The Langley Research Center (LaRC or NASA Langley), located in
Hampton
Hampton may refer to:
Places Australia
*Hampton bioregion, an IBRA biogeographic region in Western Australia
*Hampton, New South Wales
*Hampton, Queensland, a town in the Toowoomba Region
* Hampton, Victoria
Canada
* Hampton, New Brunswick
*Ha ...
,
Virginia
Virginia, officially the Commonwealth of Virginia, is a state in the Mid-Atlantic and Southeastern regions of the United States, between the Atlantic Coast and the Appalachian Mountains. The geography and climate of the Commonwealth ar ...
,
United States of America
The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territo ...
, is the oldest of
NASA
The National Aeronautics and Space Administration (NASA ) is an independent agency of the US federal government responsible for the civil space program, aeronautics research, and space research.
NASA was established in 1958, succeeding t ...
's
field centers.
It directly borders
Langley Air Force Base and the
Back River on the
Chesapeake Bay
The Chesapeake Bay ( ) is the largest estuary in the United States. The Bay is located in the Mid-Atlantic (United States), Mid-Atlantic region and is primarily separated from the Atlantic Ocean by the Delmarva Peninsula (including the parts: the ...
. LaRC has focused primarily on
aeronautical research, but has also tested space hardware such as the
Apollo Lunar Module
The Apollo Lunar Module (LM ), originally designated the Lunar Excursion Module (LEM), was the lunar lander spacecraft that was flown between lunar orbit and the Moon's surface during the United States' Apollo program. It was the first crewed ...
. In addition, many of the earliest high-profile space missions were planned and designed on-site. Langley was also considered a potential site for NASA's
Manned Spacecraft Center
The Lyndon B. Johnson Space Center (JSC) is NASA's center for human spaceflight (originally named the Manned Spacecraft Center), where human spaceflight training, research, and flight control are conducted. It was renamed in honor of the late U ...
prior to the eventual selection of
Houston
Houston (; ) is the most populous city in Texas, the most populous city in the Southern United States, the fourth-most populous city in the United States, and the sixth-most populous city in North America, with a population of 2,304,580 in ...
,
Texas
Texas (, ; Spanish language, Spanish: ''Texas'', ''Tejas'') is a state in the South Central United States, South Central region of the United States. At 268,596 square miles (695,662 km2), and with more than 29.1 million residents in 2 ...
.
Established in 1917 by the
National Advisory Committee for Aeronautics
The National Advisory Committee for Aeronautics (NACA) was a United States federal agency founded on March 3, 1915, to undertake, promote, and institutionalize aeronautical research. On October 1, 1958, the agency was dissolved and its assets ...
(NACA), the research center devotes two-thirds of its programs to
aeronautics
Aeronautics is the science or art involved with the study, design, and manufacturing of air flight–capable machines, and the techniques of operating aircraft and rockets within the atmosphere. The British Royal Aeronautical Society identifies ...
and the rest to
space
Space is the boundless three-dimensional extent in which objects and events have relative position and direction. In classical physics, physical space is often conceived in three linear dimensions, although modern physicists usually consider ...
. LaRC researchers use more than 40
wind tunnel
Wind tunnels are large tubes with air blowing through them which are used to replicate the interaction between air and an object flying through the air or moving along the ground. Researchers use wind tunnels to learn more about how an aircraft ...
s to study and improve
aircraft
An aircraft is a vehicle that is able to fly by gaining support from the air. It counters the force of gravity by using either static lift or by using the dynamic lift of an airfoil, or in a few cases the downward thrust from jet engines ...
and
spacecraft
A spacecraft is a vehicle or machine designed to fly in outer space. A type of artificial satellite, spacecraft are used for a variety of purposes, including communications, Earth observation, meteorology, navigation, space colonization, p ...
safety, performance, and efficiency. Between 1958 and 1963, when NASA (the successor agency to NACA) started
Project Mercury
Project Mercury was the first human spaceflight program of the United States, running from 1958 through 1963. An early highlight of the Space Race, its goal was to put a man into Earth orbit and return him safely, ideally before the Soviet Un ...
