Radio Propagation Model

Radio propagation is the behavior of radio waves as they travel, or are propagated, from one point to another in vacuum, or into various parts of the atmosphere.
As a form of electromagnetic radiation, like light waves, radio waves are affected by the phenomena of reflection, refraction, diffraction, absorption, polarization, and scattering. Understanding the effects of varying conditions on radio propagation has many practical applications, from choosing frequencies for amateur radio communications, international shortwave broadcasters, to designing reliable mobile telephone systems, to radio navigation, to operation of radar systems.

Several different types of propagation are used in practical radio transmission systems. ''Line-of-sight propagation'' means radio waves which travel in a straight line from the transmitting antenna to the receiving antenna. Line of sight transmission is used for medium-distance radio transmission, such as cell phones, cordless phones, walkie-talkies, wireless networks, FM radio, television broadcasting, radar, and satellite communication (such as satellite television). Line-of-sight transmission on the surface of the Earth is limited to the distance to the visual horizon, which depends on the height of transmitting and receiving antennas. It is the only propagation method possible at microwave frequencies and above.

At lower frequencies in the MF, LF, and VLF bands, diffraction allows radio waves to bend over hills and other obstacles, and travel beyond the horizon, following the contour of the Earth. These are called ''surface waves'' or ''ground wave propagation''. AM broadcast and amateur radio stations use ground waves to cover their listening areas. As the frequency gets lower, the attenuation with distance decreases, so very low frequency (VLF) to extremely low frequency (ELF) ground waves can be used to communicate worldwide. VLF to ELF waves can penetrate significant distances through water and earth, and these frequencies are used for mine communication and military communication with submerged submarines.

At medium wave and shortwave frequencies ( MF and HF bands) radio waves can refract from the ionosphere. This means that medium and short radio waves transmitted at an angle into the sky can be refracted back to Earth at great distances beyond the horizon – even transcontinental distances. This is called ''skywave propagation''. It is used by amateur radio operators to communicate with operators in distant countries, and by shortwave broadcast stations to transmit internationally.

In addition, there are several less common radio propagation mechanisms, such as ''tropospheric scattering'' (troposcatter), ''tropospheric ducting'' (ducting) at VHF frequencies and '' near vertical incidence skywave'' (NVIS) which are used when HF communications are desired within a few hundred miles.

Frequency dependence

At different frequencies, radio waves travel through the atmosphere by different mechanisms or modes:

Free space propagation

In free space, all electromagnetic waves (radio, light, X-rays, etc.) obey the inverse-square law which states that the power density $\rho\,$ of an electromagnetic wave is proportional to the inverse of the square of the distance $r\,$ from a point source or:

:$\rho \propto \frac~.$

At typical communication distances from a transmitter, the transmitting antenna usually can be approximated by a point source. Doubling the distance of a receiver from a transmitter means that the power density of the radiated wave at that new location is reduced to one-quarter of its previous value.

The power density per surface unit is proportional to the product of the electric and magnetic field strengths. Thus, doubling the propagation path distance from the transmitter reduces each of these received field strengths over a free-space path by one-half.

Radio waves in vacuum travel at the speed of light. The Earth's atmosphere is thin enough that radio waves in the atmosphere travel very close to the speed of light, but variations in density and temperature can cause some slight refraction (bending) of waves over distances.

Direct modes (line-of-sight)

Line-of-sight refers to radio waves which travel directly in a line from the transmitting antenna to the receiving antenna. It does not necessarily require a cleared sight path; at lower frequencies radio waves can pass through buildings, foliage and other obstructions. This is the most common propagation mode at VHF and above, and the only possible mode at microwave frequencies and above. On the surface of the Earth, line of sight propagation is limited by the visual horizon to about . This is the method used by cell phones, cordless phones, walkie-talkies, wireless networks, point-to-point microwave radio relay links, FM and television broadcasting and radar. Satellite communication uses longer line-of-sight paths; for example home satellite dishes receive signals from communication satellites above the Earth, and ground stations can communicate with spacecraft billions of miles from Earth.

Ground plane reflection effects are an important factor in VHF line-of-sight propagation. The interference between the direct beam line-of-sight and the ground reflected beam often leads to an effective inverse-fourth-power law for ground-plane limited radiation.

Surface modes (groundwave)

Lower frequency (between 30 and 3,000 kHz) vertically polarized radio waves can travel as surface waves following the contour of the Earth; this is called ''ground wave'' propagation.

