Redwing 30
   HOME

TheInfoList



OR:

The C&C Redwing 30, also called the C&C 30 Redwing, Redwing 30 or just the Redwing, is a Canadian
sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...
, that was designed by
Cuthbertson & Cassian C&C Yachts was a builder of high-performance fiberglass monohull sailboats with production facilities in Canada, Germany, and the United States. C&C designed and constructed a full range of production line cruiser-racer boats, as well as custom ...
and first built in 1967.


Production

Cuthbertson & Cassian designed the boat for
Hinterhoeller Yachts Hinterhoeller Yachts was a Canadian boat builder based in St. Catharines, Ontario. The company specialized in the design and manufacture of fiberglass sailboats. The company was originally founded by George Hinterhoeller as Hinterhoeller Limit ...
, who put it into production in 1967 in
Canada Canada is a country in North America. Its ten provinces and three territories extend from the Atlantic Ocean to the Pacific Ocean and northward into the Arctic Ocean, covering over , making it the world's second-largest country by tot ...
as the Redwing 30. When
C&C Yachts C&C Yachts was a builder of high-performance fiberglass monohull sailboats with production facilities in Canada, Germany, and the United States. C&C designed and constructed a full range of production line cruiser-racer boats, as well as custom ...
bought out Hinterhoeller in 1972 the boat was still in production and was then sold as the C&C Redwing 30. Production ended later in 1972, in favour of more modern designs, with only about 145-150 examples completed


Design

The Redwing 30 is a small recreational
keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open wat ...
, built predominantly of
fibreglass Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass clo ...
, with wood trim. It has a
masthead sloop A masthead rig on a sailing vessel consists of a forestay and backstay both attached at the top of the mast. The Bermuda rig can be split into two groups: the masthead rig and the fractional rig. The masthead rig has larger and more headsails, a ...
rig, a
raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...
, a raised
transom Transom may refer to: * Transom (architecture), a bar of wood or stone across the top of a door or window, or the window above such a bar * Transom (nautical), that part of the stern of a vessel where the two sides of its hull meet * Operation Tran ...
, an internally-mounted, scimitar-shaped, spade-type
rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally aircraft, air or watercraft, water). On an aircraft the rudder is used primarily to ...
controlled by a
tiller A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post or stock to provide leverage in the form of torque for the helmsman to turn the rudder. ...
and a fixed swept fin
keel The keel is the bottom-most longitudinal structural element on a vessel. On some sailboats, it may have a hydrodynamic and counterbalancing purpose, as well. As the laying down of the keel is the initial step in the construction of a ship, in Br ...
. It displaces and carries of ballast. The scimitar shaped rudder design was dictated by the proximity of the propeller shaft and the need to reduce rudder pressure. The boat has a draft of with the standard keel fitted. The boat is fitted with a
Universal Atomic 4 The Universal Atomic 4 is a four-cylinder, gasoline engine produced by the Universal Motor Company between 1949 and 1984 for use as auxiliary power on sailboats. Both and versions of the engine were produced. Over 40,000 of the engines were pro ...
gasoline engine A petrol engine (gasoline engine in American English) is an internal combustion engine designed to run on petrol (gasoline). Petrol engines can often be adapted to also run on fuels such as liquefied petroleum gas and ethanol blends (such as ''E ...
. The design has a
hull speed Hull speed or displacement speed is the speed at which the wavelength of a vessel's bow wave is equal to the waterline length of the vessel. As boat speed increases from rest, the wavelength of the bow wave increases, and usually its crest-to-tro ...
of .


