![Ventilation unit with heat pump and ground - cooling](https://upload.wikimedia.org/wikipedia/commons/4/42/Ventilation_unit_with_heat_pump_and_ground_-_cooling.png)
Heat recovery ventilation (HRV), also known as mechanical ventilation heat recovery (MVHR), is an
energy recovery
Energy recovery includes any technique or method of minimizing the input of energy to an overall system by the exchange of energy from one sub-system of the overall system with another. The energy can be in any form in either subsystem, but mos ...
ventilation
Ventilation may refer to:
* Ventilation (physiology), the movement of air between the environment and the lungs via inhalation and exhalation
** Mechanical ventilation, in medicine, using artificial methods to assist breathing
*** Ventilator, a m ...
system which works between two air sources at different temperatures. Heat recovery is a method which is used to reduce the heating and cooling demands of buildings. By recovering the residual heat in the exhaust gas, the fresh air introduced into the air conditioning system is preheated (pre-cooled) and the fresh air
enthalpy
Enthalpy , a property of a thermodynamic system, is the sum of the system's internal energy and the product of its pressure and volume. It is a state function used in many measurements in chemical, biological, and physical systems at a constant ...
is increased (reduced) before the fresh air enters the room or the air cooler of the air conditioning unit performs heat and moisture treatment. A typical heat recovery system in buildings consists of a core unit, channels for fresh and exhaust air, and blower fans. Building exhaust air is used as either a heat source or heat sink depending on the climate conditions, time of year and requirements of the building. Heat recovery systems typically recover about 60–95% of the heat in exhaust air and have significantly improved the
energy efficiency
Energy efficiency may refer to:
* Energy efficiency (physics), the ratio between the useful output and input of an energy conversion process
** Electrical efficiency, useful power output per electrical power consumed
** Mechanical efficiency, a ra ...
of buildings.
Working principle
A heat recovery system is designed to supply conditioned air to the occupied space to maintain a certain temperature. A heat recovery system keeps a house fully ventilated while recovering heat being emitted from the inside environment. The purpose of heat recovery systems is to transfer the
thermal energy
The term "thermal energy" is used loosely in various contexts in physics and engineering. It can refer to several different well-defined physical concepts. These include the internal energy or enthalpy of a body of matter and radiation; heat, d ...
from one fluid to another fluid, from one fluid to a solid, or from a solid surface to a fluid at different temperatures and in thermal contact. There is no direct interaction between fluid and fluid or fluid and solid in most heat recovery systems. In some heat recovery systems fluid leakage is observed due to pressure differences between fluids, resulting in a mixture of the two fluids.
Types
Rotary thermal wheels
Rotary thermal wheels are a mechanical means of heat recovery. A rotating porous metallic wheel transfers thermal energy from one air stream to another by passing through each fluid alternately. The system operates by working as a thermal storage mass whereby the heat from the air is temporarily stored within the wheel matrix until it is transferred to the cooler air stream.
Two types of rotary thermal wheel exist: heat wheels and enthalpy (
desiccant) wheels. Though there is geometrical similarity between heat and enthalpy wheels, there are differences that affect the operation of each design. In a system utilizing a desiccant wheel, the moisture in the air stream with the highest relative humidity is transferred to the opposite air stream after flowing through the wheel. This can work in both directions of incoming air to exhaust air and exhaust air to incoming air. The supply air can then be used directly or employed to further cool the air. This is an energy intensive process.
Fixed plate heat exchangers
Fixed plate
heat exchangers
A heat exchanger is a system used to transfer heat between a source and a working fluid. Heat exchangers are used in both cooling and heating processes. The fluids may be separated by a solid wall to prevent mixing or they may be in direct conta ...
are the most commonly used type of heat exchanger and have been developed for 40 years. Thin metal plates are stacked with a small spacing between plates. Two different air streams pass through these spaces, adjacent to each other. The heat transfer occurs as the temperature transfers through the plate from one air stream to the other. The efficiency of these devices have shown values of 90% sensible heat efficiency in transferring sensible heat from one air stream to another. The high levels of efficiency are attributed to the high heat transfer coefficients of the materials used, operational pressure and temperature range.
Heat pipes
Heat pipe
A heat pipe is a heat-transfer device that employs phase transition to transfer heat between two solid interfaces.
At the hot interface of a heat pipe, a volatile liquid in contact with a thermally conductive solid surface turns into a vapor ...
s are a heat recovery device that use a multi-phase process to transfer heat from one air stream to another.
Heat is transferred using an evaporator and condenser within a wicked, sealed pipe containing a fluid which undergoes constant phase change to transfer heat. The fluid within the pipes changes from a fluid to a gas in the evaporator section, absorbing the thermal energy from the warm air stream. The gas condenses back to a fluid in the condenser section where the thermal energy is dissipated into the cooler air stream raising the temperature. The fluid/gas is transported from one side of the heat pipe to the other through pressure, wick forces or gravity, depending on the arrangement of the heat pipe.