In this mode the radio wave propagates by interacting with the conductive surface of the Earth. The wave "clings" to the surface and thus follows the curvature of the Earth, so ground waves can travel over mountains and beyond the horizon. Ground waves propagate in vertical polarization so vertical antennas ( monopoles) are required. Since the ground is not a perfect electrical conductor, ground waves are attenuated as they follow the Earth's surface. Attenuation is proportional to frequency, so ground waves are the main mode of propagation at lower frequencies, in the MF, LF and VLF bands. Ground waves are used by radio broadcasting stations in the MF and LF bands, and for time signals and radio navigation systems.

At even lower frequencies, in the VLF to ELF bands, an Earth-ionosphere waveguide mechanism allows even longer range transmission. These frequencies are used for secure military communications. They can also penetrate to a significant depth into seawater, and so are used for one-way military communication to submerged submarines.

Early long-distance radio communication (wireless telegraphy) before the mid-1920s used low frequencies in the longwave bands and relied exclusively on ground-wave propagation. Frequencies above 3 MHz were regarded as useless and were given to hobbyists (radio amateurs). The discovery around 1920 of the ionospheric reflection or skywave mechanism made the medium wave and short wave frequencies useful for long-distance communication and they were allocated to commercial and military users.

Non-line-of-sight modes

Ionospheric modes (skywave)

Skywave propagation, also referred to as skip, is any of the modes that rely on reflection and refraction of radio waves from the ionosphere. The ionosphere is a region of the atmosphere from about that contains layers of charged particles (ions) which can refract a radio wave back toward the Earth. A radio wave directed at an angle into the sky can be reflected back to Earth beyond the horizon by these layers, allowing long-distance radio transmission. The F2 layer is the most important ionospheric layer for long-distance, multiple-hop HF propagation, though F1, E, and D-layers also play significant roles. The D-layer, when present during sunlight periods, causes significant amount of signal loss, as does the E-layer whose maximum usable frequency can rise to 4 MHz and above and thus block higher frequency signals from reaching the F2-layer. The layers, or more appropriately "regions", are directly affected by the sun on a daily diurnal cycle, a seasonal cycle and the 11-year sunspot cycle and determine the utility of these modes. During solar maxima, or sunspot highs and peaks, the whole HF range up to 30 MHz can be used usually around the clock and F2 propagation up to 50 MHz is observed frequently depending upon daily solar flux values. During solar minima, or minimum sunspot counts down to zero, propagation of frequencies above 15 MHz is generally unavailable.

Although the claim is commonly made that two-way HF propagation along a given path is reciprocal, that is, if the signal from location A reaches location B at a good strength, the signal from location B will be similar at station A because the same path is traversed in both directions. However, the ionosphere is far too complex and constantly changing to support the reciprocity theorem. The path is never exactly the same in both directions. In brief, conditions at the two end-points of a path generally cause dissimilar polarization shifts, hence dissimilar splits into ordinary rays and extraordinary rays (''Pedersen rays'') which have different propagation characteristics due to differences in ionization density, shifting zenith angles, effects of the Earth's magnetic dipole contours, antenna radiation patterns, ground conditions, and other variables.

Forecasting of skywave modes is of considerable interest to amateur radio operators and commercial marine and aircraft communications, and also to shortwave broadcasters. Real-time propagation can be assessed by listening for transmissions from specific beacon transmitters.

Meteor scattering

Meteor scattering relies on reflecting radio waves off the intensely ionized columns of air generated by meteors. While this mode is very short duration, often only from a fraction of second to couple of seconds per event, digital Meteor burst communications allows remote stations to communicate to a station that may be hundreds of miles up to over away, without the expense required for a satellite link. This mode is most generally useful on VHF frequencies between 30 and 250 MHz.

Auroral backscatter

Intense columns of Auroral ionization at 100 km (60 mile) altitudes within the auroral oval backscatter radio waves, including those on HF and VHF. Backscatter is angle-sensitive—incident ray vs. magnetic field line of the column must be very close to right-angle. Random motions of electrons spiraling around the field lines create a Doppler-spread that broadens the spectra of the emission to more or less noise-like – depending on how high radio frequency is used. The radio-auroras are observed mostly at high latitudes and rarely extend down to middle latitudes. The occurrence of radio-auroras depends on solar activity ( flares, coronal holes, CMEs) and annually the events are more numerous during solar cycle maxima. Radio aurora includes the so-called afternoon radio aurora which produces stronger but more distorted signals and after the Harang-minima, the late-night radio aurora (sub-storming phase) returns with variable signal strength and lesser doppler spread. The propagation range for this predominantly back-scatter mode extends up to about 2000 km (1250 miles) in east–west plane, but strongest signals are observed most frequently from the north at nearby sites on same latitudes.

