Howard R. Johnson (inventor)

The history of perpetual motion machines dates at least back to the Middle Ages. For millennia, it was not clear whether perpetual motion devices were possible or not, but modern theories of thermodynamics have shown that they are impossible. Despite this, many attempts have been made to construct such machines, continuing into modern times. Modern designers and proponents sometimes use other terms, such as "overunity", to describe their inventions.

History

Pre-19th century

There are some unsourced claims that a perpetual motion machine called the "magic wheel" (a wheel spinning on its axle powered by lodestones) appeared in 8th-century Bavaria. This historical claim appears to be unsubstantiated though often repeated.

Early designs of perpetual motion machines were done by Indian mathematician–astronomer Bhaskara II, who described a wheel (Bhāskara's wheel) that he claimed would run forever.Lynn Townsend White, Jr. (April 1960). "Tibet, India, and Malaya as Sources of Western Medieval Technology", ''The American Historical Review'' 65 (3), p. 522-526.

A drawing of a perpetual motion machine appeared in the sketchbook of Villard de Honnecourt, a 13th-century French master mason and architect. The sketchbook was concerned with mechanics and architecture. Following the example of Villard, Peter of Maricourt designed a magnetic globe which, if it were mounted without friction parallel to the celestial axis, would rotate once a day. It was intended to serve as an automatic armillary sphere.

Leonardo da Vinci made a number of drawings of devices he hoped would make free energy. Leonardo da Vinci was generally against such devices, but drew and examined numerous overbalanced wheels.

Mark Anthony Zimara, a 16th-century Italian scholar, proposed a self-blowing windmill.

Various scholars in this period investigated the topic. In 1607 Cornelius Drebbel in "Wonder-vondt van de eeuwighe bewegingh" dedicated a Perpetuum motion machine to James I of England. It was described by Heinrich Hiesserle von Chodaw in 1621. Robert Boyle devised the "perpetual vase" ("perpetual goblet" or "hydrostatic paradox") which was discussed by Denis Papin in the ''Philosophical Transactions'' for 1685. Johann Bernoulli proposed a fluid energy machine. In 1686, Georg Andreas Böckler, designed a "self operating" self-powered water mill and several perpetual motion machines using balls using variants of Archimedes' screws. In 1712, Johann Bessler ( Orffyreus), claimed to have experimented with 300 different perpetual motion models before developing what he said were working models.

In the 1760s, James Cox and John Joseph Merlin developed Cox's timepiece. Cox claimed that the timepiece was a true perpetual motion machine, but as the device is powered by changes in atmospheric pressure via a mercury barometer, this is not the case.

In 1775, the Royal Academy of Sciences in Paris made the statement that the Academy "will no longer accept or deal with proposals concerning perpetual motion."

Industrial Revolution

19th century

In 1812, Charles Redheffer, in Philadelphia, claimed to have developed a "generator" that could power other machines. The machine was open for viewing in Philadelphia, where Redheffer raised large amount of money from the admission fee. Redheffer moved his machine to New York, after his cover was blown in Philadelphia, while applying for government funding. It was there that Robert Fulton exposed Redheffer's schemes during an exposition of the device in New York City (1813). Removing some concealing wooden strips, Fulton found a catgut belt drive went through a wall to an attic. In the attic, a man was turning a crank to power the device.

In 1827, Sir William Congreve, 2nd Baronet devised a machine running on capillary action that would disobey the principle that water seeks its own level, so to produce a continuous ascent and overflow. The device had an inclined plane over pulleys. At the top and bottom, there travelled an endless band of sponge, a bed and, over this, again an endless band of heavy weights jointed together. The whole stood over the surface of still water. Congreve believed his system would operate continuously.

In 1868, an Austrian, Alois Drasch, received a US patent for a machine that possessed a "thrust key-type gearing" of a rotary engine. The vehicle driver could tilt a trough depending upon need. A heavy ball rolled in a cylindrical trough downward, and, with continuous adjustment of the device's levers and power output, Drasch believed that it would be possible to power a vehicle.

In 1870, E.P. Willis of New Haven, Connecticut made money from a "proprietary" perpetual motion machine. A story of the overcomplicated device with a hidden source of energy appears in the ''Scientific American'' article "The Greatest Discovery Ever Yet Made". Investigation into the device eventually found a source of power that drove it.

John Ernst Worrell Keely claimed the invention of an induction resonance motion motor. He explained that he used "etheric technology". In 1872, Keely announced that he had discovered a principle for power production based on the vibrations of tuning forks. Scientists investigated his machine which appeared to run on water, though Keely endeavoured to avoid this. Shortly after 1872, venture capitalists accused Keely of fraud (they lost nearly five million dollars). Keely's machine, it was discovered after his death, was based on hidden air pressure tubes.

1900 to 1950

In 1900, Nikola Tesla