Katanpää-class Mine Countermeasure Vessel

''Katanpää''-class mine countermeasure vessels are a class of three multipurpose mine countermeasure vessels (MCMV) ordered by the Finnish Navy. The nearly 250 million euro contract was awarded to the Italian shipyard Intermarine S.p.A. in 2006. Initially, all three vessels were scheduled to be delivered by 2014 and the class was expected to achieve operational readiness by 2015, but there have been various delays and the last vessel was handed over to the Finnish Navy in November 2016.

The ''Katanpää'' class is expected to remain in service until 2040–2042.

Development and construction

In its safety and defence policy report of 2004 the Finnish Government announced that, in addition to training mobile coastal troops and protecting sea traffic, the Finnish Navy would start focusing on developing its mine countermeasure capabilities. As a result a decision was made to retire the aging s and invest in a new mine countermeasure fleet, which would include minehunters and -sweepers, divers and a new mine warfare information system.Suomen turvallisuus- ja puolustuspolitiikka 2004
Valtioneuvoston selonteko VNS 6/2004. Valtioneuvoston kanslian julkaisusarja 16/2004. .

A request for bids was published on 5 June 2004 and by 3 January 2005 the Finnish Navy had received offers from seven shipyards, both domestic and foreign. After an extensive evaluation it was decided to continue negotiations with Intermarine S.p.A. of Italy. Kockums AB of Sweden and Navantia SA from Spain. Aker Finnyards Oy (Finland), Armaris SA (France), Lürssen Werft GmbH and Abeking & Rasmussen GmbH (both German) were left out.Puolustusministeri Kääriäinen päätti merivoimien miinantorjunta-hankkeesta
Puolustusministeriön tiedote 01.11.2005. In November 2006 the contract for three mine countermeasure vessels was awarded to the Italian shipyard Intermarine S.P.A.Merivoimat tilaa miinantorjunta-alukset Italiasta
Helsingin Sanomat 2006-11-17. The total order worth was 244.8 million euros and it will include a spare parts package.Miinantorjunta-alus varmentaa meriyhteydet
Ruotuväki 17/2010. About 50% of the total cost is contracted for Finnish companies and the shipbuilding contract includes a 100% offset agreement.Miinantorjunta-alus Katanpää on täynnä hienoa tietotekniikkaa. Laiva 3/2012.

The construction of the first vessel began in July 2007 with the ceremony of "start of lamination" which, for vessels built of composite materials, equals to the steel cutting ceremony. The construction of the second vessel was started in March 2008 and the third vessel in February 2009. The construction of the vessels was delayed by one year after the shipyard was devastated by a flood in early 2009. Two more floods occurred in late 2009, but the damage was not as extensive.Suomalaisten miinantorjuntalaiva juuttui tulvaan
YLE 25.04.2010.

The lead vessel of the class, ''Katanpää'', began its sea trials in March 2011, but due to additional delays it was not delivered until 4 May 2012. The vessel was shipped to Finland onboard heavy lift vessel which left Italy on 21 May.Sotalaiva sai kansipaikan. Helsingin Sanomat, 25 May 2012. ''Katanpää'' was presented to the public in Helsinki on 9 July 2012, the 94th anniversary of the Finnish Navy. The second vessel, ''Purunpää'', was delivered to the Finnish Navy on 20 August 2013 and arrived in Turku onboard one month later. The third vessel, initially expected by 2015, was handed over to the Finnish Navy in November 2016 and will arrive in Finland in December.

The ''Katanpää''-class mine countermeasure vessels are expected to remain in service until 2040-2042.