Rarely, a strong radio-aurora is followed by Auroral-E, which resembles both propagation types in some ways.

Sporadic-E propagation

Sporadic E (Es) propagation occurs on HF and VHF bands.
It must not be confused with ordinary HF E-layer propagation. Sporadic-E at mid-latitudes occurs mostly during summer season, from May to August in the northern hemisphere and from November to February in the southern hemisphere. There is no single cause for this mysterious propagation mode. The reflection takes place in a thin sheet of ionization around 90 km (55 miles) height. The ionization patches drift westwards at speeds of few hundred km (miles) per hour. There is a weak periodicity noted during the season and typically Es is observed on 1 to 3 successive days and remains absent for a few days to reoccur again. Es do not occur during small hours; the events usually begin at dawn, and there is a peak in the afternoon and a second peak in the evening. Es propagation is usually gone by local midnight.

Observation of radio propagation beacons operating around 28.2 MHz, 50 MHz and 70 MHz, indicates that maximum observed frequency (MOF) for Es is found to be lurking around 30 MHz on most days during the summer season, but sometimes MOF may shoot up to 100 MHz or even more in ten minutes to decline slowly during the next few hours. The peak-phase includes oscillation of MOF with periodicity of approximately 5...10 minutes. The propagation range for Es single-hop is typically 1000 to 2000 km (600 to 1250 miles), but with multi-hop, double range is observed. The signals are very strong but also with slow deep fading.

Tropospheric modes

Radio waves in the VHF and UHF bands can travel somewhat beyond the visual horizon due to refraction in the troposphere, the bottom layer of the atmosphere below 20 km (12 miles).
This is due to changes in the refractive index of air with temperature and pressure. Tropospheric delay is a source of error in radio ranging techniques, such as the Global Positioning System (GPS).
In addition, unusual conditions can sometimes allow propagation at greater distances:

Tropospheric ducting

Sudden changes in the atmosphere's vertical moisture content and temperature profiles can on random occasions make UHF, VHF and microwave signals propagate hundreds of kilometers (miles) up to about —and for ducting mode even farther—beyond the normal radio-horizon. The inversion layer is mostly observed over high pressure regions, but there are several tropospheric weather conditions which create these randomly occurring propagation modes. Inversion layer's altitude for non-ducting is typically found between and for ducting about , and the duration of the events are typically from several hours up to several days. Higher frequencies experience the most dramatic increase of signal strengths, while on low-VHF and HF the effect is negligible. Propagation path attenuation may be below free-space loss. Some of the lesser inversion types related to warm ground and cooler air moisture content occur regularly at certain times of the year and time of day. A typical example could be the late summer, early morning tropospheric enhancements that bring in signals from distances up to few hundred kilometers (miles) for a couple of hours, until undone by the Sun's warming effect.

Tropospheric scattering (troposcatter)

At VHF and higher frequencies, small variations (turbulence) in the density of the atmosphere at a height of around can scatter some of the normally line-of-sight beam of radio frequency energy back toward the ground. In tropospheric scatter (troposcatter) communication systems a powerful beam of microwaves is aimed above the horizon, and a high gain antenna over the horizon aimed at the section of the troposphere though which the beam passes receives the tiny scattered signal. Troposcatter systems can achieve over-the-horizon communication between stations apart, and the military developed networks such as the White Alice Communications System covering all of Alaska before the 1960s, when communication satellites largely replaced them.

Rain scattering

Rain scattering is purely a microwave propagation mode and is best observed around 10 GHz, but extends down to a few gigahertz—the limit being the size of the scattering particle size vs. wavelength. This mode scatters signals mostly forwards and backwards when using horizontal polarization and side-scattering with vertical polarization. Forward-scattering typically yields propagation ranges of 800 km (500 miles). Scattering from snowflakes and ice pellets also occurs, but scattering from ice without watery surface is less effective. The most common application for this phenomenon is microwave rain radar, but rain scatter propagation can be a nuisance causing unwanted signals to intermittently propagate where they are not anticipated or desired. Similar reflections may also occur from insects though at lower altitudes and shorter range. Rain also causes attenuation of point-to-point and satellite microwave links. Attenuation values up to 30 dB have been observed on 30 GHz during heavy tropical rain.