Run-around
Run-around systems are a hybrid heat recovery system that incorporates characteristics from other heat recovery technology to form a single device, capable of recovering heat from one air stream and delivering to another a significant distance away. There is the general case of run-around heat recovery, two fixed plate heat exchangers are located in two separate airstreams and are linked by a closed loop containing a fluid which is continually pumped between the two heat exchangers. The fluid is heated and cooled constantly as it flows around the loop, providing the heat recovery. The constant flow of the fluid through the loop requires pumps to move between the two heat exchangers. Though this is an additional energy demand, using pumps to circulate fluid is less energy intensive than fans to circulate air.
Phase change materials
Phase change materials, or PCMs, are a technology that is used to store sensible and latent heat within a building structure at a higher storage capacity than standard building materials. PCMs have been studied extensively due to the ability to store heat and transfer heating and cooling demands from conventional peak times to off-peak times.
The concept of thermal mass of a building for heat storage, that the physical structure of the building absorbs heat to help cool the air, has long been understood and investigated. A study of PCMs in comparison to traditional building materials has shown that the thermal storage capacity of PCMs is twelve times higher than standard building materials over the same temperature range. The pressure drop across PCMs has not been investigated to be able to comment on the effect that the material may have on air streams. However, as the PCM can be incorporated directly into the building structure, this would not affect the flow in the same way other heat exchanger technologies do, it can be suggested that there is no pressure loss created by the inclusion of PCMs in the building fabric.
Applications
Rotary thermal wheel
O’Connor et al. studied the effect that a rotary thermal wheel has on the supply air flow rates into a building. A computational model was created to simulate the effects of a rotary thermal wheel on air flow rates when incorporated into a commercial
wind tower
A windcatcher, wind tower, or wind scoop ( ar, برجيل ; fa, بادگیر) is a traditional architectural element used to create cross ventilation and passive cooling in buildings. Windcatchers come in various designs: unidirectional, bid ...
system. The simulation was validated with a scale model experiment in a closed-loop subsonic wind tunnel. The data obtained from both tests were compared in order to analyze the flow rates. Although the flow rates were reduced compared to a wind tower which did not include a rotary thermal wheel, the guideline ventilation rates for occupants in a school or office building were met above a external wind speed of 3 m/s, which is lower than the average wind speed of the UK (4–5 m/s).
No full scale experimental or field test data was completed in this study, therefore it cannot be conclusively proved that rotary thermal wheels are feasible for integration into a commercial wind tower system. However, despite the air flow rates decrease within the building after the introduction of the rotary thermal wheel, the reduction was not large enough to prevent the ventilation guideline rates being met. Sufficient research has not yet been conducted to determine the suitability of rotary thermal wheels in natural ventilation, ventilation supply rates can be met but the thermal capabilities of the rotary thermal wheel have not yet been investigated. Further work would beneficial to increase understanding of the system.
Fixed plate heat exchangers
![Płytowy GPWC wewnątrz obrysu fundamentowego](https://upload.wikimedia.org/wikipedia/commons/4/4f/P%C5%82ytowy_GPWC_wewn%C4%85trz_obrysu_fundamentowego.JPG)
Mardiana et al. integrated a fixed plate heat exchanger into a commercial wind tower, highlighting the advantages of this type of system as a means of zero energy ventilation which can be simply modified. Full scale laboratory testing was undertaken in order to determine the effects and efficiency of the combined system. A wind tower was integrated with a fixed plate heat exchanger and was mounted centrally on a sealed test room.
The results from this study indicate that the combination of a wind tower passive ventilation system and a fixed plate heat recovery device could provide an effective combined technology to recover waste heat from exhaust air and cool incoming warm air with zero energy demand. Though no quantitative data for the ventilation rates within the test room was provided, it can be assumed that due to the high pressure loss across the heat exchanger that these were significantly reduced from standard operation of a wind tower. Further investigation of this combined of technology is essential in understanding the air flow characteristics of the system.
Heat pipes
Due to the low pressure loss of heat pipe systems, more research has been conducted into the integration of this technology into
passive ventilation
Passive ventilation is the process of supplying air to and removing air from an indoor space without using mechanical systems. It refers to the flow of external air to an indoor space as a result of pressure differences arising from natural forces ...
than other heat recovery systems. Commercial wind towers were again used as the passive ventilation system for integrating this heat recovery technology. This further enhances the suggestion that commercial wind towers provide a worthwhile alternative to mechanical ventilation, capable of supplying and exhausting air at the same time.
