Plasticisers

A plasticizer ( UK: plasticiser) is a substance that is added to a material to make it softer and more flexible, to increase its plasticity, to decrease its viscosity, and/or to decrease friction during its handling in manufacture.

Plasticizers are commonly added to polymers such as plastics and rubber, either to facilitate the handling of the raw material during fabrication, or to meet the demands of the end product's application. For example, plasticizers are commonly added to polyvinyl chloride (PVC), which otherwise is hard and brittle, to make it soft and pliable; which makes it suitable for products such as shower curtains, vinyl flooring, clothing, bags, flexible plastic tubing, and electric wire insulation/coating.

Plasticizers are also often added to concrete formulations to make them more workable and fluid for pouring, thus allowing the water contents to be reduced. Similarly, they are often added to clays, stucco, solid rocket fuel, and other pastes prior to molding and forming. For these applications, plasticizers largely overlap with dispersants.

For polymers

Plasticizers for polymers are either liquids with low volatility or solids. According to 2017 data, the total global market for plasticizers was 7.5 million metric tonnes. In North America the 2017 volume was ~1.01 million metric tonnes and in Europe the figure was 1.35 million metric tonnes, split between various end-use applications with a chemical type trend moving to higher molecular weight (HMW) orthophthalates and alternative types following regulatory issues concerning lower molecular weight (LMW) orthophthalates.

Almost 90% of polymer plasticizers, most commonly phthalate esters, are used in PVC, giving this material improved flexibility and durability. The majority is used in films and cables.

Mechanism of action

It was commonly thought that plasticizers work by embedding themselves between the chains of polymers, spacing them apart (increasing the "free volume"), or swelling them and thus significantly lowering the glass transition temperature for the plastic and making it softer; however it was later shown that the free volume explanation could not account for all of the effects of plasticization. The classical picture on the mobility of polymer chain is more complex in the presence of plasticizer than that drawn by Fox&Flory for simple polymer chain. The molecules of plasticizer take control over mobility of the chain, and polymer chain does not show an increase of the free volume around polymer ends; in the case that the plasticizer/ water creates hydrogen bonds with hydrophilic parts of polymer, the associated free volume can be decreased.

For plastics such as PVC, the more plasticizer added, the lower their cold flex temperature will be. Plastic items containing plasticizers can exhibit improved flexibility and durability. Plasticizers can become available for exposure due to migration and abrasion of the plastic since they are not bound to the polymer matrix. The " new car smell" is often attributed to plasticizers or their degradation products. However, multiple studies on the makeup of the smell do not find phthalates in appreciable amounts, likely due to their extremely low volatility and vapor pressure.

The effect of plasticizers on elastic modulus is dependent on both temperature and plasticizer concentration. Below a certain concentration, referred to as the crossover concentration, a plasticizer can increase the modulus of a material. The material's glass transition temperature will decrease however, at all concentrations. In addition to a crossover concentration a crossover temperature exists. Below the crossover temperature the plasticizer will also increase the modulus.

Selection

Over the last 60 years more than 30,000 different substances have been evaluated for their suitability as polymer plasticizers. Of these, only a small number – approximately 50 – are today in commercial use.

Ester plasticizers are selected based upon cost-performance evaluation. The rubber compounder must evaluate ester plasticizers for compatibility, processibility, permanence and other performance properties. The wide variety of ester chemistries that are in production include sebacates, adipates, terephthalates, dibenzoates, glutarates, phthalates, azelates, and other specialty blends. This broad product line provides an array of performance benefits required for the many elastomer applications such as tubing and hose products, flooring, wall-coverings, seals and gaskets, belts, wire and cable, and print rolls.

Low to high polarity esters provide utility in a wide range of elastomers including nitrile, polychloroprene, EPDM, chlorinated polyethylene, and epichlorohydrin. Plasticizer-elastomer interaction is governed by many factors such as solubility parameter, molecular weight, and chemical structure. Compatibility and performance attributes are key factors in developing a rubber formulation for a particular application.

Plasticizers used in PVC and other plastics are often based on esters of polycarboxylic acids with linear or branched aliphatic alcohols of moderate chain length. These compounds are selected on the basis of many critieria including low toxicity, compatibility with the host material, nonvolatility, and expense. Phthalate esters of straight-chain and branched-chain alkyl alcohols meet these specifications and are common plasticizers. Ortho-phthalate esters have traditionally been the most dominant plasticizers, but regulatory concerns have led to the move away from classified substances to non-classified which includes high molecular weight ortho-phthalates and other plasticisers, especially in Europe.

Antiplasticizers

Antiplasticizers are polymer additives that have effect opposite to those of plasticizers. They increase the modulus while decreasing the glass transition temperature.

Safety and toxicity

Substantial concerns have been expressed over the safety of some polymer plasticizers, especially because some low molecular weight ortho-phthalates have been classified as potential endocrine disruptors with some developmental toxicity reported.

