Lomb Periodogram

Least-squares spectral analysis (LSSA) is a method of estimating a frequency spectrum, based on a least squares fit of sinusoids to data samples, similar to Fourier analysis. Fourier analysis, the most used spectral method in science, generally boosts long-periodic noise in long gapped records; LSSA mitigates such problems. Unlike with Fourier analysis, data need not be equally spaced to use LSSA.

LSSA is also known as the Vaníček method or the Gauss-Vaniček method after Petr Vaníček, and as the Lomb method or the Lomb–Scargle periodogram, based on the contributions of Nicholas R. Lomb and, independently, Jeffrey D. Scargle.

Historical background

The close connections between Fourier analysis, the periodogram, and least-squares fitting of sinusoids have long been known.
Most developments, however, are restricted to complete data sets of equally spaced samples. In 1963, Freek J. M. Barning of Mathematisch Centrum, Amsterdam, handled unequally spaced data by similar techniques, including both a periodogram analysis equivalent to what is now referred to the Lomb method, and least-squares fitting of selected frequencies of sinusoids determined from such periodograms, connected by a procedure that is now known as matching pursuit with post-backfitting or orthogonal matching pursuit.

Petr Vaníček, a Canadian geodesist of the University of New Brunswick, also proposed the matching-pursuit approach, which he called "successive spectral analysis" and the result a "least-squares periodogram", with equally and unequally spaced data, in 1969. He generalized this method to account for systematic components beyond a simple mean, such as a "predicted linear (quadratic, exponential, ...) secular trend of unknown magnitude", and applied it to a variety of samples, in 1971.

The Vaníček method was then simplified in 1976 by Nicholas R. Lomb of the University of Sydney, who pointed out its close connection to periodogram analysis. The definition of a periodogram of unequally spaced data was subsequently further modified and analyzed by Jeffrey D. Scargle of NASA Ames Research Center, who showed that with minor changes it could be made identical to Lomb's least-squares formula for fitting individual sinusoid frequencies.

Scargle states that his paper "does not introduce a new detection technique, but instead studies the reliability and efficiency of detection with the most commonly used technique, the periodogram, in the case where the observation times are unevenly spaced," and further points out in reference to least-squares fitting of sinusoids compared to periodogram analysis, that his paper "establishes, apparently for the first time, that (with the proposed modifications) these two methods are exactly equivalent."

Press summarizes the development this way:

In 1989, Michael J. Korenberg of Queen's University in Kingston, Ontario, developed the "fast orthogonal search" method of more quickly finding a near-optimal decomposition of spectra or other problems, similar to the technique that later became known as orthogonal matching pursuit.

Method variants

The Vaníček method

In the Vaníček method, a discrete data set is approximated by a weighted sum of sinusoids of progressively determined frequencies, using a standard linear regression, or least-squares fit.Wells, D.E., P. Vaníček, S. Pagiatakis, 1985. Least-squares spectral analysis revisited. Department of Surveying Engineering Technical Report 84, University of New Brunswick, Fredericton, 68 pages, Available a

The frequencies are chosen using a method similar to Barning's, but going further in optimizing the choice of each successive new frequency by picking the frequency that minimizes the residual after least-squares fitting (equivalent to the fitting technique now known as matching pursuit with pre-backfitting). The number of sinusoids must be less than or equal to the number of data samples (counting sines and cosines of the same frequency as separate sinusoids).

A data vector ''Φ'' is represented as a weighted sum of sinusoidal basis functions, tabulated in a matrix A by evaluating each function at the sample times, with weight vector ''x'':

:$\phi \approx \textbfx$

where the weight vector ''x'' is chosen to minimize the sum of squared errors in approximating ''Φ''. The solution for ''x'' is closed-form, using standard linear regression:

:$x = (\textbf^\textbf)^\textbf^\phi.$

Here the matrix A can be based on any set of functions that are mutually independent (not necessarily orthogonal) when evaluated at the sample times; for spectral analysis, the functions used are typically sines and cosines evenly distributed over the frequency range of interest. If too many frequencies are chosen in a too-narrow frequency range, the functions will not be sufficiently independent, the matrix will be badly conditioned, and the resulting spectrum will not be meaningful.

