Simcad Pro

simulation software Simulation software is based on the process of modeling a real phenomenon with a set of mathematical formulas. It is, essentially, a program that allows the user to observe an operation through simulation without actually performing that operation. ...

is a product of CreateASoft Inc. used for simulating process-based environments including

manufacturing Manufacturing is the creation or production of goods with the help of equipment, labor, machines, tools, and chemical or biological processing or formulation. It is the essence of secondary sector of the economy. The term may refer to a r ...

warehousing A warehouse is a building for storing goods. Warehouses are used by manufacturers, importers, exporters, wholesalers, transport businesses, customs, etc. They are usually large plain buildings in industrial parks on the outskirts of cities, tow ...

supply line Supply may refer to: *The amount of a resource that is available **Supply (economics), the amount of a product which is available to customers **Materiel, the goods and equipment for a military unit to fulfill its mission *Supply, as in confidenc ...

logistics Logistics is generally the detailed organization and implementation of a complex operation. In a general business sense, logistics manages the flow of goods between the point of origin and the point of consumption to meet the requirements of ...

, and

healthcare Health care or healthcare is the improvement of health via the prevention, diagnosis, treatment, amelioration or cure of disease, illness, injury, and other physical and mental impairments in people. Health care is delivered by health profe ...

. It is a tool used for planning, organizing, optimizing, and engineering real process-based systems. Simcad Pro allows the creation of a virtual

computer model Computer simulation is the process of mathematical modelling, performed on a computer, which is designed to predict the behaviour of, or the outcome of, a real-world or physical system. The reliability of some mathematical models can be deter ...

, which can be manipulated by the user and represents a real environment. Using the model, it is possible to test for efficiency as well as locate points of improvement among the process flow. Simcad Pro's dynamic computer model also allows for changes to occur while the model is running for a fully realistic simulation. It can also be integrated with live and historical data. Simulation software is part of a broader category of

Industry 4.0 The Fourth Industrial Revolution, 4IR, or Industry 4.0, conceptualizes rapid change to technology, industries, and societal patterns and processes in the 21st century due to increasing interconnectivity and smart automation. The term has bee ...

technologies, or technologies that move organizations to digitization of operations.

Model Building

User Interface

Simcad Pro has a user-friendly

graphical user interface The GUI ( "UI" by itself is still usually pronounced . or ), graphical user interface, is a form of user interface that allows users to interact with electronic devices through graphical icons and audio indicator such as primary notation, inste ...

for building virtual models of process-based environments, and the entire model can be built and edited without coding, including any advanced model characteristics. In addition to this, Simcad Pro allows for data import from almost any data source, including

Microsoft Access Microsoft Access is a database management system (DBMS) from Microsoft that combines the relational Access Database Engine (ACE) with a graphical user interface and software-development tools (not to be confused with the old Microsoft Access w ...

Excel ExCeL London (an abbreviation for Exhibition Centre London) is an exhibition centre, international convention centre and former hospital in the Custom House area of Newham, East London. It is situated on a site on the northern quay of the ...

, Visio, and SQL Server databases for easier model creation. Simcad Pro also supports real-time tracking using devices including

RFID tag Radio-frequency identification (RFID) uses electromagnetic fields to automatically identify and track tags attached to objects. An RFID system consists of a tiny radio transponder, a radio receiver and transmitter. When triggered by an electromagn ...

s and

barcode scanner A barcode reader is an optical scanner that can read printed barcodes, decode the data contained in the barcode to a computer. Like a flatbed scanner, it consists of a light source, a lens and a light sensor for translating optical impulses into e ...

s. Simulations can then be viewed in either 2D or 3D.

Simulation Engine

Simcad Pro uses a patented simulation engine that is 64-bit and fully multi-threaded, distinguishing it from the SIMAN simulation engine used in many competing software products. Models built with the Simcad engine feature patented "On-The-Fly" simulation, meaning that models can be manipulated, edited, and transformed as they are performing a simulation run.

Applied Industries

Any industry engaged in a process-flow environment can use Simcad Pro to model their operations. The main industries where Simcad Pro is used are manufacturing, warehousing, supply chain & logistics, and healthcare.

Manufacturing

Simcad Pro can be used to simulate

operations, with the most common goals being to: * Optimize production schedules * Optimize labor allocation * Perform capacity analysis and growth projection * Manage and reduce WIP * Identify bottlenecks and constraints * Optimize facility layout Simcad Pro supports high-mix manufacturing operations with the ability to model: * Detailed part routing * Multiple sub-assemblies/components and detailed BOM support * Tooling and manpower constraints * Work orders, detailed cell implementation and sequencing *

Kanban Kanban (Japanese: カンバン and Chinese: 看板, meaning signboard or billboard) is a scheduling system for lean manufacturing (also called just-in-time manufacturing, abbreviated JIT). Taiichi Ohno, an industrial engineer at Toyota, develope ...

pull and material handling

Warehousing

Simcad Pro can be used to simulate

warehouses A warehouse is a building for storing goods. Warehouses are used by manufacturers, importers, exporters, wholesalers, transport businesses, customs, etc. They are usually large plain buildings in industrial parks on the rural–urban fringe, outs ...

and distribution centers, with the most common goals being to: * Optimize pick paths * Perform congestion analysis * Optimize staging areas * Analyze receiving and put-away operations * Optimize slotting * Validate and implement

automation Automation describes a wide range of technologies that reduce human intervention in processes, namely by predetermining decision criteria, subprocess relationships, and related actions, as well as embodying those predeterminations in machines ...

* Analyze storage media

Supply Chain & Logistics

Simcad Pro can be used to simulate supply chains and logistics operations, with the most common goals being to: * Manage inventory and delivery to ensure product availability * Determine optimal locations for

distribution centers A distribution center for a set of products is a warehouse or other specialized building, often with refrigeration or air conditioning, which is stocked with products (goods) to be redistributed to retailers, to wholesalers, or directly to con ...

* Determine impact of changes to

supply and demand In microeconomics, supply and demand is an economic model of price determination in a Market (economics), market. It postulates that, Ceteris paribus, holding all else equal, in a perfect competition, competitive market, the unit price for a ...

* Reduce transportation costs * Optimize delivery routes * Plan capacity and scheduling changes * Reduce delivery

lead time A lead time is the latency between the initiation and completion of a process. For example, the lead time between the placement of an order and delivery of new cars by a given manufacturer might be between 2 weeks and 6 months, depending on vari ...

Healthcare

Simcad Pro can be used to simulate healthcare operations, such as emergency rooms and operating rooms, with the most common goals being to: * Optimize patient flow and reduce patient wait times * Optimize bed allocation * Analyze length-of-stay * Optimize staff utilization and scheduling * Optimize ED capacity planning * Optimize OR department scheduling & efficiency

Version History

References

{{Reflist