Airplane scattering

Airplane scattering (or most often reflection) is observed on VHF through microwaves and, besides back-scattering, yields momentary propagation up to 500 km (300 miles) even in mountainous terrain. The most common back-scatter applications are air-traffic radar, bistatic forward-scatter guided-missile and airplane-detecting trip-wire radar, and the US space radar.

Lightning scattering

Lightning scattering has sometimes been observed on VHF and UHF over distances of about 500 km (300 miles). The hot lightning channel scatters radio-waves for a fraction of a second. The RF noise burst from the lightning makes the initial part of the open channel unusable and the ionization disappears quickly because of recombination at low altitude and high atmospheric pressure. Although the hot lightning channel is briefly observable with microwave radar, no practical use for this mode has been found in communications.

Other effects

Diffraction

''Knife-edge diffraction'' is the propagation mode where radio waves are bent around sharp edges. For example, this mode is used to send radio signals over a mountain range when a line-of-sight path is not available. However, the angle cannot be too sharp or the signal will not diffract. The diffraction mode requires increased signal strength, so higher power or better antennas will be needed than for an equivalent line-of-sight path.

Diffraction depends on the relationship between the wavelength and the size of the obstacle. In other words, the size of the obstacle in wavelengths. Lower frequencies diffract around large smooth obstacles such as hills more easily. For example, in many cases where VHF (or higher frequency) communication is not possible due to shadowing by a hill, it is still possible to communicate using the upper part of the HF band where the surface wave is of little use.

Diffraction phenomena by small obstacles are also important at high frequencies. Signals for urban cellular telephony tend to be dominated by ground-plane effects as they travel over the rooftops of the urban environment. They then diffract over roof edges into the street, where multipath propagation, absorption and diffraction phenomena dominate.

Absorption

Low-frequency radio waves travel easily through brick and stone and VLF even penetrates sea-water. As the frequency rises, absorption effects become more important. At microwave or higher frequencies, absorption by molecular resonances in the atmosphere (mostly from water, H₂O and oxygen, O₂) is a major factor in radio propagation. For example, in the 58–60 GHz band, there is a major absorption peak which makes this band useless for long-distance use. This phenomenon was first discovered during radar research in World War II. Above about 400 GHz, the Earth's atmosphere blocks most of the spectrum while still passing some - up to UV light, which is blocked by ozone - but visible light and some of the near-infrared is transmitted.
Heavy rain and falling snow also affect microwave absorption.

Measuring HF propagation

HF propagation conditions can be simulated using radio propagation models, such as the Voice of America Coverage Analysis Program, and realtime measurements can be done using chirp transmitters. For radio amateurs the WSPR mode provides maps with real time propagation conditions between a network of transmitters and receivers. Even without special beacons the realtime propagation conditions can be measured: A worldwide network of receivers decodes morse code signals on amateur radio frequencies in realtime and provides sophisticated search functions and propagation maps for every station received.

Practical effects

The average person can notice the effects of changes in radio propagation in several ways.

In AM broadcasting, the dramatic ionospheric changes that occur overnight in the mediumwave band drive a unique broadcast license scheme in the United States, with entirely different transmitter power output levels and directional antenna patterns to cope with skywave propagation at night. Very few stations are allowed to run without modifications during dark hours, typically only those on clear channels in North America. Many stations have no authorization to run at all outside of daylight hours.

For FM broadcasting (and the few remaining low-band TV stations), weather is the primary cause for changes in VHF propagation, along with some diurnal changes when the sky is mostly without cloud cover.
These changes are most obvious during temperature inversions, such as in the late-night and early-morning hours when it is clear, allowing the ground and the air near it to cool more rapidly. This not only causes dew, frost, or fog, but also causes a slight "drag" on the bottom of the radio waves, bending the signals down such that they can follow the Earth's curvature over the normal radio horizon. The result is typically several stations being heard from another media market – usually a neighboring one, but sometimes ones from a few hundred kilometers (miles) away. Ice storms are also the result of inversions, but these normally cause more scattered omnidirection propagation, resulting mainly in interference, often among weather radio stations. In late spring and early summer, a combination of other atmospheric factors can occasionally cause skips that duct high-power signals to places well over 1000 km (600 miles) away.

