The Stanley No. 1 Odd Jobs was a tool produced by the Stanley Works from 1888 to the 1930s. It combined features of sundry tools, in a single pocketable tool, including: *

Try square A try square or try-square is a woodworking tool used for marking and checking 90° angles on pieces of wood. Though woodworkers use many different Square (tool), types of square, the try square is considered one of the essential tools for woodwor ...

Mitre square Mitre Square is a small square in the City of London. It measures about by and is connected via three passages with Mitre Street to the south west, to Creechurch Place to the north west and, via St James's Passage (formerly Church Passage), to ...

T-square A T-square is a technical drawing instrument used by draftsmen primarily as a guide for drawing horizontal lines on a drafting table. The instrument is named after its resemblance to the letter T, with a long shaft called the "blade" and a sh ...

Marking gauge A marking gauge, also known as a scratch gauge, is used in woodworking and metalworking to mark out lines for cutting or other operations. The purpose of the gauge is to scribe a line parallel to a reference edge or surface. It is used in joiner ...

* Mortise gauge *

Depth gauge A depth gauge is an instrument for measuring depth below a reference surface. They include depth gauges for underwater diving and similar applications, and engineering instruments used to measure the depth of holes and indentations from a refer ...

* Mitre level *

Spirit level A spirit level, bubble level, or simply a level, is an instrument designed to indicate whether a surface is horizontal (level) or vertical (plumb). Different types of spirit levels may be used by carpenters, stonemasons, bricklayers, other ...

and plumb *

Beam compass A beam compass is a compass with a beam and sliding sockets or cursors for drawing and dividing circles larger than those made by a regular pair of compasses. The instrument can be as a whole, or made on the spot with individual sockets (called ...

* Inside square * Ruler (a separate part used to enable many of the above functions. Often a four fold rule, trimmed in brass, was used) The name ''Odd Jobs'' denotes that the tool does many kinds of sundry tool roles. Its closest cousin among common, modern tools, is the

combination square A combination square is a multi-purpose measuring and marking tool used in metalworking, woodworking, and stonemasonry. It is composed of a rule and one or more interchangeable heads that can be attached to the rule. Other names for the tool includ ...

, which shares with the Odd Job the functions of scribing, squaring, level/plumb, and the sliding and locking ruler (originally a 12 inch wooden ruler with a built-in trammel point was included with units bundled with a ruler, but this was often changed and many are found with a steel rule, or a brass-bound four-fold rule --- the Garret Wade reproduction uses a brass bound wooden ruler). However, the ''Odd Jobs'' still has some unique functions in its total package, including the compass, and compensated gauging.

Development

The Odd Jobs was developed by George F. Hall of

Long Branch, New Jersey Long Branch is a beachside City (New Jersey), city in Monmouth County, New Jersey, Monmouth County, in the U.S. state of New Jersey. As of the 2010 United States census, 2010 U.S. census, the city's population was 30,719,< ...

, and patented by him, filing on 7 May 1866, and receiving patent No. 356 533 on 25 January 1887. This patent date can be seen on early examples "PATJAN2587" across the width of the tool.

Production and availability

The OddJobs was produced by Stanley from 1887/8 to 1935. It came in a cardboard box with instruction leaflet. It could be combined with any suitable one inch wooden rule, notably the Stanley four fold boxwood and brass rule. The device was nickel coated, and earlier versions could take a pencil. It weighed . The price changed with time, but prices include 75 cents and $1.10. Stanley ceased production of the Odd Jobs in 1935, the Garrett Wade tool company revived the tool in 1996, and currently produces Odd Jobs according to the original Stanley design, in two different sizes. It was also available from Harbor Freight and Rockler. Woodpeckers has produced it as a one time tool twice now. File:Odd Jobs tool patent drawings cropped.png, Drawings of G.F. Hall's 1888 Odd Jobs patent File:Stanley's Odd Jobs advert.jpg, Page from Stanley's 1892 pocket catalogue demonstrating some of the tool's uses.

References

{{Authority control Hand tools Squares (tool)