Naming

The ''Katanpää''-class mine countermeasure vessels were initially referred to as the MCMV 2010 class after the mine countermeasure development project and "MITO class" after the Finnish word for mine countermeasures, ''miinantorjunta''. As naval vessel classes of the Finnish Navy are traditionally named after the lead ship of the class, the new class of mine countermeasure vessels received its final name when the first vessel was named ''Katanpää'' (pennant number 40) on 16 June 2009.Ensimmäinen miinantorjunta-alus kastettiin "Katanpääksi". Puolustusvoimien tiedote, 22.9.2009. The second vessel of the ''Katanpää'' class received its name, ''Purunpää'' (41), on 26 September 2010 and the third one was named ''Vahterpää'' (42) on 3 November 2011.Uusi miinantorjunta-alus kastettiin "Purunpääksi"
Merivoimien Esikunta. Third Katanpää class named in Italy
Merivoimien Esikunta, 4 November 2011.

The vessels have been named after historical locations, Katanpää being an old island fortress and naval port outside Kustavi in Western Finland, Purunpää an old harbor site in Dragsfjärd and Vahterpää an old naval base outside Loviisa in the Gulf of Finland. The same names were also carried by three of the four BYMS class minesweepers operated by the Finnish Navy in the 1950s. For the new class of vessels, the Finnish Navy has adopted a new prefix "MHC" which stands for "Mine Hunter Coastal".

Technical details

The ''Katanpää''-class mine countermeasure vessels are constructed of laminated composite materials. They are long and have a beam of and a draft of . The hull, decks and bulkheads are made of fiberglass, which in places are up to thick. The decks are additionally reinforced with balsa and carbon fiber. This improves shock resistance against underwater explosions and reduces the vessels' magnetic, noise and pressure signatures that could detonate the mines. The low-signature diesel-electric propulsion system consists of two MTU 8V-396-TE74 high-speed diesel engines, each producing , and two Voith Schneider propellers. The ''Katanpää''-class vessels are designed to operate in archipelagoes, coastal regions and open seas, and are capable of operating in ice.New mine vessel for Finnish Navy
Baird Maritime, 7 September 2013. They will have a service speed of and a maximum range of .MCMV 2010
Ministry of Defence.

The ''Katanpää''-class vessels will be equipped with an extensive array of equipment to search for, locate and destroy naval mines, ranging from two autonomous underwater vehicles (AUV) and two remotely operated vehicles (ROV) to hull-mounted sensors. The larger AUV, HUGIN (High Precision Untethered Geosurvey and Inspection system), which is manufactured by Kongsberg Maritime, is over four meters long and weighs over . It is equipped with a multibeam echosounder (MBES), a smaller version of the one mounted on the hull of the vessel. This instrument is used to collect topographic information of the seabed and a synthetic aperture side-scanning sonar can be used to detect and classify targets. The smaller AUV, REMUS 100 (Remote Environmental Monitoring Unit), weighs only and can be used to collect information of the sea floor with its side-scanning sonar at depths of up to 100 metres. Two ROVs, a Double Eagle by Saab Underwater Systems of Sweden and SeaFox I by Atlas Elektronik of Germany, can be used to identify and destroy naval mines. The hull-mounted sensors include a Kongsberg EM-710 RD multibeam echosounder and a TOPAS (Topographic Parametric Sonar) sediment echosounder with jets that can penetrate the uppermost strata of the seabed. In addition the vessels will be equipped with American-made Klein Associates Klein 5500 towed side-scanning sonars. Underwater positioning is provided with Kongsberg HiPAP 500 (High Precision Acoustic Positioning) system. The vessels follow a toolbox principle in which a suitable combination of sensors and equipment is selected individually for each mission according to the task and environmental conditions.Katanpää-luokan miinantorjuntajärjestelmällä teknistä suorituskykyä
Rannikon Puolustaja 4/09

Each vessel of the ''Katanpää'' class is equipped with a Bofors 40 mm L/70 gun for self-defence. The fire control is provided by Atlas Elektronik and the integrated system utilizes EOTS TV/IR multisensors. The system can be controlled from either one of five consoles in the combat information center or from the bridge, although only one console is equipped with the pedals required to control the gun. In addition the vessels are armed with depth charges.

References

External links

Katanpää class on builder's official website

{{DEFAULTSORT:Katanpaa class mine countermeasure vessel
Ships of the Finnish Navy
Minesweepers of the Finnish Navy
Mine warfare vessel classes
Ships built in Italy