Common polymer plasticizers

Ortho phthalates

*Phthalate-based plasticizers are used in situations where good resistance to water and oils is required. Some common phthalate plasticizers are:

*Low Molecular Weight Ortho Phthalates
**Dimethyl phthalate (DMP), used in fragrances, as an insect repellent, and in several industrial processes as a solvent/carrier
** Diethyl phthalate (DEP), used in fragrances as a carrier and extender/fixative
**Diisobutyl phthalate (DIBP)
**Di-n-butyl phthalate (DBP), used for cellulose plastics, food wraps, adhesives, perfumes, and cosmetics - about a third of nail polishes, glosses, enamels, and hardeners contain it, together with some shampoos, sunscreens, skin emollients, and insect repellents
**Butyl benzyl phthalate (benzyl butyl phthalate, BBzP) is found in vinyl tiles, traffic cones, food conveyor belts, artificial leather, and plastic foams
** Bis(2-ethylhexyl) phthalate (DEHP) also commonly known as (dioctyl phthalate, DOP or diethylhexyl phthalate), historically used in flooring materials, medical devices, myriad consumer products, and high explosives, such as Semtex. DEHP was the most common plasticizer for decades and still holds that title globally even as it has largely been replaced now with higher molecular weight phthalates and alternatives in the US and Europe

*High Molecular Weight Ortho Phthalates
**Diisononyl phthalate (DINP), used in flooring materials, found in garden hoses, shoes, toys, and building materials
** Bis(2-propylheptyl) phthalate (DPHP), used in cables, wires and roofing materials
**Diisodecyl phthalate (DIDP), used for insulation of wires and cables, car undercoating, shoes, carpets, pool liners
** Diisoundecyl phthalate (DIUP), used for insulation of wires and cables, car undercoating, shoes, carpets, pool liners. Good high temperature and outdoor weathering performance
** Ditridecyl phthalate (DTDP) is the highest molecular weight phthalate plasticizer, providing greater performance at high temperature. It is the preferred plasticizer for automotive cable and wire application.

Terephthalates

*Terephthalates are isomeric with ortho phthalates but have proven to have cleaner toxicological results due to their inability to form stable monoesters during hydrolysis and metabolic breakdown.
** Bis(2-ethylhexyl)terephthalate (DEHT, Dioctyl terephthalate, DOTP) (Eastman Chemical Company Trademark: Eastman 168™), used as a replacement for DEHP and DINP
**Diisopentyl terephthalate (DiPT)(Evonik Industries Trademark: ELATUR® DPT), used as a replacement for DBP and DiBP
**Dibutyl terephthalate (DBT)(Eastman Chemical Trademark: Eastman Effusion™), used as a replacement for DBP and DiBP

Trimellitates

* Trimellitates are used in automobile interiors and other applications where resistance to high temperature is required. They have extremely low volatility.
**Tri-(2-ethylhexyl)trimellitate (TEHTM) (TOTM, Trioctyl Trimellitate plasticizer)
** Tri-(isononyl)trimellitate (TINTM)
** Tri-(isodecyl)trimellitate (TIDTM)
** Tri-(isotridecyl)trimellitate (TITDTM)

Adipates & Sebacates

*Adipate-based plasticizers are used for low-temperature or resistance to ultraviolet light. An example is:
** Bis(2-ethylhexyl)adipate (DEHA, dioctyl adipate plasticizer)
*Sebacate- based plasticizers provide excellent compatibility with a range of plastic materials and synthetic rubbers (specifically nitrile rubber and neoprene), superior properties at low temperatures, and good oil resistivity. Some examples are:
**Dibutyl sebacate (DBS)
** Di-(2-ethylhexyl)sebacate, Di-octyl Sebacate (or DOS plasticizer)

Organophosphates

* Organophosphates include the following:
**Tricresyl phosphate (TCP)
**2-ethylhexyldiphenyl phosphate
**Tri-2-ethylhexyl phosphate

Other

*1,2-Cyclohexane dicarboxylic acid diisononyl ester (BASF Trademark: Hexamoll DINCH)
*Bis(2-ethylhexyl) cyclohexane-1,4-dicarboxylate (Hanwha Trademark: Eco-DEHCH)
*Alkyl sulphonic acid phenyl ester (ASE). (Lanxess Chemical Trademark: Mesamoll)
*Triethylene glycol di-2ethylhexanoate (Eastman Chemical Trademark: Eastman TEG-EH)

Bio-based plasticizers have been investigated, such as glycerol triacetate (Triacetin) and acetyltributylcitrate. They are used in niche applications. Epoxidized soybean oil is used broadly as a secondary plasticizer in many vinyl applications.

*Note: Bisphenol A, or BPA, is not a plasticizer, although it is often wrongly described as one.

Plasticizers for inorganic materials

Concrete

In the concrete technology, plasticizers and superplasticizers are also called high range water reducers. When added to concrete mixtures, they confer a number of properties including improved workability