

A subquery can use values from the outer query, in which case it is known as a correlated subquery.

Since 1999 the SQL standard allows clauses for subqueries, i.e. named subqueries, usually called common table expressions (also called subquery factoring). CTEs can also be recursive by referring to themselves; the resulting mechanism allows tree or graph traversals (when represented as relations), and more generally fixpoint computations.

Derived table

A ''derived table'' is the use of referencing an SQL subquery in a FROM clause. Essentially, the derived table is a subquery that can be selected from or joined to. The derived table functionality allows the user to reference the subquery as a table. The inline view is also referred to as an ''inline view '' or a ''subselect''.

In the following example, the SQL statement involves a join from the initial "Book" table to the derived table "sales". This derived table captures associated book sales information using the ISBN to join to the "Book" table. As a result, the derived table provides the result set with additional columns (the number of items sold and the company that sold the books):

SELECT b.isbn, b.title, b.price, sales.items_sold, sales.company_nm
FROM Book b
JOIN (SELECT SUM(Items_Sold) Items_Sold, Company_Nm, ISBN
FROM Book_Sales
GROUP BY Company_Nm, ISBN) sales
ON sales.isbn = b.isbn

Null or three-valued logic (3VL)

The concept of Null allows SQL to deal with missing information in the relational model. The word is a reserved keyword in SQL, used to identify the Null special marker. Comparisons with Null, for instance equality (=) in WHERE clauses, results in an Unknown truth value. In SELECT statements SQL returns only results for which the WHERE clause returns a value of True; i.e., it excludes results with values of False and also excludes those whose value is Unknown.

Along with True and False, the Unknown resulting from direct comparisons with Null thus brings a fragment of three-valued logic to SQL. The truth tables SQL uses for AND, OR, and NOT correspond to a common fragment of the Kleene and Lukasiewicz three-valued logic (which differ in their definition of implication, however SQL defines no such operation).

There are however disputes about the semantic interpretation of Nulls in SQL because of its treatment outside direct comparisons. As seen in the table above, direct equality comparisons between two NULLs in SQL (e.g. ) return a truth value of Unknown. This is in line with the interpretation that Null does not have a value (and is not a member of any data domain) but is rather a placeholder or "mark" for missing information. However, the principle that two Nulls aren't equal to each other is effectively violated in the SQL specification for the and operators, which do identify nulls with each other.Ron van der Meyden, "Logical approaches to incomplete information: a survey" in Chomicki, Jan; Saake, Gunter (Eds.) ''Logics for Databases and Information Systems'', Kluwer Academic Publishers
, p. 344 Consequently, these set operations in SQL may produce results not representing sure information, unlike operations involving explicit comparisons with NULL (e.g. those in a clause discussed above). In Codd's 1979 proposal (which was basically adopted by SQL92) this semantic inconsistency is rationalized by arguing that removal of duplicates in set operations happens "at a lower level of detail than equality testing in the evaluation of retrieval operations". However, computer-science professor Ron van der Meyden concluded that "The inconsistencies in the SQL standard mean that it is not possible to ascribe any intuitive logical semantics to the treatment of nulls in SQL."

Additionally, because SQL operators return Unknown when comparing anything with Null directly, SQL provides two Null-specific comparison predicates: and test whether data is or is not Null. SQL does not explicitly support universal quantification, and must work it out as a negated existential quantification.Kawash, Jalal (2004) Complex quantification in Structured Query Language (SQL): a tutorial using relational calculus
''Journal of Computers in Mathematics and Science Teaching'' Volume 23, Issue 2, 2004 AACE Norfolk, Virginia. Thefreelibrary.com There is also the infixed comparison operator, which returns TRUE unless both operands are equal or both are NULL. Likewise, IS NOT DISTINCT FROM is defined as . SQL:1999 also introduced type variables, which according to the standard can also hold Unknown values if it is nullable. In practice, a number of systems (e.g. PostgreSQL) implement the BOOLEAN Unknown as a BOOLEAN NULL, which the standard says that the NULL BOOLEAN and UNKNOWN "may be used interchangeably to mean exactly the same thing".ISO/IEC 9075-2:2011 §4.5

Data manipulation

The Data Manipulation Language (DML) is the subset of SQL used to add, update and delete data:
* INSERT adds rows (formally tuples) to an existing table, e.g.:

INSERT INTO example
(column1, column2, column3)
VALUES
('test', 'N', NULL);

* UPDATE modifies a set of existing table rows, e.g.:

UPDATE example
SET column1 = 'updated value'
WHERE column2 = 'N';

* DELETE removes existing rows from a table, e.g.:

DELETE FROM example
WHERE column2 = 'N';

* MERGE is used to combine the data of multiple tables. It combines the and elements. It is defined in the SQL:2003 standard; prior to that, some databases provided similar functionality via different syntax, sometimes called " upsert".

MERGE INTO table_name USING table_reference ON (condition)
WHEN MATCHED THEN
UPDATE SET column1 = value1 column2 = value2 ... WHEN NOT MATCHED THEN
INSERT (column1 column2 ... VALUES (value1 value2 ...

Transaction controls

Transactions, if available, wrap DML operations:

* (or , or , depending on SQL dialect) marks the start of a database transaction, which either completes entirely or not at all.
* (or ) saves the state of the database at the current point in transaction

CREATE TABLE tbl_1(id int);
INSERT INTO tbl_1(id) VALUES(1);
INSERT INTO tbl_1(id) VALUES(2);
COMMIT;
UPDATE tbl_1 SET id=200 WHERE id=1;
SAVEPOINT id_1upd;
UPDATE tbl_1 SET id=1000 WHERE id=2;
ROLLBACK to id_1upd;
SELECT id from tbl_1;

* COMMIT makes all data changes in a transaction permanent.
* ROLLBACK discards all data changes since the last or , leaving the data as it was prior to those changes. Once the statement completes, the transaction's changes cannot be rolled back.

and terminate the current transaction and release data locks. In the absence of a or similar statement, the semantics of SQL are implementation-dependent.
The following example shows a classic transfer of funds transaction, where money is removed from one account and added to another. If either the removal or the addition fails, the entire transaction is rolled back.

