![Goldleaf](https://upload.wikimedia.org/wikipedia/commons/5/57/Goldleaf.jpg)
A gilder's tip is a type of
gilding brush used for transferring sheets of
gold
Gold is a chemical element with the symbol Au (from la, aurum) and atomic number 79. This makes it one of the higher atomic number elements that occur naturally. It is a bright, slightly orange-yellow, dense, soft, malleable, and ductile me ...
,
silver
Silver is a chemical element with the symbol Ag (from the Latin ', derived from the Proto-Indo-European ''h₂erǵ'': "shiny" or "white") and atomic number 47. A soft, white, lustrous transition metal, it exhibits the highest electrical ...
, or other precious
metal leaf
A metal leaf, also called composition leaf or schlagmetal, is a thin foil used for gilding and other forms of decoration. Metal leaves can come in many different shades. Some metal leaves may look like gold leaf but do not contain any real gold. ...
to either a surface that has been prepared to accept the leaf or to a
gilder's block where the leaf is then cut with a
gilder's knife into smaller portions before being transferred to the prepared surface. The hairs on a gilder's tip are usually made of either
blue squirrel hair or the hair of a
badger
Badgers are short-legged omnivores in the family Mustelidae (which also includes the otters, wolverines, martens, minks, polecats, weasels, and ferrets). Badgers are a polyphyletic rather than a natural taxonomic grouping, being united by ...
(sometimes other hairs are also used, such as that of a
camel)
arranged in a single or double row along a flat
ferrule
A ferrule (a corruption of Latin ' "small bracelet", under the influence of ' "iron") is any of a number of types of objects, generally used for fastening, joining, sealing, or reinforcement. They are often narrow circular rings made from me ...
made of wood or cardboard. In order to transfer the gold leaf, the hairs are first given a very light coating of adhesive by brushing them against a surface such as the back of the user's hand which has been coated with a thin layer of
petroleum jelly (a common misconception is that static electricity causes the gold foil to attach to the brush, but this is not so) and then laying the edge of the brush along the edge of the piece of metal foil. The jelly will cause the metal to adhere very gently to the hairs and allow the piece to be floated from the paper surface on which had previously been stored. Because the leaf is so thin, this must be done in a room with extremely still air, and the user of the tip usually does not breathe until the leaf is in place. Once the leaf has settled, it is often
burnish
Burnishing may refer to:
* Burnishing (metal), plastic deformation of a surface due to sliding contact with another object
* Burnishing (pottery)
Burnishing is a form of pottery treatment in which the surface of the pot is polished, using a ...
ed with polished piece of
agate
Agate () is a common rock formation, consisting of chalcedony and quartz as its primary components, with a wide variety of colors. Agates are primarily formed within volcanic and metamorphic rocks. The ornamental use of agate was common in Anci ...
to achieve a high degree of brilliance.
Gilder's tips are necessary because touching the metal leaf with the finger tips would immediately cause the leaf to lose its coherent flattened shape and crumble irretrievably into metallic dust which then cannot be used for any purpose.
[
]
References
{{reflist
Gilding