Mitchell-Lewis Motor Company
   HOME

TheInfoList



OR:

Mitchell was a major brass-era automobile marque in
Racine, Wisconsin Racine ( ) is a city in and the county seat of Racine County, Wisconsin, United States. It is located on the shore of Lake Michigan at the mouth of the Root River. Racine is situated 22 miles (35 km) south of Milwaukee and approximately 60 ...
, from 1903 to 1923.


History

Wisconsin Wheel Works was established in the 1890s by the wagon maker Mitchell & Lewis Company, Ltd. to manufacture bicycles and developed a motorcycle in 1900. The company began manufacturing automobiles in 1903 as the Mitchell Motor Car Company.


Motor Cars

The company's first models were a chain driven and water-cooled
four-stroke A four-stroke (also four-cycle) engine is an internal combustion (IC) engine in which the piston completes four separate strokes while turning the crankshaft. A stroke refers to the full travel of the piston along the cylinder, in either directio ...
4 hp and two-stroke 7hp runabout, with tiller steering and a two-speed
planetary transmission An epicyclic gear train (also known as a planetary gearset) consists of two gears mounted so that the center of one gear revolves around the center of the other. A carrier connects the centers of the two gears and rotates the planet and sun gea ...
. The cars were designed by John W. Bates, a Chicago engineer. 1904 brought air-cooling and the addition of a
four-cylinder The engine configuration describes the fundamental operating principles by which internal combustion engines are categorized. Piston engines are often categorized by their cylinder layout, valves and camshafts. Wankel engines are often categorize ...
model . By 1907 four-cylinders only were produced, improved with shaft drive on all models and all engines water-cooled. Mitchell participated in many automobile contests to show the power and reliability of their new four-cylinder cars. William T. Lewis retired in 1910 and William M. Lewis took over. The wagon business and automobile company were combined into Mitchell-Lewis Motor Company. The 1910 line of Mitchell's included two four-cylinder models and a new six-cylinder model was introduced. The Mitchell engines were cast in pairs with three-bearing
crankshafts A crankshaft is a mechanical component used in a piston engine to convert the reciprocating motion into rotational motion. The crankshaft is a rotating shaft containing one or more crankpins, that are driven by the pistons via the connecting ...
on the fours and five-bearing crankshafts on the six-cylinders.


Growth

Mitchell built virtually all of the
components Circuit Component may refer to: •Are devices that perform functions when they are connected in a circuit.   In engineering, science, and technology Generic systems * System components, an entity with discrete structure, such as an assem ...
for their cars, and the company enjoyed a reputation as a quality builder of medium-priced cars. Mitchell annual production was growing steadily from 82 cars in 1904 to 1,377 in 1907, 2,946 in 1909, 5,614 in 1910 and to just over 6,000 in 1912. This made them the leading car maker in Wisconsin. A small production of trucks and buses were run from 1905 to1908. Pricing in 1912 ran from a runabout at $950 () to a limousine at $2,250 () and Mitchell would remain in this mid-price market. French engineer Rene Petard was imported to design a new series of T- head engines which were introduced for the 1913 model year. These were called "The American built French car" in advertisements. Financial issues in 1913 caused the retirement of William Mitchell Lewis from the company and with Rene Petard, he started a new company to produce a car called the Lewis. A banker, Joseph Winterbottom, Jr. became president of Mitchell-Lewis.


Major Manufacturer

The firm was reorganized as Mitchell Motors Company, Inc. in 1916 and Mitchell sales manager Otis Friend took over the presidency. Sales in 1917 reached a record 10,938. Otis Friend left in 1918 and subsequently built a car of his own called the Friend in Pontiac, Michigan. A General Electric executive named D.C. Durland was appointed as the new president. In 1916 the four-cylinder Mitchell was dropped, and a V-8 was built that year, but from 1917 only six-cylinder cars were produced. The Mitchell introduced in 1920 had a sloping
radiator Radiators are heat exchangers used to transfer thermal energy from one medium to another for the purpose of cooling and heating. The majority of radiators are constructed to function in cars, buildings, and electronics. A radiator is always a ...
configuration and was given the epithet of "drunken Mitchell.” This styling mistake hurt sales. In 1922 a million-mile test was done by 109 Mitchell “White Streaks” which resulted in good publicity.


Fate

With the effects of styling mistakes, competition from mass producers of automobiles and the post-war depression, output had plummeted to less than 2,500 in both 1920 and 1921. Mitchell Motors Company, Inc. filed for bankruptcy in June 1923. Sales of unfinished automobiles and raw materials continued into 1924. In February 1924 the Mitchell factory was sold to Nash Motors and the Ajax automobile would be produced there.


Gallery

File:Mitchell-autos 1906.jpg, alt=, 1906 Mitchell Advertisement showing victories in motor car contests File:1908 Mitchell G Roadster (2534461431).jpg, alt=, 1908 Mitchell Model G Roadster File:Family in a 1910 Mitchell (14938558547).jpg, alt=A family packed into a 1910 Mitchell, 1910 Mitchell Model T Touring loaded with a family File:Mitchell auto. (13162849114).jpg, alt=, 1911 Mitchell Model T Touring in Christchurch New Zealand File:1912 Mitchell 2-6 50hp Runabout (5806664038).jpg, alt=, 1912 Mitchell Model 7-6 Roadster File:Mitchell Model E-40 Touring 1919.jpg, alt=Mitchell Model E-40 Touring 1919 photographed in 2008, 1919 Mitchell Model D-40 Touring File:Herald Staunton Tour, Mitchell car LCCN2016828806.jpg, alt=, 1920 Mitchell Model E-40 Touring ''(drunken Mitchell)'' File:Mitchell car LCCN2016846481.tif, alt=, 1922 Mitchell Model F-50


See also

*The
Mitchell Lewis Building The Mitchell Lewis Building is a historic building in Racine, Wisconsin, and a former office building and automobile factory for the Mitchell Motor Company. Designed by the local architectural firm of Guilbert and Funston, it was built in 1910 ...
at 815 Eighth Street in Racine was added to the National Register of Historic Places on April 20, 2005. The Racine architectural firm of
Guilbert & Funston Edmund Bailey Funston (May 19, 1868 – May 10, 1933) was an American architect in Racine, Wisconsin. He is credited with designing the Badger Building (1916). He was the founder of Edmund B. Funston Company Architects. Funston was born in Cha ...
is credited with designing the building. *The Mitchell House at 905 South Main Street was owned by Henry Mitchell of the Mitchell Wagon works and was designed by Cecil Corwin.
Mitchell Automobiles at ConceptCarz

Salisbury Commons Schedule of Events, 2010
Images of several early Mitchell cars on page 10-13 of the pdf. *
List of defunct United States automobile manufacturers This is a list of defunct automobile manufacturers of the United States. They were discontinued for various reasons, such as bankruptcy of the parent company, mergers, or being phased out. A * A Automobile Company (1910–1913) 'Blue & Gold' ...
*
Brass Era car The Brass Era is an American term for the early period of automotive manufacturing, named for the prominent brass fittings used during this time for such things as lights and radiators. It is generally considered to encompass 1896 through 1915 ...


References

{{DEFAULTSORT:Mitchell Motor Car Company 1900s cars 1910s cars 1920s cars Defunct motor vehicle manufacturers of the United States Companies based in Racine, Wisconsin Brass Era vehicles Vintage vehicles Veteran vehicles Motor vehicle manufacturers based in Wisconsin Cars introduced in 1903 Vehicle manufacturing companies established in 1903 Vehicle manufacturing companies disestablished in 1923