Run-around systems
Flaga-Maryanczyk et al. conducted a study in Sweden which examined a passive ventilation system which integrated a run-around system using a ground source heat pump as the heat source to warm incoming air. Experimental measurements and weather data were taken from the passive house used in the study. A CFD model of the passive house was created with the measurements taken from the sensors and weather station used as input data. The model was run to calculate the effectiveness of the run-around system and the capabilities of the ground source heat pump.
Ground source heat pumps provide a reliable source of consistent thermal energy when buried 10–20 m below the ground surface. The ground temperature is warmer than ambient air in winter and cooler than ambient air in summer, providing both heat source and heat sink. It was found that in February, the coldest month in the climate, that the ground source heat pump was capable of delivering almost 25% of the heating needs of the house and occupants.
Phase change materials
The majority of research interest in PCMs is the application of phase change material integration into traditional porous building materials such as concrete and wall boards. Kosny et al. analyzed the thermal performance of buildings which have PCM enhanced construction materials within the structure. Analysis showed that the addition of PCMs is beneficial in terms of improving the thermal performance.
A significant drawback of PCM use in a passive ventilation system for heat recovery is the lack of instantaneous heat transfer across different airstreams. Phase change materials are a heat storage technology, whereby the heat is stored within the PCM until the air temperature has fallen to a significant level where it can be released back into the air stream. No research has been conducted into the use of PCMs between two airstreams of different temperature where continuous, instantaneous heat transfer can occur. An investigation into this area would be beneficial for passive ventilation heat recovery research.
Advantages and disadvantages
Environmental impacts
Energy saving is one of the key issues for both fossil fuel consumption and protection of global environment. The rising cost of energy and the global warming underlined that developing of the improved energy systems is necessary to increase the energy efficiency while reducing
greenhouse gas emissions
Greenhouse gas emissions from human activities strengthen the greenhouse effect, contributing to climate change. Most is carbon dioxide from burning fossil fuels: coal, oil, and natural gas. The largest emitters include coal in China and lar ...
. The most effective way to reduce energy demand is to use energy more efficiently. Therefore, waste heat recovery is becoming popular in recent years since it improves energy efficiency. About 26% of industrial energy is still wasted as hot gas or fluid in many countries.
However, during last two decades there has been remarkable attention to recover waste heat from various industries and to optimize the units which are used to absorb heat from waste gases. Thus, these attempts enhance reducing of global warming as well as of energy demand.
Energy consumption
In most industrialized countries,
HVAC
Heating, ventilation, and air conditioning (HVAC) is the use of various technologies to control the temperature, humidity, and purity of the air in an enclosed space. Its goal is to provide thermal comfort and acceptable indoor air quality. HV ...
are responsible for one-third of the total
energy consumption
Energy consumption is the amount of energy used.
Biology
In the body, energy consumption is part of energy homeostasis. It derived from food energy. Energy consumption in the body is a product of the basal metabolic rate and the physical activity ...
. Moreover, cooling and dehumidifying fresh ventilation air composes 20–40% of the total energy load for HVAC in hot and humid climatic regions. However, that percentage can be higher where 100% fresh air ventilation is required. This means more energy is needed to meet the fresh air requirements of the occupants. The heat recovery is getting a necessity due to an increasing energy cost for treatment of fresh air. The main purpose of heat recovery systems is to mitigate the energy consumption of buildings for heating, cooling and ventilation by recovering the waste heat. In this regard, stand alone or combined heat recovery systems can be incorporated into the residential or commercial buildings for energy saving. Reduction in energy consumption levels can also notably contribute in reducing greenhouse gas emissions for a sustainable world.
Greenhouse gases
CO
2, N
2O and CH
4 are common
greenhouse gas
A greenhouse gas (GHG or GhG) is a gas that Absorption (electromagnetic radiation), absorbs and Emission (electromagnetic radiation), emits radiant energy within the thermal infrared range, causing the greenhouse effect. The primary greenhouse ...
es and CO
2 is the largest contributor to climate change. Therefore, the greenhouse gas emissions are frequently denoted as CO
2 equivalent emissions. Total global greenhouse gas emissions increased 12.7% between 2000 and 2005. In 2005, around 8.3 Gt CO
2 was released by building sector. Moreover, buildings are responsible for more than 30% of greenhouse gas emissions each year in most of developed countries. According to another study, buildings in European Union countries cause about 50% of the CO
2 emissions in the atmosphere. It is possible to mitigate the greenhouse gas emissions by 70% compared to the levels expected to be seen in 2030 if the proper measures are taken. The increase in greenhouse gas emissions due to high demand of energy use concluded as global warming. In this regard, mitigating gas emissions in the atmosphere stands out as one of the most crucial problems of the world today that should be resolved. Heat recovery systems have a remarkable potential to contribute in decreasing greenhouse gas emissions by reducing the energy required to heat and cool buildings. The Scotch Whisky Association has carried out a project at Glenmorangie distillery to recover latent heat from new wash stills to heat other process waters. They have found that 175 t a year of CO
2 will be saved with a payback period of under one year. In another report, it is underlined that 10 MW of recovered heat can be utilized for saving €350,000 per year in emission costs. UK Climate Change Act of 2008 is targeting a 34% reduction in greenhouse gas emissions by 2020 compared with 1990 levels and an 80% reduction by 2050. They emphasize the notable potential and importance of heat recovery technologies to achieve this goal.
