Roebling Family

John Augustus Roebling (born Johann August Röbling; June 12, 1806 – July 22, 1869) was a German-born American civil engineer. He designed and built wire rope suspension bridges, in particular the Brooklyn Bridge, which has been designated as a National Historic Landmark and a National Historic Civil Engineering Landmark.

Education

John Röbling was born to Friederike Dorothea Röbling (née Muelleren) and Christoph Polykarpus Röbling. Recognizing his intelligence at a young age, Roebling's mother arranged for him to be tutored in mathematics and science at Erfurt by Ephraim Salomon Unger. He went to Erfurt when he was 15. In 1824 he passed his Surveyor's examination and returned home for a year.

In 1824 he enrolled for two semesters at the Bauakademie in Berlin, where he studied architecture and engineering under Martin Friedrich Rabe (1765–1856), bridge construction and foundation construction under Johann Friedrich Dietlein (1782–1837), hydraulics under Johann Albert Eytelwein (1764–1848), and languages. Roebling also attended lectures of the philosopher Georg Wilhelm Friedrich Hegel. Roebling developed an interest in natural philosophy. Many years later, he worked on a 1000-page treatise about his own concepts of the universe.

In 1825 Roebling got a government job in the Arnsberg province, and moved to Eslohe, where he worked for four years on designing and supervising construction of military roads. During this period he made sketches for suspension bridges over Ruhr- and Lenne-river, which were never built. In 1829 he returned to his home to work out his final thesis and prepare for his second engineer examination. For unknown reasons, he never took the examination.

Career

On May 22, 1831, Roebling left Prussia with a group of emigrants bound for the United States. They included his brother Carl and the older Johann Adolphus Etzler, who believed in a technological utopia. Engineers had difficulty advancing and achieving economic mobility in Prussian society, in part because of the Napoleonic Wars, which had lasted until 1815, and suppressed investment in infrastructure. During this period, Prussia also had considerable political unrest, as authoritarian governments took the places of democratic ones.

Etzler believed that they could create a technological utopia in the United States, but disputes arose among the men en route. The group split up after reaching Pennsylvania. John and Carl Roebling purchased 1,582 acres (640 hectares) of land on October 28, 1831, in Butler County, Pennsylvania with the intent to establish a German settlement, to be called Saxonburg. Most of the other settlers had remained with Etzler. In 20th-century recognition of his historic importance, the John Roebling House at Saxonburg was listed on the National Register of Historic Places in 1976.

When the Roeblings and others arrived, the United States was in the later stages of an economic boom, but this ended in the financial Panic of 1837, reducing everyone's opportunities. Farmers were deeply affected by it as they often depended on credit to produce the next season's crops. But by the 1840s, the economy was improving and many Americans believed in the nation's manifest destiny to extend its borders and achieve greatness on the North American continent. Transportation between eastern industrial hubs and frontier farming markets had become a matter of both national and popular interest.

Many railway and transportation projects were under way near the site which Roebling chose for his colony, but instead of continuing in the engineering profession, he took up farming. After five years he married Johanna Herting, a tailor's daughter. He found agrarian work unsatisfying, and Saxonburg attracted few settlers.

In 1837, after the birth of his first child and the death of his brother Carl, Roebling returned to engineering for work. He first worked on projects to improve river navigation and build canals. For three years, he conducted surveys for the state of Pennsylvania for railway lines across the Allegheny Mountains, from the capital, Harrisburg, to Pittsburgh in the far west, at the start of the Ohio River.

In 1840 Roebling wrote to suspension bridge designer Charles Ellet, Jr., offering to help with the design of a bridge near Philadelphia:

The study of suspension bridges formed for the last few years of my residence in Europe my favourite occupation ... Let but a single bridge of the kind be put up in Philadelphia, exhibiting all the beautiful forms of the system to full advantage, and it needs no prophecy to foretell the effect which the novel and useful features will produce upon the intelligent minds of the Americans.

