A low-energy house is characterized by an energy-efficient design and technical features which enable it to provide high living standards and comfort with low energy consumption and carbon emissions. Traditional heating and active cooling systems are absent, or their use is secondary.
Low-energy buildings may be viewed as examples of
sustainable architecture
Sustainable architecture is architecture that seeks to minimize the negative environmental impact of buildings through improved efficiency and moderation in the use of materials, energy, development space and the ecosystem at large. Sustainable ...
. Low-energy houses often have
active
Active may refer to:
Music
* ''Active'' (album), a 1992 album by Casiopea
* Active Records, a record label
Ships
* ''Active'' (ship), several commercial ships by that name
* HMS ''Active'', the name of various ships of the British Royal ...
and
passive solar building design
In passive solar building design, windows, walls, and floors are made to collect, store, reflect, and distribute solar energy, in the form of heat in the winter and reject solar heat in the summer. This is called passive solar design because, unli ...
and components, which reduce the house's energy consumption and minimally impact the resident's lifestyle. Throughout the world, companies and non-profit organizations provide guidelines and issue certifications to guarantee the energy performance of buildings and their processes and materials. Certifications include passive house, BBC - Bâtiment Basse Consommation - Effinergie (France), zero-carbon house (UK), and
Minergie
Minergie is a registered quality label for new and refurbished low-energy-consumption buildings. This label is mutually supported by the Swiss Confederation, the Swiss Cantons and the Principality of Liechtenstein along with Trade and Industry. T ...
(
Switzerland
). Swiss law does not designate a ''capital'' as such, but the federal parliament and government are installed in Bern, while other federal institutions, such as the federal courts, are in other cities (Bellinzona, Lausanne, Luzern, Neuchâtel ...
).
Background
During the 1970s, experimental initiatives for low-energy buildings were made in
Denmark
)
, song = ( en, "King Christian stood by the lofty mast")
, song_type = National and royal anthem
, image_map = EU-Denmark.svg
, map_caption =
, subdivision_type = Sovereign state
, subdivision_name = Danish Realm, Kingdom of Denmark
...
, the
United States
The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territorie ...
,
Sweden
Sweden, formally the Kingdom of Sweden,The United Nations Group of Experts on Geographical Names states that the country's formal name is the Kingdom of SwedenUNGEGN World Geographical Names, Sweden./ref> is a Nordic country located on ...
,
Canada
Canada is a country in North America. Its ten provinces and three territories extend from the Atlantic Ocean to the Pacific Ocean and northward into the Arctic Ocean, covering over , making it the world's second-largest country by tot ...
, and
Germany
Germany,, officially the Federal Republic of Germany, is a country in Central Europe. It is the second most populous country in Europe after Russia, and the most populous member state of the European Union. Germany is situated betwe ...
. The German
Passivhaus Institute introduced the first passive house in 1990. The implementation of standardized low-energy building concepts has developed differently in each country.
Buildings alone are responsible for 38% of all human
GHG emissions
Greenhouse gas emissions from human activities strengthen the greenhouse effect, contributing to climate change. Most is carbon dioxide from burning fossil fuels: coal, oil, and natural gas. The largest emitters include coal in China and larg ...
(20% residential, 18% commercial) as of 2008. According to the
Intergovernmental Panel on Climate Change
The Intergovernmental Panel on Climate Change (IPCC) is an intergovernmental body of the United Nations. Its job is to advance scientific knowledge about climate change caused by human activities. The World Meteorological Organization (WMO) a ...
(IPCC), buildings is the sector which presents the most cost effective opportunities for GHG reductions.
United States
Interest in low-energy buildings has increased in the United States, primarily due to rising energy prices, decreasing costs for onsite renewable-energy systems, and increasing concern about climate change.
California
California is a U.S. state, state in the Western United States, located along the West Coast of the United States, Pacific Coast. With nearly 39.2million residents across a total area of approximately , it is the List of states and territori ...
requires all new residential construction to be
zero net energy by 2020.