Non-broadcast signals are also affected. Mobile phone signals are in the UHF band, ranging from 700 to over 2600 MHz, a range which makes them even more prone to weather-induced propagation changes. In urban (and to some extent suburban) areas with a high population density, this is partly offset by the use of smaller cells, which use lower effective radiated power and beam tilt to reduce interference, and therefore increase frequency reuse and user capacity. However, since this would not be very cost-effective in more rural areas, these cells are larger and so more likely to cause interference over longer distances when propagation conditions allow.

While this is generally transparent to the user thanks to the way that cellular networks handle cell-to-cell handoffs, when cross-border signals are involved, unexpected charges for international roaming may occur despite not having left the country at all. This often occurs between southern San Diego and northern Tijuana at the western end of the U.S./Mexico border, and between eastern Detroit and western Windsor along the U.S./Canada border. Since signals can travel unobstructed over a body of water far larger than the Detroit River, and cool water temperatures also cause inversions in surface air, this "fringe roaming" sometimes occurs across the Great Lakes, and between islands in the Caribbean. Signals can skip from the Dominican Republic to a mountainside in Puerto Rico and vice versa, or between the U.S. and British Virgin Islands, among others. While unintended cross-border roaming is often automatically removed by mobile phone company billing systems, inter-island roaming is typically not.

Empirical models

A radio propagation model, also known as the radio wave propagation model or the radio frequency propagation model, is an empirical mathematical formulation for the characterization of radio wave propagation as a function of frequency, distance and other conditions. A single model is usually developed to predict the behavior of propagation for all similar links under similar constraints. Created with the goal of formalizing the way radio waves are propagated from one place to another, such models typically predict the path loss along a link or the effective coverage area of a transmitter.

As the path loss encountered along any radio link serves as the dominant factor for characterization of propagation for the link, radio propagation models typically focus on realization of the path loss with the auxiliary task of predicting the area of coverage for a transmitter or modeling the distribution of signals over different regions

Because each individual telecommunication link has to encounter different terrain, path, obstructions, atmospheric conditions and other phenomena, it is intractable to formulate the exact loss for all telecommunication systems in a single mathematical equation. As a result, different models exist for different types of radio links under different conditions. The models rely on computing the median path loss for a link under a certain probability that the considered conditions will occur.

Radio propagation models are empirical in nature, which means, they are developed based on large collections of data collected for the specific scenario. For any model, the collection of data has to be sufficiently large to provide enough likeliness (or enough scope) to all kind of situations that can happen in that specific scenario. Like all empirical models, radio propagation models do not point out the exact behavior of a link, rather, they predict the most likely behavior the link may exhibit under the specified conditions.

Different models have been developed to meet the needs of realizing the propagation behavior in different conditions. Types of models for radio propagation include:

;Models for free space attenuation
* Free-space path loss
* Dipole field strength in free space
* Friis transmission equation

;Models for outdoor attenuation
*Terrain models
** ITU terrain model
** Egli model
** Longley–Rice Irregular Terrain Model (ITM)
**Two-ray ground-reflection model
*City models
**Okumura model
**Hata model for urban areas
**Hata model for suburban areas
**Hata model for open areas
**COST Hata model

;Models for indoor attenuation
*ITU model for indoor attenuation
* Log-distance path loss model

See also

* Anomalous propagation
* Channel model
* Computation of radiowave attenuation in the atmosphere
* Critical frequency
* Diversity scheme
* Earth bulge
* Effective Earth radius
* Earth-ionosphere waveguide
* Electromagnetic radiation
* F2 propagation
* Fading
* Free space
* Fresnel zone
* Inversion (meteorology)
* Kennelly–Heaviside layer
* Link budget
* Mobility model
* Nakagami fading
* Near and far field
* Propagation Graph
* Radio atmospherics
* Radio frequency
* Radio horizon
* Radio resource management
* Ray tracing (physics)
* Rayleigh fading
* Schumann resonance
* Skip (radio)
* Skip zone
* Skywave
* TV and FM DX
* Traffic generation model
* Tropospheric propagation
* Upfade
* VOACAP - Free professional HF propagation prediction software
* Vertical and horizontal (radio propagation)

Footnotes

References

Further reading

*
*
*
*
*

External links

Solar widget
Propagation widget based on NOAA data. Also available as WordPress plugin.

ARRL Propagation Page
The American Radio Relay League page on radio propagation.

HF Radio and Ionospheric Prediction Service - Australia

NASA Space Weather Action Center


* ttps://www.electronics-notes.com/articles/antennas-propagation/ionospheric/hf-propagation-basics.php HF ionospheric propagationseveral pages

{{Authority control