, LaRC served as the main office of the
Space Task Group
The Space Task Group was a working group of NASA engineers created in 1958, tasked with managing America's human spaceflight programs. Headed by Robert Gilruth and based at the Langley Research Center in Hampton, Virginia, it managed Project Me ...
.
In September 2019, after previously serving as associate director and deputy director, Clayton P. Turner was appointed director of NASA Langley.
History
![Langley Research Center aircraft - EL-1996-00055](https://upload.wikimedia.org/wikipedia/commons/2/2a/Langley_Research_Center_aircraft_-_EL-1996-00055.jpeg)
After US-German relations had deteriorated from neutral to hostile around 1916, the prospect of
U.S. war entry became possible. On February 15, 1917, the newly established
Aviation Week
''Aviation Week & Space Technology'', often abbreviated ''Aviation Week'' or ''AW&ST'', is the flagship magazine of the Aviation Week Network. The weekly magazine is available in print and online, reporting on the aerospace, defense and aviatio ...
warned that the
U.S. military aviation capability was less than what was operating in the
European war. President
Woodrow Wilson
Thomas Woodrow Wilson (December 28, 1856February 3, 1924) was an American politician and academic who served as the 28th president of the United States from 1913 to 1921. A member of the Democratic Party, Wilson served as the president of ...
sent
Jerome Hunsaker
Jerome Clarke Hunsaker (August 26, 1886 – September 10, 1984) was an American naval officer and aeronautical engineer, born in Creston, Iowa, and educated at the U.S. Naval Academy and the Massachusetts Institute of Technology. His work with Gust ...
to Europe to investigate, and Hunsaker's report prompted Wilson to command the creation of the nation's first aeronautics laboratory, which became NASA Langley.
In 1917, less than three years after it was created, the
NACA
The National Advisory Committee for Aeronautics (NACA) was a United States federal agency founded on March 3, 1915, to undertake, promote, and institutionalize aeronautical research. On October 1, 1958, the agency was dissolved and its assets ...
established the Langley Memorial Aeronautical Laboratory on
Langley Field Langley may refer to:
People
* Langley (surname), a common English surname, including a list of notable people with the name
* Dawn Langley Simmons (1922–2000), English author and biographer
* Elizabeth Langley (born 1933), Canadian perform ...
. Both Langley Field and the Langley Laboratory are named for aviation pioneer
Samuel Pierpont Langley
Samuel Pierpont Langley (August 22, 1834 – February 27, 1906) was an American aviation pioneer, astronomer and physicist who Invention, invented the bolometer. He was the third secretary of the Smithsonian Institution and a professor of a ...
.
The
Aviation Section, U.S. Signal Corps
The Aviation Section, Signal Corps, was the aerial warfare service of the United States from 1914 to 1918, and a direct statutory ancestor of the United States Air Force. It absorbed and replaced the Aeronautical Division, Signal Corps, and con ...
had established a base there earlier that same year. The first research facilities were in place and aeronautical research was started by 1920. Initially, the laboratory included four researchers and 11 technicians.
![14x22 Subsonic Tunnel NASA Langley](https://upload.wikimedia.org/wikipedia/commons/b/bc/14x22_Subsonic_Tunnel_NASA_Langley.jpg)
Langley Field and NACA began parallel growth as air power proved its utility during World War I. The center was originally established to explore the field of aerodynamic research involving airframe and propulsion engine design and performance. In 1934 the world's largest wind tunnel was constructed at Langley Field with a test section; it was large enough to test full-scale aircraft. It remained the world's largest wind tunnel until the 1940s, when a tunnel was built at NASA's
Ames Research Center
The Ames Research Center (ARC), also known as NASA Ames, is a major NASA research center at Moffett Federal Airfield in California's Silicon Valley. It was founded in 1939 as the second National Advisory Committee for Aeronautics (NACA) laborat ...
in California.
The
West Area Computers
The West Computers (West Area Computing Unit, West Area Computers) were the African American, female mathematicians who worked as human computers at the Langley Research Center of NACA (predecessor of NASA) from 1943 through 1958. These women wer ...
were
African American
African Americans (also referred to as Black Americans and Afro-Americans) are an ethnic group consisting of Americans with partial or total ancestry from sub-Saharan Africa. The term "African American" generally denotes descendants of ens ...