START TRANSACTION;
UPDATE Account SET amount=amount-200 WHERE account_number=1234;
UPDATE Account SET amount=amount+200 WHERE account_number=2345;

IF ERRORS=0 COMMIT;
IF ERRORS<>0 ROLLBACK;

Data definition

The Data Definition Language (DDL) manages table and index structure. The most basic items of DDL are the , , , and statements:

* CREATE creates an object (a table, for example) in the database, e.g.:

CREATE TABLE example(
column1 INTEGER,
column2 VARCHAR(50),
column3 DATE NOT NULL,
PRIMARY KEY (column1, column2)
);

* ALTER modifies the structure of an existing object in various ways, for example, adding a column to an existing table or a constraint, e.g.:

ALTER TABLE example ADD column4 INTEGER DEFAULT 25 NOT NULL;

* TRUNCATE deletes all data from a table in a very fast way, deleting the data inside the table and not the table itself. It usually implies a subsequent COMMIT operation, i.e., it cannot be rolled back (data is not written to the logs for rollback later, unlike DELETE).

TRUNCATE TABLE example;

* DROP deletes an object in the database, usually irretrievably, i.e., it cannot be rolled back, e.g.:

DROP TABLE example;

Data types

Each column in an SQL table declares the type(s) that column may contain. ANSI SQL includes the following data types.

; Character strings and national character strings
* CHARACTER(n) (or CHAR(n)): fixed-width n-character string, padded with spaces as needed
* CHARACTER VARYING(n) (or VARCHAR(n)): variable-width string with a maximum size of n characters
* CHARACTER LARGE OBJECT(n M , G , T (or CLOB(n M , G , T ): character large object with a maximum size of n M , G , T /var> characters
* NATIONAL CHARACTER(n) (or NCHAR(n)): fixed width string supporting an international character set
* NATIONAL CHARACTER VARYING(n) (or NVARCHAR(n)): variable-width NCHAR string
* NATIONAL CHARACTER LARGE OBJECT(n M , G , T (or NCLOB(n M , G , T ): national character large object with a maximum size of n M , G , T /var> characters

For the and data types, the multipliers (1 024), (1 048 576), (1 073 741 824) and (1 099 511 627 776) can be optionally used when specifying the length.

; Binary
* BINARY(n): Fixed length binary string, maximum length n.
* BINARY VARYING(n) (or VARBINARY(n)): Variable length binary string, maximum length n.
* BINARY LARGE OBJECT(n M , G , T (or BLOB(n M , G , T ): binary large object with a maximum length n M , G , T /var>.

For the data type, the multipliers (1 024), (1 048 576), (1 073 741 824) and (1 099 511 627 776) can be optionally used when specifying the length.

; Boolean
*

The data type can store the values and .

; Numerical
* (or ), and
* , and
* NUMERIC(precision, scale) or DECIMAL(precision, scale)
* DECFLOAT(precision)

For example, the number 123.45 has a precision of 5 and a scale of 2. The precision is a positive integer that determines the number of significant digits in a particular radix (binary or decimal). The scale is a non-negative integer. A scale of 0 indicates that the number is an integer. For a decimal number with scale S, the exact numeric value is the integer value of the significant digits divided by 10^S.

SQL provides the functions and to round numerical values. (Popular vendor specific functions are (Informix, DB2, PostgreSQL, Oracle and MySQL) and (Informix, SQLite, Sybase, Oracle, PostgreSQL, Microsoft SQL Server and Mimer SQL.))

; Temporal (datetime)
* : for date values (e.g. ).
* : for time values (e.g. ).
* : the same as , but including details about the time zone in question.
* : This is a and a put together in one variable (e.g. ).
* : the same as , but including details about the time zone in question.

The SQL function can be used for extracting a single field (seconds, for instance) of a datetime or interval value. The current system date / time of the database server can be called by using functions like , , , or . (Popular vendor specific functions are , , , , , , , , , , and .)

; Interval (datetime)
* YEAR(precision): a number of years
* YEAR(precision) TO MONTH: a number of years and months
* MONTH(precision): a number of months
* DAY(precision): a number of days
* DAY(precision) TO HOUR: a number of days and hours
* DAY(precision) TO MINUTE: a number of days, hours and minutes
* DAY(precision) TO SECOND(scale): a number of days, hours, minutes and seconds
* HOUR(precision): a number of hours
* HOUR(precision) TO MINUTE: a number of hours and minutes
* HOUR(precision) TO SECOND(scale): a number of hours, minutes and seconds
* MINUTE(precision): a number of minutes
* MINUTE(precision) TO SECOND(scale): a number of minutes and seconds

Data control

The Data Control Language (DCL) authorizes users to access and manipulate data.
Its two main statements are:

* authorizes one or more users to perform an operation or a set of operations on an object.
* eliminates a grant, which may be the default grant.

Example:

GRANT SELECT, UPDATE
ON example
TO some_user, another_user;

REVOKE SELECT, UPDATE
ON example
FROM some_user, another_user;

Notes

{{ISO standards

SQL
Query languages
Programming language syntax
Declarative programming languages
Articles with example SQL code
Data modeling languages
Relational database management systems