When the basis functions in A are orthogonal (that is, not correlated, meaning the columns have zero pair-wise dot products), the matrix A^TA is a diagonal matrix; when the columns all have the same power (sum of squares of elements), then that matrix is an identity matrix times a constant, so the inversion is trivial. The latter is the case when the sample times are equally spaced and the sinusoids are chosen to be sines and cosines equally spaced in pairs on the frequency interval 0 to a half cycle per sample (spaced by 1/N cycle per sample, omitting the sine phases at 0 and maximum frequency where they are identically zero). This particular case is known as the discrete Fourier transform, slightly rewritten in terms of real data and coefficients.

:$x = \textbf^\phi$     (DFT case for ''N'' equally spaced samples and frequencies, within a scalar factor)

The Lomb method

Trying to lower the computational burden of the Vaníček method in 1976 (no longer an issue), Lomb proposed using the above simplification in general, except for pair-wise correlations between sine and cosine bases of the same frequency, since the correlations between pairs of sinusoids are often small, at least when they are not too closely spaced. This is essentially the traditional periodogram formulation, but now adopted for use with unevenly spaced samples. The vector ''x'' is a good estimate of an underlying spectrum, but since correlations are ignored, A''x'' is no longer a good approximation to the signal, and the method is no longer a least-squares method – yet it has continued to be referred to as such.

Rather than just taking dot products of the data with sine and cosine waveforms directly, Scargle modified the standard periodogram formula to first find a time delay $\tau$ such that this pair of sinusoids would be mutually orthogonal at sample times $t_j$, and also adjusted for the potentially unequal powers of these two basis functions, to obtain a better estimate of the power at a frequency, which made his modified periodogram method exactly equivalent to Lomb's method. The time delay $\tau$ is defined by the formula

:$\tan = \frac.$

The periodogram at frequency $\omega$ is then estimated as:

:$P_x(\omega) = \frac \left( \frac + \frac \right)$

which Scargle reports then has the same statistical distribution as the periodogram in the evenly sampled case.

At any individual frequency $\omega$, this method gives the same power as does a least-squares fit to sinusoids of that frequency, of the form

:$\phi(t) = A \sin \omega t + B \cos \omega t.$

The generalized Lomb–Scargle periodogram

The standard Lomb–Scargle periodogram is valid for a model with zero mean. Commonly, this is approximated by subtracting the mean of the data before calculating the periodogram. However, this is an inaccurate assumption when the mean of the model (the fitted sinusoids) is non-zero. The ''generalized'' Lomb–Scargle periodogram removes this assumption, and explicitly solves for the mean. In this case, the function fitted is

:$\phi(t) = A \sin \omega t + B \cos \omega t + C.$

The generalized Lomb–Scargle periodogram has also been referred to as a ''floating mean periodogram''.

Korenberg's "fast orthogonal search" method

Michael Korenberg of Queen's University in Kingston, Ontario, developed a method for choosing a sparse set of components from an over-complete set, such as sinusoidal components for spectral analysis, called fast orthogonal search (FOS). Mathematically, FOS uses a slightly modified Cholesky decomposition in a mean-square error reduction (MSER) process, implemented as a sparse matrix inversion. As with the other LSSA methods, FOS avoids the major shortcoming of discrete Fourier analysis, and can achieve highly accurate identifications of embedded periodicities and excels with unequally spaced data; the fast orthogonal search method has also been applied to other problems such as nonlinear system identification.

Palmer's Chi-squared method

Palmer has developed a method for finding the best-fit function to any chosen number of harmonics, allowing more freedom to find non-sinusoidal harmonic functions.
This method is a fast technique ( FFT-based) for doing weighted least-squares analysis on arbitrarily spaced data with non-uniform standard errors. Source code that implements this technique is available.
Because data are often not sampled at uniformly spaced discrete times, this method "grids" the data by sparsely filling a time series array at the sample times. All intervening grid points receive zero statistical weight, equivalent to having infinite error bars at times between samples.

Applications

The most useful feature of the LSSA method is enabling incomplete records to be spectrally analyzed, without the need to manipulate the record or to invent otherwise non-existent data.