See also
*
HVAC
Heating, ventilation, and air conditioning (HVAC) is the use of various technologies to control the temperature, humidity, and purity of the air in an enclosed space. Its goal is to provide thermal comfort and acceptable indoor air quality. HV ...
*
Heat exchanger
A heat exchanger is a system used to transfer heat between a source and a working fluid. Heat exchangers are used in both cooling and heating processes. The fluids may be separated by a solid wall to prevent mixing or they may be in direct contac ...
*
Solar air heat
Solar air heating is a solar thermal technology in which the energy from the sun, insolation, is captured by an absorbing medium and used to heat air. Solar air heating is a renewable energy heating technology used to heat or condition air for buil ...
*
Renewable heat Renewable heat is an application of renewable energy referring to the generation of heat from renewable sources; for example, feeding radiators with water warmed by focused solar radiation rather than by a fossil fuel boiler. Renewable heat technol ...
*
Water heat recycling
Water heat recycling (also known as drain water heat recovery, waste water heat recovery, greywater heat recovery, or sometimes shower water heat recovery) is the use of a heat exchanger to recover energy and reuse heat from drain water from vario ...
*
Seasonal thermal energy storage
Seasonal thermal energy storage (STES), also known as inter-seasonal thermal energy storage,
is the storage of heat or cold for periods of up to several months. The thermal energy can be collected whenever it is available and be used whenever nee ...
*
Passive cooling
*
Solar air conditioning
Solar air conditioning, or "solar-powered air conditioning", refers to any air conditioning (cooling) system that uses solar power.
This can be done through passive solar design, solar thermal energy conversion, and photovoltaic conversion (sunl ...
*
Air conditioning - Health implications
*
Passive house
"Passive house" (german: Passivhaus) is a voluntary standard for energy efficiency in a building, which reduces the building's ecological footprint. It results in ultra-low energy buildings that require little energy for space heating or coo ...
- ''"Passivhaus"''
*
Low-energy house
A low-energy house is characterized by an energy-efficient design and technical features which enable it to provide high living standards and comfort with low energy consumption and carbon emissions. Traditional heating and active cooling systems ...
*
Low energy building
Low-energy buildings, which include zero-energy buildings, passive houses and green buildings, may use any of a large number of techniques to lower energy use.
The following are some of the techniques used to achieve low-energy buildings, which e ...
*
List of low-energy building techniques
Low-energy buildings, which include zero-energy buildings, passive houses and green buildings, may use any of a large number of techniques to lower energy use.
The following are some of the techniques used to achieve low-energy buildings, which e ...
*
Green building
Green building (also known as green construction or sustainable building) refers to both a structure and the application of processes that are environmentally responsible and resource-efficient throughout a building's life-cycle: from planni ...
*
Zero energy building
A Zero Energy Building (ZEB), also known as a Net Zero Energy (NZE) building, is a building with net zero energy consumption, meaning the total amount of energy used by the building on an annual basis is equal to the amount of renewable energy c ...
*
Sustainability
Specific definitions of sustainability are difficult to agree on and have varied in the literature and over time. The concept of sustainability can be used to guide decisions at the global, national, and individual levels (e.g. sustainable livi ...
*
Sustainable architecture
Sustainable architecture is architecture that seeks to minimize the negative environmental impact of buildings through improved efficiency and moderation in the use of materials, energy, development space and the ecosystem at large. Sustainable ...
*
Sustainable design
Environmentally sustainable design (also called environmentally conscious design, eco-design, etc.) is the philosophy of designing physical objects, the built environment, and services to comply with the principles of ecological sustainability ...
References
External links
*
AIVCbr>
Information Paper VIP6 "Air-to-Air Heat Recovery in Ventilation Systems"Heat recovery in IndustryEnergy and Heat Recovery Ventilators (ERV/HRV)Heat Recovery Ventilation system CostBuilder Insight Bulletin - Heat Recovery Ventilation
{{Authority control
Heating
Ventilation
Residential heating
Sustainable building
Low-energy building
Energy conservation
Energy recovery