Germany
Triggered in the 1970s by the first energy crisis and growing environmental awareness, energy conservation became increasingly important in Germany. In 1977, the country's first energy-related building standard was enacted. The annual heating requirement was introduced as an important parameter by the third German Thermal Insulation Ordinance (1995). In 2013, however, there was no clear legal requirement for a low-energy building standard in Germany. According to Maria Panagiotidou and Robert J. Fuller, definitions, policies and construction activity of zero-energy buildings must be clear. The
European Union
The European Union (EU) is a supranational political and economic union of member states that are located primarily in Europe. The union has a total area of and an estimated total population of about 447million. The EU has often been des ...
's Energy Performance Directive requires that beginning in 2021, only low-energy buildings may be built.
United Kingdom
Changes to national policies have occurred since May 2015 in the UK. One of the most significant has been the withdrawal of the
Code for Sustainable Homes The Code for Sustainable Homes was an environmental assessment method for rating and certifying the performance of new homes in United Kingdom. First introduced in 2006, it is a national standard for use in the design and construction of new homes ...
(CfSH) as a system for assessing and encouraging improvements in the environmental design of dwellings. This has abandoned the code's schematic which provided a framework of achievement levels and to which low-energy designers could aspire to meet or surpass. Although energy-conservation legislation still exists in the
building regulations, there is a lack of suitable standards exceeding basic regulations. As a result, the Passive House Standard may expand its influence and impact on energy-efficient houses.
National standards
The term "low-energy houses" may refer to national building standards. These standards sometimes seek to limit the energy used for
space heating
Heating, ventilation, and air conditioning (HVAC) is the use of various technologies to control the temperature, humidity, and purity of the air in an enclosed space. Its goal is to provide thermal comfort and acceptable indoor air quality. HV ...
, which is the largest energy consumer in many
climate zones
Climate classifications are systems that categorize the world's climates. A climate classification may correlate closely with a biome classification, as climate is a major influence on life in a region. One of the most used is the Köppen climate ...
. Other energy uses may also be regulated. The
history of passive solar building design The passive solar design of buildings includes consideration of their orientation to the sun and their thermal mass, factors which have been incorporated to a greater or lesser extent in vernacular architecture for thousands of years. Ancient Greeks ...
provides an international view of one form of low-energy-building development and standards.
Europe
Standards for low-energy buildings in Europe have proceeded differently in each country, and there is no common certification or legislation for low-energy buildings valid in all EU member states. As a movement towards reducing energy use and emissions, a common legislation concerning buildings’ energy performance, the
Energy Performance of Buildings Directive
The Energy Performance of Buildings Directive2010/31/EC the "EPBD") is the European Union's main legislative instrument aiming to promote the improvement of the energy performance of buildings within the European Union. It was inspired by the Kyoto ...
(EPBD) was published in 2002 and became effective in January 2003.
Norway
In NS 3700, the draft official standard, low-energy buildings are defined. About the buildings' energy performance, two alternatives for rating their primary energy use are under discussion:
* A limit on a building's annual
CO2 emissions, calculated by multiplying the annual supplied energy by a CO
2 factor
* A percentage of its heating demand must be met with renewable energy.
Denmark
Low-energy houses are defined in the National Building Regulation Building Regulations 08, and are divided into two classes. They are regulated in the regulations' chapter 7.2.4: Low-energy.
Germany
Low-energy houses certified by RAL-GZ 965 have 30 percent less heat losses than regulated in the EnEV, a national building code. Other criteria affect
insulation
Insulation may refer to:
Thermal
* Thermal insulation, use of materials to reduce rates of heat transfer
** List of insulation materials
** Building insulation, thermal insulation added to buildings for comfort and energy efficiency
*** Insulated ...
,
air tightness and
ventilation
Ventilation may refer to:
* Ventilation (physiology), the movement of air between the environment and the lungs via inhalation and exhalation
** Mechanical ventilation, in medicine, using artificial methods to assist breathing
*** Ventilator, a m ...
. Low-energy buildings may be certified by RAL-GZ 965 for planning or construction.
Switzerland
Low-energy buildings may receive the
Minergie
Minergie is a registered quality label for new and refurbished low-energy-consumption buildings. This label is mutually supported by the Swiss Confederation, the Swiss Cantons and the Principality of Liechtenstein along with Trade and Industry. T ...
certification, a "quality label for new and refurbished buildings". The Minergie standard requires that buildings do not exceed 75 percent of average building energy consumption and fossil-fuel consumption must not exceed 50 percent of the average.