Magnitudes in the LSSA spectrum depict the contribution of a frequency or period to the variance of the time series. Generally, spectral magnitudes defined in the above manner enable the output's straightforward significance level regime.Beard, A.G., Williams, P.J.S., Mitchell, N.J. & Muller, H.G. A special climatology of planetary waves and tidal variability, J Atm. Solar-Ter. Phys. 63 (09), p.801–811 (2001). Alternatively, magnitudes in the Vaníček spectrum can also be expressed in dB.Pagiatakis, S. Stochastic significance of peaks in the least-squares spectrum, J of Geodesy 73, p.67-78 (1999). Note that magnitudes in the Vaníček spectrum follow β-distribution.

Inverse transformation of Vaníček's LSSA is possible, as is most easily seen by writing the forward transform as a matrix; the matrix inverse (when the matrix is not singular) or pseudo-inverse will then be an inverse transformation; the inverse will exactly match the original data if the chosen sinusoids are mutually independent at the sample points and their number is equal to the number of data points.Craymer, M.R.
''The Least Squares Spectrum, Its Inverse Transform and Autocorrelation Function: Theory and Some Applications in Geodesy''
Ph.D. Dissertation, University of Toronto, Canada (1998). No such inverse procedure is known for the periodogram method.

Implementation

The LSSA can be implemented in less than a page of MATLAB code. In essence:

"to compute the least-squares spectrum we must compute ''m'' spectral values ... which involves performing the least-squares approximation ''m'' times, each time to get he spectral powerfor a different frequency"

I.e., for each frequency in a desired set of frequencies, sine and cosine functions are evaluated at the times corresponding to the data samples, and dot products of the data vector with the sinusoid vectors are taken and appropriately normalized; following the method known as Lomb/Scargle periodogram, a time shift is calculated for each frequency to orthogonalize the sine and cosine components before the dot product, as described by Craymer; finally, a power is computed from those two amplitude components. This same process implements a discrete Fourier transform when the data are uniformly spaced in time and the frequencies chosen correspond to integer numbers of cycles over the finite data record.

This method treats each sinusoidal component independently, or out of context, even though they may not be orthogonal on the data points; it is Vaníček's original method. In contrast, as Craymer explains, it is also possible to perform a full simultaneous or in-context least-squares fit by solving a matrix equation, partitioning the total data variance between the specified sinusoid frequencies. Such a matrix least-squares solution is natively available in MATLAB as the backslash operator.

Craymer explains that the simultaneous or in-context method, as opposed to the independent or out-of-context version (as well as the periodogram version due to Lomb), cannot fit more components (sines and cosines) than there are data samples, and further that:

Lomb's periodogram method, on the other hand, can use an arbitrarily high number of, or density of, frequency components, as in a standard periodogram; that is, the frequency domain can be over-sampled by an arbitrary factor.

In Fourier analysis, such as the Fourier transform or the discrete Fourier transform, the sinusoids being fitted to the data are all mutually orthogonal, so there is no distinction between the simple out-of-context dot-product-based projection onto basis functions versus an in-context simultaneous least-squares fit; that is, no matrix inversion is required to least-squares partition the variance between orthogonal sinusoids of different frequencies. This method is usually preferred for its efficient fast Fourier transform implementation, when complete data records with equally spaced samples are available.

See also

* Non-uniform discrete Fourier transform
* Orthogonal functions
* SigSpec
* Sinusoidal model
* Spectral density
* Spectral density estimation, for competing alternatives

References

External links

LSSA package freeware download
FORTRAN, Vaníček's least-squares spectral analysis method, from the University of New Brunswick.

LSWAVE package freeware download
MATLAB, includes the Vaníček's least-squares spectral analysis method, from the U.S. National Geodetic Survey.
* tp://ftp.geod.nrcan.gc.ca/pub/GSD/craymer/software/lssa/ LSSA software freeware download(via ftp), FORTRAN, Vaníček's method, from the Natural Resources Canada.

{{Authority control

Algorithms
Analysis of variance
Applied mathematics
Applied statistics
Carl Friedrich Gauss
Computational mathematics
Computational science
Data processing
Digital signal processing
Engineering statistics
Frequency
Frequency-domain analysis
Harmonic analysis
Iterative methods
Least squares
Linear algebra
Mathematical analysis
Mathematical optimization
Mathematical physics
Mathematics of computing
Multivariate statistics
Numerical analysis
Numerical linear algebra
Optimization algorithms and methods
Sequences in time
Signal processing
Statistical forecasting
Statistical methods
Statistical signal processing
Stochastic processes
Theoretical computer science
Time series