, female
mathematician
A mathematician is someone who uses an extensive knowledge of mathematics in their work, typically to solve mathematical problems.
Mathematicians are concerned with numbers, data, quantity, structure, space, models, and change.
History
On ...
s who worked as
human computer
The term "computer", in use from the early 17th century (the first known written reference dates from 1613), meant "one who computes": a person performing mathematical calculations, before electronic computers became commercially available. Ala ...
s at the Langley Research Center from 1943 through 1958. The West Computers were originally subject to Virginia's
Jim Crow laws
The Jim Crow laws were state and local laws enforcing racial segregation in the Southern United States. Other areas of the United States were affected by formal and informal policies of segregation as well, but many states outside the Sout ...
and got their name because they worked at Langley's West Area, while the white mathematicians worked in the East section.
Early in 1945, the center expanded to include rocket research, leading to the establishment of
a flight station at
Wallops Island, Virginia. A further expansion of the research program permitted Langley Research Center to orbit payloads, starting with NASA's
Explorer 9 balloon satellite
A balloon satellite is inflated with gas after it has been put into orbit. It is also occasionally referred to as a "satelloon", which is a trademarked name owned by Gilmore Schjeldahl's G.T. Schjeldahl Company.
List of balloon satellites
abb ...
in mid-February 1961. As rocket research grew, aeronautics research continued to expand and played an important part when the subsonic flight was advanced and supersonic and hypersonic flight were introduced.
Langley Research Center can claim many historic firsts, some of which have proven to be revolutionary scientific breakthroughs. These accomplishments include: Development of the concept of research aircraft leading to supersonic flight, the world's first transonic wind tunnel, training the first crews of astronauts, the
Lunar Landing
A Moon landing is the arrival of a spacecraft on the surface of the Moon. This includes both crewed and robotic missions. The first human-made object to touch the Moon was the Soviet Union's Luna 2, on 13 September 1959.
The United S ...
Facility which provides the simulation of lunar gravity, and the Viking program for Mars exploration. The center also developed standards for the grooving of aircraft runways based on a previous British design used at
Washington National Airport
Ronald Reagan Washington National Airport , sometimes referred to colloquially as National Airport, Washington National, Reagan National Airport, DCA, Reagan, or simply National, is an international airport in Arlington County, Virginia, across ...
.
Grooved runways reduce
aquaplaning
Aquaplaning or hydroplaning by the tires of a road vehicle, aircraft or other wheeled vehicle occurs when a layer of water builds between the wheels of the vehicle and the road surface, leading to a loss of traction that prevents the vehicle fr ...
which permits better grip by aircraft tires in heavy rain. This grooving is now the international standard for all runways around the world.
Langley was also a contender for the site of NASA Mission Control, prior to the eventual selection of Houston, due to Langley's prominence with NASA at the time, the large existing aerospace industry already present in the Hampton Roads region, and the proximity to Washington, D.C. The selection of Houston actually took many higher-ups at Langley by surprise and caused some lingering controversy in the surrounding area over the loss and transfer of so many jobs to Houston. Though they had lost out on the Manned Spacecraft Center, Langley still played an important role in conducting research and training during the Apollo Program.
Aeronautics
![Wind tunnel x-43](https://upload.wikimedia.org/wikipedia/commons/a/a7/Wind_tunnel_x-43.jpg)
Langley Research Center performs critical research on aeronautics, including
wake vortex
In fluid dynamics, a vortex ( : vortices or vortexes) is a region in a fluid in which the flow revolves around an axis line, which may be straight or curved. Vortices form in stirred fluids, and may be observed in smoke rings, whirlpools in th ...
behavior,
fixed-wing aircraft
A fixed-wing aircraft is a heavier-than-air flying machine, such as an airplane, which is capable of flight using wings that generate lift caused by the aircraft's forward airspeed and the shape of the wings. Fixed-wing aircraft are distinc ...