North America
The European Union directive has clarified low-energy houses in Europe, and a large portion of the discussions on zero-energy building in North America derives from the U.S.
National Renewable Energy Laboratory
The National Renewable Energy Laboratory (NREL) in the US specializes in the research and development of renewable energy, energy efficiency, energy systems integration, and sustainable transportation. NREL is a federally funded research and d ...
(NREL).
The
Energy Star
Energy Star (trademarked ''ENERGY STAR'') is a program run by the U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy (DOE) that promotes energy efficiency. The program provides information on the energy consumption of pr ...
program is the largest certifier of low-energy homes and
consumer product
A final good or consumer good is a final product ready for sale that is used by the consumer to satisfy current wants or needs, unlike a intermediate good, which is used to produce other goods. A microwave oven or a bicycle is a final good, but ...
s in the U.S. Although certified Energy Star homes use at least 15 percent less energy than standard new homes built in accordance with the International Residential Code, they typically achieve a 20- to 30-percent savings. The
United States Department of Energy
The United States Department of Energy (DOE) is an executive department of the U.S. federal government that oversees U.S. national energy policy and manages the research and development of nuclear power and nuclear weapons in the United Stat ...
introduced a program in 2008 to distribute zero-energy housing across the country.
Canadian builders may use a range of standards, labels, and certification programs to demonstrate a high level of energy performance in a given project. These include:
*Net Zero Home and Net Zero Ready Home certifications, administered by the
Canadian Home Builders' Association
The Canadian Home Builders' Association (CHBA) is a not-for-profit organization representing residential construction and related industry firms in Canada. It was founded in 1943, following closely the adoption of the National Building Code of Cana ...
*Built Green labels, administered by
Built Green Canada
Built may refer to:
* ''Built'' (TV series), an American reality television series that aired on the Style Network
*''Built: the hidden stories behind our structures'', 2018 book by Roma Agrawal
* Building
Built different definition- Levi on P ...
*Energy Star for Homes, administered by
Natural Resources Canada
Natural Resources Canada (NRCan; french: Ressources naturelles Canada; french: RNCan, label=none)Natural Resources Canada is the applied title under the Federal Identity Program; the legal title is Department of Natural Resources (). is the depa ...
*The Canadian Passive House standard, administered by the Canadian Passive House Institute
In
British Columbia
British Columbia (commonly abbreviated as BC) is the westernmost province of Canada, situated between the Pacific Ocean and the Rocky Mountains. It has a diverse geography, with rugged landscapes that include rocky coastlines, sandy beaches, ...
the above programs align with the
BC Energy Step Code
The BC Energy Step Code is a provincial regulation that local governments in British Columbia, Canada, may use, if they wish, to incentivize or require a level of energy efficiency in new construction that goes above and beyond the requirements of ...
, a provincial regulation to incentivize (or require) a level of energy efficiency in new construction beyond the base building code. The code was designed as a technical road map to help the province reach its target of all new net-zero-energy-ready buildings by 2032.
Types
Low-energy houses are broadly defined, but are generally known as houses with a lower energy demand than common buildings regulated by the national building code. The term "low-energy house" is used in some countries for a specific type of building.
A low-energy house is a guideline rarely specified in actual values (heat load or space-heating minimum). A passive house is a standard, with specific recommendations to save heating energy.
At one end of the spectrum are buildings with an ultra-low space-heating requirement which require low levels of imported energy (even in winter), approaching an
autonomous building
An autonomous building is a building designed to be operated independently from infrastructural support services such as the electric power grid, gas grid, municipal water systems, sewage treatment systems, storm drains, communication services, ...
. At the opposite end are buildings where few attempts are made to reduce their space-heating requirement and which use high levels of imported energy in winter. Although this may be balanced by high levels of renewable-energy generation throughout the year, it imposes greater demands on the national energy infrastructure during winter.
Obstacles and opportunities
Energy-efficient design often relies on new technologies and techniques. These may create technical obstacles in addition to social, cultural, and economic non-technical obstacles. Despite these obstacles, opportunities exist for skilled, knowledgeable professions to create cost-efficient solutions for energy efficiency in buildings.
Buildings designed for good energy efficiency do not always live up to the design goals; various reasons lead to this
performance gap
A performance gap is a disparity that is found between the energy use predicted and carbon emissions in the design stage of buildings and the energy use of those buildings in operation. Research in the UK suggests that actual carbon emissions from ...
