Lippisch Delta I
   HOME

TheInfoList



OR:

The RRG Delta I was a German experimental
tailless aircraft In aeronautics, a tailless aircraft is an aircraft with no other horizontal aerodynamic surface besides its main wing. It may still have a fuselage, vertical tail fin (vertical stabilizer), and/or vertical rudder. Theoretical advantages of the ...
flown in the early 1930s first as a glider and then powered. It was one of the first
delta wing A delta wing is a wing shaped in the form of a triangle. It is named for its similarity in shape to the Greek uppercase letter delta (Δ). Although long studied, it did not find significant applications until the Jet Age, when it proved suitabl ...
aircraft.


Design and development

The first tailless aircraft that Alexander Lippisch saw was the
Weltensegler Weltensegler G.m.b.H. was a German aircraft company formed by Friedrich Wenk, who became its Technical Director.Lippisch, A.; ''The Delta Wing: History and Development'', Iowa State University 1981, pages 2-4. Wenk developed tailless gliders a ...
glider Glider may refer to: Aircraft and transport Aircraft * Glider (aircraft), heavier-than-air aircraft primarily intended for unpowered flight ** Glider (sailplane), a rigid-winged glider aircraft with an undercarriage, used in the sport of glidin ...
, which flew briefly at the second Rhön contest in 1921. He was impressed by its initial stability, though a turn led to an uncontrolled spiral dive followed by breakup and the death of its pilot. In response he built several models and also designed the full size but disappointing Espenlaub E 2. After some time designing more conventional types and becoming Technical Head of the RRG in 1925 he returned to the tailless glider layout. in 1927. He began in 1927 with the RRG Storch, which was rather like the Espenlaub and was progressively modified. All of these aircraft had wings with sweep on both
leading In typography, leading ( ) is the space between adjacent lines of type; the exact definition varies. In hand typesetting, leading is the thin strips of lead (or aluminium) that were inserted between lines of type in the composing stick to incre ...
and
trailing edge The trailing edge of an aerodynamic surface such as a wing is its rear edge, where the airflow separated by the leading edge meets.Crane, Dale: ''Dictionary of Aeronautical Terms, third edition'', page 521. Aviation Supplies & Academics, 1997. ...
s. In 1930 his first design with a straight, unswept trailing edge flew; he named it the Delta I. Its straight leading edge was swept at 20°. Following the standard practice of the time the wing had a single
spar SPAR, originally DESPAR, styled as DE SPAR, is a Dutch multinational that provides branding, supplies and support services for independently owned and operated food retail stores. It was founded in the Netherlands in 1932, by Adriaan van Well, ...
, with
plywood Plywood is a material manufactured from thin layers or "plies" of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees to one another. It is an engineered wood from the family of manufactured ...
covering ahead of it, forming a torsion resistant D-box. There were diagonal internal
strut A strut is a structural component commonly found in engineering, aeronautics, architecture and anatomy. Struts generally work by resisting longitudinal compression, but they may also serve in tension. Human anatomy Part of the functionality o ...
s close to the wing roots and further ply skin strengthened these areas. The rest of the wing was fabric covered. The thickness was decreased markedly by the upward slope of the underside, providing dihedral. The Delta's trailing edge was equally divided between outboard
ailerons An aileron (French for "little wing" or "fin") is a hinged flight control surface usually forming part of the trailing edge of each wing of a fixed-wing aircraft. Ailerons are used in pairs to control the aircraft in Flight dynamics, roll (or ...
and inboard
elevators An elevator or lift is a cable-assisted, hydraulic cylinder-assisted, or roller-track assisted machine that vertically transports people or freight between floors, levels, or decks of a building, vessel, or other structure. They are ...
. As on the Storch, the wing tips were cropped and carried small, roughly triangular, ply-covered
fin A fin is a thin component or appendage attached to a larger body or structure. Fins typically function as foils that produce lift or thrust, or provide the ability to steer or stabilize motion while traveling in water, air, or other fluids. Fin ...
s mounting longer, rounded rectangular, fabric covered
rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally aircraft, air or watercraft, water). On an aircraft the rudder is used primarily to ...
s. The inner surfaces of the fins and rudders were cambered as a conventional tail rudder would be but the outer surfaces were flat. The rudders operated independently, each with its own foot pedal. To turn to port, for example, the pilot would press only the lefthand pedal to swing its rudder outwards where it acted more like an airbrake, turning the glider to port with its drag. The fuselage of the original glider was a simple, oval-section, ply-covered nacelle. Its pilot sat in an enclosed cockpit under the wing, with a transparency in the wing edge ahead and another above. A pair of smaller windows on each side provided landing views. Landings were made on a nearly nacelle-length sprung skid. There was a second cockpit at about mid-chord with another transparency above it and a pair of windows on each side. The fuselage tapered to an angled vertical knife-edge. The addition in 1931 of a
pusher configuration In an aircraft with a pusher configuration (as opposed to a tractor configuration), the propeller(s) are mounted behind their respective engine(s). Since a pusher propeller is mounted behind the engine, the drive shaft is in compression in nor ...
, ,
horizontally opposed A flat engine is a piston engine where the cylinders are located on either side of a central crankshaft. Flat engines are also known as horizontally opposed engines, however this is distinct from the less common opposed-piston engine design, wh ...
Bristol Cherub III well above the rear of the wing with its small, metal, two-bladed propeller just beyond the trailing edge significantly altered the fuselage, though it did not lengthen it. A raised roof line continued from the engine housing forward, providing space above the wing for three windows on each side for the observer and a more conventional, framed cockpit above and forward of the wing. The lower fuselage was modified by a fixed, tricycle
undercarriage Undercarriage is the part of a moving vehicle that is underneath the main body of the vehicle. The term originally applied to this part of a horse-drawn carriage, and usage has since broadened to include: *The landing gear of an aircraft. *The ch ...
with closely spaced, trousered main legs, rubber-sprung mainwheels with low pressure tyres, a shrouded, steerable nosewheel and a little tailwheel. As a result the empty weight increased by compared with the glider. The wing remained unchanged. Sometimes known as the Lippisch Delta IM, the motorized Delta was named " Hermann Kohl" after the leader of the first East-West North Atlantic crossing.


Operational history

The glider version of the Delta I first flew in 1930 and took part in that year's Rhön contest. RRG then converted it into the powered Delta IM and Günther Groenhoff conducted its first flight in 1931. Though take-offs have been described as "difficult", Groenhoff said it was light on the controls and capable of any manoeuvres expected of conventional aircraft including a loop. Independent observers at a demonstration did not see the latter but were impressed with its manoeuvrability, its apparent reserves of power, despite the small engine, and its reluctance to stall. It flew until 1933 when it crashed heavily.


Specifications (Delta IM)


References

{{Lippisch aircraft Aircraft first flown in 1930 1930s German sailplanes Single-engined pusher aircraft Tailless delta-wing aircraft Lippisch aircraft