At that time canal boats from Philadelphia were transported over the Allegheny Mountains on railroad cars in order to access waterways on the other side of the mountains, so that the boats could continue to Pittsburgh. The system of inclines and levels that moved the boats and conventional railroad cars was a state-owned enterprise, the Allegheny Portage Railroad. The railroad cars were pulled up and down the inclines by a long loop of thick hemp rope, up to 7 centimetres thick. The hemp ropes were expensive and had to be replaced frequently.

Roebling remembered an article he had read about wire rope. Soon after, he started developing a 7-strand wire rope at a ropewalk that he built on his farm. In 1841, Roebling began producing wire rope at Saxonburg to use in suspension bridges and such projects as the portage railroad.

In 1844 Roebling won a bid to replace the wooden canal aqueduct across the Allegheny River with the Allegheny Aqueduct. His design encompassed seven spans of 163 feet (50 m), each consisting of a wooden trunk to hold the water, supported by a continuous cable made of many parallel wires, wrapped tightly together, on each side of the trunk. He followed this innovation in 1845 by building a suspension bridge over the Monongahela River at Pittsburgh. The confluence of the Allegheny and Monongahela at Pittsburgh forms the Ohio River.

In 1848 Roebling undertook the construction of four suspension aqueducts on the Delaware and Hudson Canal. During this period, he moved to Trenton, New Jersey: "Trenton Makes, the World Takes".

Roebling's next project, starting in 1851, was a railroad bridge connecting the New York Central and Great Western Railway of Canada over the Niagara River. Construction took four years. The bridge, with a clear span of 825 feet (251 m), was supported by four, ten-inch (25 cm) wire cables, and had two levels, one for vehicles and one for rail traffic.

While the Niagara bridge was being built, Roebling designed a railway suspension bridge across the Kentucky River, which required a clear span of 1,224 feet (373 m). The anchorage and stone towers were completed, and the cable wire delivered along with the material for the superstructure, when the railway company became insolvent. The bridge construction was halted and he was never able to complete it.

What is now known as the High Bridge was later completed as the first cantilever bridge in the US, with a truss for carrying the railway track. A second version was built on the same foundations in 1911. The highest railroad bridge over a navigable river in the United States, the bridge is still in use.

In 1859 Roebling completed another suspension bridge at Pittsburgh over the Allegheny River. Its total length was 1,030 feet (314m), consisting of two main spans of 344 feet (105m) each, and two side spans of 171 feet (52m) each. His son Washington Roebling worked with him on that project, having completed his engineering degree.

The American Civil War brought a temporary halt to Roebling's work, as resources were diverted to the war effort. In 1863 building resumed on a bridge over the Ohio River at Cincinnati, which Roebling had started in 1856 and halted due to lack of financing. He finished this bridge in 1867. The Cincinnati-Covington Bridge, later named the John A. Roebling Suspension Bridge in his honour, was the world's longest suspension bridge at the time it was finished.

Death

In 1867 Roebling started design work on what is now called the Brooklyn Bridge, spanning the East River in New York. On June 28, 1869 at Fulton Ferry, while he was standing at the edge of a dock, working on fixing the location where the bridge would be built, his foot was crushed by an arriving ferry. His injured toes were amputated. He refused further medical treatment and wanted to cure his foot by "water therapy" (continuous pouring of water over the wound). His condition deteriorated. He died on July 22, 1869 of tetanus at the home of his son on Hicks Street, in Brooklyn Heights. It was 24 days after the accident. His son Washington Roebling was later named chief engineer of the project, but due to his further incapacity to work after suffering from 'the bends' whilst in a caisson on the river bed, his wife Emily took over the project and it was completed in 1883. John Roebling is buried in the Riverview Cemetery in Trenton, New Jersey

HOME


Content is Copyleft
Website design, code, and AI is Copyrighted (c) 2014-2017 by Stephen Payne


Consider donating to Wikimedia



As an Amazon Associate I earn from qualifying purchases