.
Technology
Low-energy building design is considered important to encourage
resource efficiency Resource efficiency is the maximising of the supply of money, materials, staff, and other assets that can be drawn on by a person or organization in order to function effectively, with minimum wasted (natural) resource expenses. It means using the ...
and reduce global
climate change
In common usage, climate change describes global warming—the ongoing increase in global average temperature—and its effects on Earth's climate system. Climate change in a broader sense also includes previous long-term changes to E ...
associated with the burning of
fossil fuel
A fossil fuel is a hydrocarbon-containing material formed naturally in the Earth's crust from the remains of dead plants and animals that is extracted and burned as a fuel. The main fossil fuels are coal, oil, and natural gas. Fossil fuels m ...
s. Design involves two general strategies: minimizing the need for energy use in buildings (especially for heating and cooling) through energy-efficient measures (EEMs) and adopting
renewable energy
Renewable energy is energy that is collected from renewable resources that are naturally replenished on a human timescale. It includes sources such as sunlight, wind, the movement of water, and geothermal heat. Although most renewable energy ...
and other technologies (RETs) to meet remaining energy needs. EEMs include
building envelope A building envelope is the physical separator between the conditioned and unconditioned environment of a building including the resistance to air, water, heat, light, and noiseSyed, Asif. ''Advanced building technologies for sustainability''. Hoboke ...
s, internal conditions, and building-services systems; RETs include
photovoltaic
Photovoltaics (PV) is the conversion of light into electricity using semiconducting materials that exhibit the photovoltaic effect, a phenomenon studied in physics, photochemistry, and electrochemistry. The photovoltaic effect is commercially us ...
or building-integrated photovoltaic,
wind turbine
A wind turbine is a device that converts the kinetic energy of wind into electrical energy. Hundreds of thousands of large turbines, in installations known as wind farms, now generate over 650 gigawatts of power, with 60 GW added each year. ...
s, solar thermal (solar water heaters),
heat pump
A heat pump is a device that can heat a building (or part of a building) by transferring thermal energy from the outside using a refrigeration cycle. Many heat pumps can also operate in the opposite direction, cooling the building by removing h ...
s, and
district heating
District heating (also known as heat networks or teleheating) is a system for distributing heat generated in a centralized location through a system of insulated pipes for residential and commercial heating requirements such as space heating a ...
and cooling. Impacts include life-cycle costs, environmental impacts, and climate-change and social-policy issues. The best low-energy designs offer occupants a better environment and more stable, controlled thermal comfort in addition to reduced energy costs.
GHG emissions associated with buildings construction are mainly coming from:
# Materials manufacturing (e.g., concrete)
# Materials transport
# Demolition wastes transport
# Demolition wastes treatment
The construction, renovation, and deconstruction of a typical building is on average responsible for the emissions of 1,000-1,500 kgCO2e/m2 (around 500 kgCO2e/m2 for construction only).
Strategies adopted by low-carbon buildings to reduce GHG emissions during construction include:
# Reduce quantity of materials used
# Select materials with low emissions factors associated (e.g., recycled materials)
# Select materials suppliers as close as possible to the construction.
# Divert demolition wastes to recycling instead of landfills or incineration
Energy efficiency
Reduction of energy consumption is more environmentally and financially advantageous than increasing onsite production to reach a low-energy goal. The less a home consumes, the smaller renewable-energy system it requires to reach net zero. Energy efficiency should always be the primary design strategy of a low-energy house.
Improvements
*
Absorption refrigerator
An absorption refrigerator is a refrigerator that uses a heat source (e.g., solar energy, a fossil-fueled flame, waste heat from factories, or district heating systems) to provide the energy needed to drive the cooling process. The system uses tw ...
*
Annualized geo solar
*
Earth cooling tubes
A ground-coupled heat exchanger is an underground heat exchanger that can capture heat from and/or dissipate heat to the ground. They use the Earth's near constant subterranean temperature to warm or cool air or other fluids for residential, agric ...
*
Geothermal heat pump
A ground source heat pump (also geothermal heat pump) is a heating/cooling system for buildings that uses a type of heat pump to transfer heat to or from the ground, taking advantage of the relative constancy of temperatures of the earth through ...