Operational history

In a 2000 used boat review, writer Karen Larson noted the boat's aesthetics and also wrote: "The Redwing isn't like the rest of the Canadian-built C&Cs that came a bit later and are so common on the Great Lakes ... Only 145 to 150 Redwings were built by Hinterhoeller between 1967 and 1972, before they cast those plans aside in favor of the C&C 30, of which more than 800 were produced between 1973 and 1985 ... Since the Redwing came relatively early in the history of production fiberglass boats, Cuthbertson and Cassian were clearly influenced by the designs of Carl Alberg. The Redwing has the recognizable wooden cockpit coamings and the pedestal-mounted winches. She has that beautiful upswept stern and a narrow beam. At 21 feet 9 inches her waterline is much shorter than her 30 feet on deck would lead you to believe. And space below is tight, as can be expected of all boats with the Alberg look." Reviewer Ted Brewer wrote in 2000: "the Redwing was still very much state-of-the-art when she was designed ... The yacht was able to compete with CCA cruiser/racers of her size and larger and still win more than her share of silver ... she simply gobbled up competitors that rated a foot or so higher under the CCA rule. That is due, in part, to the unusually high ballast/displacement ratio, which keeps her standing up to the breeze despite her modest beam and her generous (by CCA standards) sail area ... In light weather she would still shine, as her short waterline, modest beam, and relatively slack-bilge hull help to reduce wetted surface, the major cause of resistance when the winds soften. Redwing's spade rudder and shark-style fin were also state-of-the-art for the late '60s. Her all-lead outside ballast gave her an edge over many competing yachts ... I don't consider the Redwing 30 to be a true bluewater yacht, due to her lack of a bridge deck and her deck-stepped mast, although I'm sure that many of them have made extensive offshore voyages ... By any standards, she is a classic."