,
rotary wing aircraft
A rotorcraft or rotary-wing aircraft is a heavier-than-air aircraft with rotary wings or rotor blades, which generate lift by rotating around a vertical mast. Several rotor blades mounted on a single mast are referred to as a rotor. The Internati ...
,
aviation safety
Aviation safety is the study and practice of managing risks in aviation. This includes preventing aviation accidents and incidents through research, educating air travel personnel, passengers and the general public, as well as the design of airc ...
,
human factors
Human factors and ergonomics (commonly referred to as human factors) is the application of psychological and physiological principles to the engineering and design of products, processes, and systems. Four primary goals of human factors learnin ...
and
aerospace engineering
Aerospace engineering is the primary field of engineering concerned with the development of aircraft and spacecraft. It has two major and overlapping branches: aeronautical engineering and astronautical engineering. Avionics engineering is si ...
. LaRC supported the design and testing of the
hypersonic
In aerodynamics, a hypersonic speed is one that exceeds 5 times the speed of sound, often stated as starting at speeds of Mach 5 and above.
The precise Mach number at which a craft can be said to be flying at hypersonic speed varies, since in ...
X-43, which achieved a
world speed record of . LaRC assisted the NTSB in the investigation of the crash of
American Airlines Flight 587
American Airlines Flight 587 was a regularly scheduled international passenger flight from John F. Kennedy International Airport to Las Américas International Airport in Santo Domingo, the capital of the Dominican Republic. On November 12, 200 ...
.
Work began in July 2011 to remove the 1940s era transonic wind tunnel. The facility supported development and propulsion integration research for many military aircraft including all fighters since 1960 (
F-14
The Grumman F-14 Tomcat is an American carrier-capable supersonic, twin-engine, two-seat, twin-tail, variable-sweep wing fighter aircraft. The Tomcat was developed for the United States Navy's Naval Fighter Experimental (VFX) program after the ...
,
F-15
The McDonnell Douglas F-15 Eagle is an American twin-engine, all-weather tactical fighter aircraft designed by McDonnell Douglas (now part of Boeing). Following reviews of proposals, the United States Air Force selected McDonnell Douglas's ...
,
F-16
The General Dynamics F-16 Fighting Falcon is a single-engine Multirole combat aircraft, multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). Designed as an air superiority day fighter, it ...
,
F-18
The McDonnell Douglas F/A-18 Hornet is an all-weather, twin-engine, supersonic, carrier-capable, multirole combat aircraft, designed as both a fighter and attack aircraft (hence the F/A designation). Designed by McDonnell Douglas (now part ...
and the
Joint Strike Fighter
Joint Strike Fighter (JSF) is a development and acquisition program intended to replace a wide range of existing fighter, strike, and ground attack aircraft for the United States, the United Kingdom, Italy, Canada, Australia, the Netherlands ...
) but had been inactive since 2004. Langley retained transonic wind tunnel testing capabilities facilities in the
National Transonic Facility
The National Transonic Facility (NTF), also known internally as facility 1236, is a high-pressure, cryogenic, closed-circuit wind tunnel at the Langley Research Center in Hampton, Virginia. It uses nitrogen gas, at high pressure, to cool the ai ...
, a high pressure, cryogenically cooled closed loop wind tunnel.
Fabrication research and development
Electron-beam freeform fabrication (EBF³)
Electron-beam freeform fabrication
Electron-beam freeform fabrication (EBF3) is an additive manufacturing process that builds near-net-shape parts. It requires far less raw material and finish machining than traditional manufacturing methods. EBF3 is done in a vacuum chamber wh ...
(EBF
3) is an additive manufacturing process that builds
near-net-shape parts. Additive manufacturing encompasses processes in which parts are built by successively adding material rather than by cutting or grinding it away as in conventional machining, similar to 3d printing. In the 1990s, development was primarily done by Karen Taminger, a material research engineer at NASA LaRC. Since 2000, a team of researchers at the NASA LaRC have led the fundamental research and development of this technique for additive manufacturing for metallic aerospace structures.