*
Heat recovery ventilation
Heat recovery ventilation (HRV), also known as mechanical ventilation heat recovery (MVHR), is an energy recovery ventilation system which works between two air sources at different temperatures. Heat recovery is a method which is used to reduce ...
*
Water heat recycling
Water heat recycling (also known as drain water heat recovery, waste water heat recovery, greywater heat recovery, or sometimes shower water heat recovery) is the use of a heat exchanger to recover energy and reuse heat from drain water from vario ...
*
Passive cooling
*
Renewable heat Renewable heat is an application of renewable energy referring to the generation of heat from renewable sources; for example, feeding radiators with water warmed by focused solar radiation rather than by a fossil fuel boiler. Renewable heat technol ...
*
Seasonal thermal energy storage
Seasonal thermal energy storage (STES), also known as inter-seasonal thermal energy storage,
is the storage of heat or cold for periods of up to several months. The thermal energy can be collected whenever it is available and be used whenever nee ...
(STES)
*
Solar air conditioning
Solar air conditioning, or "solar-powered air conditioning", refers to any air conditioning (cooling) system that uses solar power.
This can be done through passive solar design, solar thermal energy conversion, and photovoltaic conversion (sunli ...
*
Solar hot water
*
Solar devices
Passive solar design and landscaping
Passive solar building design
In passive solar building design, windows, walls, and floors are made to collect, store, reflect, and distribute solar energy, in the form of heat in the winter and reject solar heat in the summer. This is called passive solar design because, unli ...
and
energy-efficient landscaping
Energy-efficient landscaping is a type of landscaping designed for the purpose of conserving energy. There is a distinction between the embedded energy of materials and constructing the landscape, and the energy consumed by the maintenance and ope ...
support the low-energy house in conservation and can integrate it into a neighborhood and environment. Following
passive solar building techniques, where buildings are compact in shape to reduce surface area and principal windows oriented towards the
equator
The equator is a circle of latitude, about in circumference, that divides Earth into the Northern and Southern hemispheres. It is an imaginary line located at 0 degrees latitude, halfway between the North and South poles. The term can als ...
(south in the
Northern Hemisphere
The Northern Hemisphere is the half of Earth that is north of the Equator. For other planets in the Solar System, north is defined as being in the same celestial hemisphere relative to the invariable plane of the solar system as Earth's Nort ...
and north in the
Southern Hemisphere) maximizes passive
solar gain
Solar gain (also known as solar heat gain or passive solar gain) is the increase in thermal energy of a space, object or structure as it absorbs incident solar radiation. The amount of solar gain a space experiences is a function of the total in ...
. However, solar gain (especially in
temperate climate
In geography, the temperate climates of Earth occur in the middle latitudes (23.5° to 66.5° N/S of Equator), which span between the tropics and the polar regions of Earth. These zones generally have wider temperature ranges throughout t ...
s) is secondary to minimizing the overall house-energy requirements. In hot temperatures, excess heat can create uncomfortable indoor conditions. Passive alternatives to air-conditioning systems, such as temperature-dependent venting, have been shown to be effective in regions with cooling needs.
[Reda, F., Tuominen, P., Hedman, Å., Ibrahim, M.G.E.: "Low-energy residential buildings in New Borg El Arab: Simulation and survey based energy assessment". ''Energy and Buildings'', Volume 93, 15 April 2015, pp. 65-82.] Other techniques to reduce excess solar heat include
brise-soleils,
tree
In botany, a tree is a perennial plant with an elongated stem, or trunk, usually supporting branches and leaves. In some usages, the definition of a tree may be narrower, including only woody plants with secondary growth, plants that are ...
s, attached
pergola
A pergola is most commonly an outdoor garden feature forming a shaded walkway, passageway, or sitting area of vertical posts or pillars that usually support cross-beams and a sturdy open lattice, often upon which woody vines are trained. The ...
s with
vine
A vine (Latin ''vīnea'' "grapevine", "vineyard", from ''vīnum'' "wine") is any plant with a growth habit of trailing or scandent (that is, climbing) stems, lianas or runners. The word ''vine'' can also refer to such stems or runners themselv ...
s,
vertical gardens, and
green roof
A green roof or living roof is a roof of a building that is partially or completely covered with vegetation and a growing medium, planted over a waterproofing membrane. It may also include additional layers such as a root barrier and drainage ...
s.
