Hunter 140
   HOME

TheInfoList



OR:

The Hunter 140 is an American
dinghy A dinghy is a type of small boat, often carried or towed by a larger vessel for use as a tender. Utility dinghies are usually rowboats or have an outboard motor. Some are rigged for sailing but they differ from sailing dinghies, which ...
that was designed by the
Hunter Design Team Hunter Marine is an American boat builder, now known as Marlow-Hunter, LLC, owned by David E. Marlow. The company also produces the Mainship powerboat brand. Marlow also owns and manufactures the Marlow Yachts brand consisting of long rang ...
as a sailing trainer and first built in 2003.


Production

The design was built by
Hunter Marine Hunter Marine is an American boat builder, now known as Marlow-Hunter, LLC, owned by David E. Marlow. The company also produces the Mainship powerboat brand. Marlow also owns and manufactures the Marlow Yachts brand consisting of long rang ...
in the
United States The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territorie ...
starting in 2003, but it is now out of production.


Design

The Hunter 140 is an unsinkable
sailing dinghy Dinghy sailing is the activity of sailing small boats by using five essential controls: * the sails * the foils (i.e. the daggerboard or centreboard and rudder and sometimes lifting foils as found on the Moth) * the trim (forward/rear angle of ...
, built of ACP, thermoformed and UV protected plastic, with a fiberglass mat and injected foam construction, making it unsinkable. It has a fractional
sloop A sloop is a sailboat with a single mast typically having only one headsail in front of the mast and one mainsail aft of (behind) the mast. Such an arrangement is called a fore-and-aft rig, and can be rigged as a Bermuda rig with triangular sa ...
rig, an
aluminum Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It has ...
mast and boom with
stainless steel Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel's corros ...
standing rigging, a
raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...
, a vertical
transom Transom may refer to: * Transom (architecture), a bar of wood or stone across the top of a door or window, or the window above such a bar * Transom (nautical), that part of the stern of a vessel where the two sides of its hull meet * Operation Tran ...
, a transom-hung
rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally aircraft, air or watercraft, water). On an aircraft the rudder is used primarily to ...
controlled by a
tiller A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post or stock to provide leverage in the form of torque for the helmsman to turn the rudder. ...
and a retractable
centerboard A centreboard or centerboard (US) is a retractable hull appendage which pivots out of a slot in the hull of a sailboat, known as a ''centreboard trunk'' (UK) or ''centerboard case'' (US). The retractability allows the centreboard to be raised t ...
. It displaces and can accommodate three occupants. The boat has a draft of with the centreboard extended and with it retracted, allowing beaching or ground transportation on a trailer. Factory options included a
roller furling Roller furling is a method of furling (i.e. reefing) a yacht's staysail by rolling the sail around a stay. Roller furling is typically used for foresails such as jibs or genoas. A mainsail may also be furled by a similar system, whereby the sai ...
jib, a launching dolly, a road trailer, a motor mount and a
outboard motor An outboard motor is a propulsion system for boats, consisting of a self-contained unit that includes engine, gearbox and propeller or jet drive, designed to be affixed to the outside of the transom. They are the most common motorised method ...
for docking and maneuvering.


See also

*
List of sailing boat types The following is a partial list of sailboat types and sailing classes, including keelboats, dinghies and multihull ( catamarans and trimarans). Olympic classes World Sailing Classes Historically known as the IYRU (International Yacht Racing ...
Related design *
Hunter 146 The Hunter 146 is an American sailing dinghy that was designed by Chuck Burns and the Hunter Design Team as a novice sailboat and first built in 2003. The design was renamed the Hunter 15 in 2008 and is now referred to as the Marlow-Hunter 15. ...
Similar sailboats *
Laser 2 The Laser 2, or Laser II, is a sailboat that was designed by New Zealander Frank Bethwaite and Canadian Ian Bruce as a one-design racer and first built in 1978. Production The design was built by Bruce's company, Performance Sailcraft, in ...


References

{{Hunter Marine Dinghies 2000s sailboat type designs Sailboat types built by Hunter Marine Sailboat type designs by Hunter Design Team