Benefits of the
EBF³ process include increased strength and reduced material usage. The technique has the ability to build functionally graded unitized parts directly from
CAD
Computer-aided design (CAD) is the use of computers (or ) to aid in the creation, modification, analysis, or optimization of a design. This software is used to increase the productivity of the designer, improve the quality of design, improve co ...
. Recently, LaRC has become home to this type of machining process, which is used by their room-sized High Frequency ,
X-ray
An X-ray, or, much less commonly, X-radiation, is a penetrating form of high-energy electromagnetic radiation. Most X-rays have a wavelength ranging from 10 picometers to 10 nanometers, corresponding to frequencies in the range 30&nb ...
emitting
electron
The electron ( or ) is a subatomic particle with a negative one elementary electric charge. Electrons belong to the first generation of the lepton particle family,
and are generally thought to be elementary particles because they have no kn ...
gun (similar to
Cathode Ray Tube
A cathode-ray tube (CRT) is a vacuum tube containing one or more electron guns, which emit electron beams that are manipulated to display images on a phosphorescent screen. The images may represent electrical waveforms ( oscilloscope), pictu ...
s). This quickly melts either
aluminum
Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It has ...
or
titanium
Titanium is a chemical element with the symbol Ti and atomic number 22. Found in nature only as an oxide, it can be reduced to produce a lustrous transition metal with a silver color, low density, and high strength, resistant to corrosion in ...
wire (positioned by dual independent wire feeders) into the desired 3-dimensional metallic parts with a material strength comparable to that of wrought products. Metallic parts are also built directly from
CAD
Computer-aided design (CAD) is the use of computers (or ) to aid in the creation, modification, analysis, or optimization of a design. This software is used to increase the productivity of the designer, improve the quality of design, improve co ...
without molds or tools, leaving the end product with very low
porosity
Porosity or void fraction is a measure of the void (i.e. "empty") spaces in a material, and is a fraction of the volume of voids over the total volume, between 0 and 1, or as a percentage between 0% and 100%. Strictly speaking, some tests measure ...
.
Plastic fabrication
LaRC also houses a large collection of various inexpensive plastic reformation machines. These machines are used in the
freeform fabrication department for faster timing, better precision, and larger quantities of low-cost toy,
model
A model is an informative representation of an object, person or system. The term originally denoted the plans of a building in late 16th-century English, and derived via French and Italian ultimately from Latin ''modulus'', a measure.
Models c ...
, and industrial plastic parts. The fabrication of plastic parts is similar to the EBF³ process, but with a thin, grated
heating element
A heating element converts electrical energy into heat through the process of Joule heating. Electric current through the element encounters resistance, resulting in heating of the element. Unlike the Peltier effect, this process is independe ...
as its melting apparatus. Both are run by CAD data and deal with various freeform fabrication of raw materials.
Astronautics
Moon
![Nasa langley test gantry](https://upload.wikimedia.org/wikipedia/commons/5/50/Nasa_langley_test_gantry.jpg)
Since the start of
Project Gemini
Project Gemini () was NASA's second human spaceflight program. Conducted between projects Mercury and Apollo, Gemini started in 1961 and concluded in 1966. The Gemini spacecraft carried a two-astronaut crew. Ten Gemini crews and 16 individual ...
, Langley was a center for training of
rendezvous in space. In 1965, Langley opened the
Lunar Landing Research Facility
The Lunar Landing Research Facility was an area at NASA's Langley Research Center in Hampton, Virginia that was used to simulate Apollo Moon landings with a mock Lunar Module powered by a small rocket motor suspended from a crane over a simulat ...
for simulations of Moon landings with a mock
Apollo Lunar Module
The Apollo Lunar Module (LM ), originally designated the Lunar Excursion Module (LEM), was the lunar lander spacecraft that was flown between lunar orbit and the Moon's surface during the United States' Apollo program. It was the first crewed ...
suspended from a gantry over a simulated lunar landscape. There was experimental work on some
Lunar Landing Research Vehicle
The Bell Aerosystems Lunar Landing Research Vehicle (LLRV, nicknamed the Flying Bedstead) was a Project Apollo era program to build a simulator for the Moon landings. The LLRVs were used by the FRC, now known as the NASA Armstrong Flight Resear ...
s (LLRV).