Although low-energy houses can be constructed from dense or lightweight materials, internal
thermal mass
In building design, thermal mass is a property of the mass of a building that enables it to store heat and provide inertia against temperature fluctuations. It is sometimes known as the thermal flywheel effect. The thermal mass of heavy structura ...
is normally incorporated to reduce summer peak temperatures, maintain stable winter temperatures, and prevent possible overheating in spring or autumn before the higher
sun angle "shades" midday wall exposure and window penetration. Exterior wall color (when the surface allows choice) reflection or absorption depends on the predominant year-round outdoor temperature. The use of
deciduous
In the fields of horticulture and Botany, the term ''deciduous'' () means "falling off at maturity" and "tending to fall off", in reference to trees and shrubs that seasonally shed leaves, usually in the autumn; to the shedding of petals, aft ...
trees and wall
trellised (or self-attaching) vines can assist in temperate climates.
Lighting and electrical appliances
To minimize total primary energy consumption,
passive
Passive may refer to:
* Passive voice, a grammatical voice common in many languages, see also Pseudopassive
* Passive language, a language from which an interpreter works
* Passivity (behavior), the condition of submitting to the influence of on ...
and
active daylighting are the first daytime solutions to employ. For low-light days, non-daylight spaces and nighttime, sustainable lighting design with low-energy sources (such as standard-voltage
compact fluorescent lamp
A compact fluorescent lamp (CFL), also called compact fluorescent light, energy-saving light and compact fluorescent tube, is a fluorescent lamp designed to replace an incandescent light bulb; some types fit into light fixtures designed for inca ...
s and
solid-state lighting
Solid-state lighting (SSL) is a type of lighting that uses semiconductor light-emitting diodes (LEDs), organic light-emitting diodes (OLED), or polymer light-emitting diodes (PLED) as sources of illumination rather than electrical filaments, pl ...
with
LED lamp
An LED lamp or LED light bulb is an electric light that produces light using light-emitting diodes (LEDs). LED lamps are significantly more energy-efficient than equivalent incandescent lamps
and can be significantly more efficient than mos ...
s,
OLED
An organic light-emitting diode (OLED or organic LED), also known as organic electroluminescent (organic EL) diode, is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound that emits light i ...
s and
polymer light-emitting diodes and low-voltage
incandescent light bulb
An incandescent light bulb, incandescent lamp or incandescent light globe is an electric light with a wire filament heated until it glows. The filament is enclosed in a glass bulb with a vacuum or inert gas to protect the filament from oxida ...
s,
compact metal halide,
xenon
Xenon is a chemical element with the symbol Xe and atomic number 54. It is a dense, colorless, odorless noble gas found in Earth's atmosphere in trace amounts. Although generally unreactive, it can undergo a few chemical reactions such as the ...
and
halogen lamp
A halogen lamp (also called tungsten halogen, quartz-halogen, and quartz iodine lamp) is an incandescent lamp consisting of a tungsten filament sealed in a compact transparent envelope that is filled with a mixture of an inert gas and a small ...
s) can be used.
Solar-powered exterior security and
landscape lighting
Landscape lighting or garden lighting refers to the use of outdoor illumination of private gardens and public landscapes; for the enhancement and purposes of safety, nighttime aesthetics, accessibility, security, recreation and sports, and socia ...
, with
solar cell
A solar cell, or photovoltaic cell, is an electronic device that converts the energy of light directly into electricity by the photovoltaic effect, which is a physical and chemical phenomenon. s on each fixture or connecting to a central
solar panel
A solar cell panel, solar electric panel, photo-voltaic (PV) module, PV panel or solar panel is an assembly of photovoltaic solar cells mounted in a (usually rectangular) frame, and a neatly organised collection of PV panels is called a photo ...