See also

*
List of sailing boat types The following is a partial list of sailboat types and sailing classes, including keelboats, dinghies and multihull ( catamarans and trimarans). Olympic classes World Sailing Classes Historically known as the IYRU (International Yacht Racing ...
Similar sailboats *
Alberg 30 The Alberg 30 is a Canadian sailboat, that was designed by Carl Alberg and first built in 1962. The Alberg 30 incorporates design elements from the similar Alberg Odyssey 30 of two years earlier. Production The boat was built by Whitby Boat ...
*
Alberg Odyssey 30 The Odyssey 30 is an American sailboat, that was designed by Carl Alberg and first built in 1960 in the San Francisco bay area. A total of 15 examples were completed. Many of the design elements of the Odyssey 30 were used in the Alberg 30 of ...
*
Annie 30 The Annie 30, often just called Annie, is an American sailboat that was designed by Chuck Paine as an offshore cruiser and first built in 1980.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 206-207. ...
*
Aloha 30 The Aloha 30 is a Canadian sailboat, that was designed by Ron Holland and first built in 1986. Production The boat was built by Ouyang Boat Works under the Aloha Yachts brand in Canada between 1986 and 1989, but it is now out of production. ...
*
Bahama 30 The Bahama 30 is an American sailboat that was designed by Bob Finch as a cruiser and first built in 1973.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 210-211. Houghton Mifflin Company, 1994. T ...
*
Bristol 29.9 The Bristol 29.9 is an American sailboat that was designed by Halsey Chase Herreshoff as a Midget Offshore Racing Class and International Offshore Rule racer and first built in 1977.Sherwood, Richard M.: ''A Field Guide to Sailboats of North ...
*
C&C 1/2 Ton The C&C 1/2 Ton is a Canadian sailboat, that was designed by C&C Design as an International Offshore Rule Half Ton class racer. The C&C 1/2 Ton design was the basis for the C&C 29 of 1977. Production The boat was built by C&C Yachts in Canad ...
*
C&C 30 The C&C 30 is a series of Canadian and American sailboats, that was first built in 1973. The C&C 30 molds are thought to have been used to create the Lancer 29 Mark III and the Lancer 30 Mark II in 1977. Production The initial models were ...
*
C&C Mega 30 One Design The C&C Mega 30 One Design is a Canadian sailboat, that was designed by American Peter Barrett as a one design racer and first built in 1977. Production The boat was built by C&C Yachts in Canada and also in the United States and Kiel, Germa ...
*
Catalina 30 The Catalina 30 is a series of American sailboats, that were designed by Frank Butler and later by Gerry Douglas. The Catalina 30 design was replaced in the company's line by the Catalina 309 in 2010. Production The boat was built by Catal ...
*
Catalina 309 The Catalina 309 is an American sailboat, that was designed by Gerry Douglas and first built in 2005. Production The boat was built by Catalina Yachts in the United States starting in 2005, but is now out of production. Design The Catalina 3 ...
*
CS 30 The CS 30 is a Canadian sailboat, that was designed by Tony Castro and first built in 1984. The design is out of production. Production The boat was built by Canadian Sailcraft in Canada. It became their most successful model, with 90 built ...
*
Grampian 30 The Grampian 30 is a Canadian sailboat, that was designed by Alex McGruer and first built in 1969. Production The design was built by Grampian Marine in Canada between 1969 and 1977, with a total of 400 examples completed. The design is now o ...
*
Hunter 30 The Hunter 30 is an American sailboat that was designed by John Cherubini as a cruising boat and first built in 1973. The boat was also supplied as an unfinished kit for amateur completion as the Quest 30. The Hunter 30 was the first design ...
*
Hunter 30T The Hunter 30T is an American sailboat that was first built in 1991. The Hunter 30T is a development of the 1988 Hunter 30-2 design. The design was originally marketed by the manufacturer as the Hunter 30, but is now usually referred to as th ...
*
Hunter 30-2 The Hunter 30-2 is an American sailboat, that was built by Hunter Marine in the United States between 1988 and 1992. The boat was sold under the name ''Hunter 30'', but because the company has sold four designs under that name, this design ha ...
*
Hunter 306 The Hunter 306 is an American sailboat design, that was introduced in 2001. The design forms a scaled series with the Hunter 326 and the 356. Production The design was built by Hunter Marine in the United States, starting in 2001, but it is ...
* J/30 *
Kirby 30 The Kirby 30 is a Canadian racing sailboat, that was designed by Bruce Kirby and first built in 1981. The Kirby 30 design was a follow-on to the Kirby 25 and it was later developed into the Mirage 30 SX in 1985. Production The boat was built ...
* Leigh 30 *
Mirage 30 The Mirage 30 is a Canadian sailboat, that was designed by Americans, American Robert Perry (yacht designer), Robert Perry and first built in 1983. The design is out of production. The boat was built by Mirage Yachts in Canada. The Mirage 30 ...
*
Mirage 30 SX The Mirage 30 SX is a Canadian sailboat, that was designed by Bruce Kirby as a racer and first built in 1985. The Mirage 30 SX design is not related to the Mirage 30, but is instead a lightweight development of the Kirby 30, with a deeper el ...
*
Nonsuch 30 The Nonsuch 30 is a Canadian sailboat that was designed by Mark Ellis and first built in 1978. It was the first the series of Nonsuch sailboats and was scaled upwards and down, to form a complete line of boats, from the Nonsuch 22 to the N ...
*
Pearson 303 The Pearson 303 is an American sailboat that was designed by William Shaw as a cruiser and first built in 1983.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 226-227. Houghton Mifflin Company, 1994 ...
*
S2 9.2 The S2 9.2 is an American sailboat that was designed by Arthur Edmunds as a Cruising (maritime), cruiser and first built in 1977.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 216-217. Houghton Miff ...
*
Southern Cross 28 The Southern Cross 28, also called the Gillmer 28, is an American sailboat that was designed by Thomas C. Gillmer and first built in 1978.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 230-231. Hou ...
*
Tanzer 31 The Tanzer 31 is a Canadian sailboat, that was designed by George Cuthbertson of Cuthbertson & Cassian and first built in 1984. The design is out of production. Production Production of the boat was commenced in 1984 by Tanzer Industries of ...


References


External links

* {{DEFAULTSORT:CandC 30 Redwing Keelboats 1960s sailboat type designs Sailing yachts Sailboat type designs by C&C Design Sailboat types built by Hinterhoeller Yachts Sailboat types built by C&C Yachts