Mars
Langley Research Center supported NASA's mission with the designing of a spacecraft for a landing on Mars. (see the
Mars Exploration Rover
NASA's Mars Exploration Rover (MER) mission was a robotic space mission involving two Mars rovers, ''Spirit (rover), Spirit'' and ''Opportunity (rover), Opportunity'', exploring the planet Mars. It began in 2003 with the launch of the two rover ...
.)
Earth science
Langley Research Center conducts
Earth science
Earth science or geoscience includes all fields of natural science related to the planet Earth. This is a branch of science dealing with the physical, chemical, and biological complex constitutions and synergistic linkages of Earth's four spheres ...
research to support NASA's mission.
Awards
LRC scientists and engineers have won the
Collier Trophy
The Robert J. Collier Trophy is an annual aviation award administered by the U.S. National Aeronautic Association (NAA), presented to those who have made "the greatest achievement in aeronautics or astronautics in America, with respect to im ...
5 times, listed below.
* 1929: for the development of low-drag cowling for radial air-cooled aircraft engines.
* 1946: to
Lewis A. Rodert,
Lawrence D. Bell and
Chuck Yeager
Brigadier General Charles Elwood Yeager ( , February 13, 1923December 7, 2020) was a United States Air Force officer, flying ace, and record-setting test pilot who in October 1947 became the first pilot in history confirmed to have exceeded the ...
for the development of an efficient wing deicing system.
* 1947: to
John Stack of the then Langley Memorial Aeronautical Laboratory for research to determine the physical laws affecting supersonic flight. Lawrence D. Bell and Chuck Yeager also shared in this trophy for their work on supersonic flight.
* 1951: to John Stack for the development and use of the slotted-throat wind tunnel.
* 1954: to
Richard T. Whitcomb for the development of the
Whitcomb area rule
The Whitcomb area rule, named after NACA engineer Richard Whitcomb and also called the transonic area rule, is a design procedure used to reduce an aircraft's drag at transonic speeds which occur between about Mach 0.75 and 1.2. For supersonic ...
, according to the citation, a "powerful, simple, and useful method of reducing greatly the sharp increase in wing drag heretofore associated with transonic flight, and which constituted a major factor requiring great reserves of power to attain supersonic speeds."
See also
*
Aerospace engineering
Aerospace engineering is the primary field of engineering concerned with the development of aircraft and spacecraft. It has two major and overlapping branches: aeronautical engineering and astronautical engineering. Avionics engineering is si ...
*
NASA field centers and other facilities
*
TsAGI
The Central Aerohydrodynamic Institute (also (Zhukovsky) Central Institute of Aerodynamics, russian: Центра́льный аэрогидродинами́ческий институ́т, ЦАГИ, Tsentral'nyy Aerogidrodinamicheskiy Institut, ...
Russia's equivalent test center and research institute
References
External links
Langley Research Center websiteLangley Archives Collectionat Cultural Resources Geographical Information Systems (CRGIS), NASA
*
ttps://history.nasa.gov/SP-4316.pdf ''Crafting Flight: Aircraft Pioneers and the Contributions of the Men and Women of NASA Langley Research Center'' (NASA SP-2003-4316)''Engineer in Charge: A History of the Langley Aeronautical Laboratory,1917–1958'' (NASA SP-4305, 1987)*
Historic American Engineering Record
Heritage Documentation Programs (HDP) is a division of the U.S. National Park Service (NPS) responsible for administering the Historic American Buildings Survey (HABS), Historic American Engineering Record (HAER), and Historic American Landscapes ...
documentation (all located in Hampton, Independent City, VA):
**
**
**
**
**
**
**
{{coord, 37.0925, -76.3825, type:landmark_region:US-VA, display=title
Aerospace research institutes
Aviation research institutes
Buildings and structures in Hampton, Virginia
Historic American Engineering Record in Virginia
National Register of Historic Places in Hampton, Virginia
Space technology research institutes
Superfund sites in Virginia
1917 establishments in Virginia
NASA research centers