, are available for gardens and outdoor needs. Low-voltage systems can be used for more controlled (or independent) illumination, using less electricity than conventional fixtures and lamps. Timers,
motion detection
Motion detection is the process of detecting a change in the position of an object relative to its surroundings or a change in the surroundings relative to an object. It can be achieved by either mechanical or electronic methods. When it is done by ...
and
daylighting
Daylighting is the practice of placing windows, skylights, other openings, and Reflective surfaces (climate engineering), reflective surfaces so that sunlight (direct or indirect) can provide effective internal lighting. Particular attention is ...
operation sensors further reduce energy consumption and
light pollution
Light pollution is the presence of unwanted, inappropriate, or excessive use of artificial Visible spectrum, lighting. In a descriptive sense, the term ''light pollution'' refers to the effects of any poorly implemented lighting, during the day ...
.
Home appliance
A home appliance, also referred to as a domestic appliance, an electric appliance or a household appliance, is a machine which assists in household functions such as cooking, cleaning and food preservation.
Appliances are divided into three ty ...
s meeting independent energy-efficiency testing and receiving
Ecolabel
Ecolabels (also "Eco-Labels") and Green Stickers are labeling systems for food and consumer products. The use of ecolabels is voluntary, whereas green stickers are mandated by law; for example, in North America major appliances and automobiles us ...
certification mark
A certification mark (or conformity mark) on a commercial product indicates the existence of an accepted product standard or regulation and a claim that the manufacturer has verified compliance with those standards or regulations. The specific ...
s for reduced electrical and natural-gas consumption and product-manufacturing
carbon emission label A carbon emission label or carbon label describes the carbon dioxide emissions created as a by-product of manufacturing, transporting, or disposing of a consumer product. This information is important to consumers wishing to minimize their ecologic ...
s are preferred for low-energy houses. Energy Star and
EKOenergy
EKOenergy is an ecolabel for electricity. It is a not-for-profit initiative of the EKOenergy Network, a group of more than 40 environmental organizations from 30 countries. EKOenergy started in 2013 in Europe. Its secretariat is based in Helsinki. ...
are other certification marks.
See also
''Buildings''
*
Zero-energy building
A Zero Energy Building (ZEB), also known as a Net Zero Energy (NZE) building, is a building with net zero energy consumption, meaning the total amount of energy used by the building on an annual basis is equal to the amount of renewable energy ...
*
Self-sufficient homes
An autonomous building is a building designed to be operated independently from infrastructural support services such as the electric power grid, gas grid, municipal water systems, sewage treatment systems, storm drains, communication service ...
*
PlusEnergy buildings
*
Energy-plus buildings
*
Green building
Green building (also known as green construction or sustainable building) refers to both a structure and the application of processes that are environmentally responsible and resource-efficient throughout a building's life-cycle: from planni ...
*
Energy audit
''Air and temperature''
*
Renewable heat Renewable heat is an application of renewable energy referring to the generation of heat from renewable sources; for example, feeding radiators with water warmed by focused solar radiation rather than by a fossil fuel boiler. Renewable heat technol ...
*
Solar thermal collector
A solar thermal collector collects heat by absorbing sunlight. The term "solar collector" commonly refers to a device for solar hot water heating, but may refer to large power generating installations such as solar parabolic troughs and sola ...
*
Solar air heat
Solar air heating is a solar thermal technology in which the energy from the sun, insolation, is captured by an absorbing medium and used to heat air. Solar air heating is a renewable energy heating technology used to heat or condition air for buil ...
*
Solar air conditioning
Solar air conditioning, or "solar-powered air conditioning", refers to any air conditioning (cooling) system that uses solar power.
This can be done through passive solar design, solar thermal energy conversion, and photovoltaic conversion (sunli ...
*
Thermal conductivity
The thermal conductivity of a material is a measure of its ability to conduct heat. It is commonly denoted by k, \lambda, or \kappa.
Heat transfer occurs at a lower rate in materials of low thermal conductivity than in materials of high thermal ...
*
Superinsulation
Superinsulation is an approach to building design, construction, and retrofitting that dramatically reduces heat loss (and gain) by using much higher levels of insulation and airtightness than normal. Superinsulation is one of the ancestors of t ...
*
Quadruple glazing
Standard quadruple glazed window - openable
The quadruple glazing, Q-Air, on Deg 8 building in Oslo, Norway (2020). Renovation brings Ug value of 0,29 W/(m2K) -value 20Quadruple glazing (quadruple-pane insulating glazing) is a type of insulated ...
''Solar''
*
Passive solar building design
In passive solar building design, windows, walls, and floors are made to collect, store, reflect, and distribute solar energy, in the form of heat in the winter and reject solar heat in the summer. This is called passive solar design because, unli ...
*
History of passive solar building design The passive solar design of buildings includes consideration of their orientation to the sun and their thermal mass, factors which have been incorporated to a greater or lesser extent in vernacular architecture for thousands of years. Ancient Greeks ...
*
Energy-saving lighting
Various governments have passed regulations to phase out manufacturing or importation of incandescent light bulbs for general lighting in favor of more energy- efficient alternatives. The regulations are generally based on efficiency, rather t ...
*
Solar access
*
List of pioneering solar buildings
The following buildings are of significance in pioneering the use of solar powered building design:
* MIT Solar House #1, Massachusetts, United States ( Hoyt C. Hottel & others, 1939)
* Howard Sloan House, Glenview, Illinois, United States (Geo ...
*
Sustainability
Specific definitions of sustainability are difficult to agree on and have varied in the literature and over time. The concept of sustainability can be used to guide decisions at the global, national, and individual levels (e.g. sustainable livi ...
*
Sustainable energy
Energy is sustainable if it "meets the needs of the present without compromising the ability of future generations to meet their own needs". Most definitions of sustainable energy include considerations of environmental aspects such as greenh ...
*
Green building
Green building (also known as green construction or sustainable building) refers to both a structure and the application of processes that are environmentally responsible and resource-efficient throughout a building's life-cycle: from planni ...
*
Sustainable refurbishment
''Energy rating standards''
*
House Energy Rating
The Nationwide House Energy Rating Scheme (NatHERS) is a national scheme to measure the energy efficiency of a residential dwelling in Australia. An accredited software tool assesses the home based on a variety of criteria and produces an energ ...
(Australia)
*
Home energy rating (United States)
*
EnerGuide
EnerGuide is the official Government of Canada mark associated with the labelling and rating of the energy consumption or energy efficiency of specific products. The EnerGuide's efficiency percent is calculated by dividing the power output by power ...
(Canada)
*
National Home Energy Rating
The National Home Energy Rating Scheme (NHER) is both a UK accreditation scheme for energy assessors and a rating scale for the energy efficiency of housing.
The NHER was owned and operated by National Energy Services (NES). Until 2011, NES was ...
(United Kingdom)
*
LEED - (Leadership in Energy and Environmental Design)
*
Carbon emission label A carbon emission label or carbon label describes the carbon dioxide emissions created as a by-product of manufacturing, transporting, or disposing of a consumer product. This information is important to consumers wishing to minimize their ecologic ...
*
Low-carbon economy
A low-carbon economy (LCE) or decarbonised economy is an economy based on energy sources that produce low levels of greenhouse gas (GHG) emissions. GHG emissions due to human activity are the dominant cause of observed climate change since the mi ...
References
Further reading
*Voss, Karsten and Musall, Eike. ''Net zero energy buildings - International projects of
carbon neutrality
Carbon neutrality is a state of net-zero carbon dioxide emissions. This can be achieved by balancing emissions of carbon dioxide with its removal (often through carbon offsetting) or by eliminating emissions from society (the transition to the "p ...
in buildings''. 2nd edition, November 2012, Institut für internationale Architektur-Dokumentation GmbH & Co. KG, München, .
*Raad Z. Homod, ''Intelligent HVAC Control for High Energy Efficiency in Buildings''.
Lambert Academic Publishing
Omniscriptum Publishing Group, formerly known as VDM Verlag Dr. Müller, is a German publishing company, publishing group headquartered in Riga, Riga, Latvia. Founded in 2002 in Düsseldorf, its book production is based on print on demand, prin ...
(2014), .
External links
bigEE - Your guide to energy efficiency in buildingsIEA research program "Net Zero Energy Solar Buildings"IEA Energy Conservation in Buildings and Community Systems Programme.Common Fire Foundationoverview of green building and information on the net-zero-energy Greenest Building in the Eastern US
Article on Low-Energy Housing
Examples
World Map of international known Net Zero Energy BuildingsBuilding of low energy houses with Insulating Concrete Forms
{{Authority control
Low-energy building
Sustainable architecture
Sustainable building
Energy conservation
Building
House types
Sustainable urban planning