Fiat Tipo (2015)

The Fiat Tipo (codeproject ''Type 356'', also known as the Fiat Egea (stylized as ÆGEA) in Turkey and Dodge Neon in Mexico and the Middle East) is a compact car. A three-box sedan version was unveiled at the 2015 Istanbul Motor Show in May 2015, and commenced sales in Turkey in October 2015.

In 2016, it was followed by a hatchback and a station wagon version, for the European market. The Tipo is assembled at the Tofaş plant in Bursa, Turkey, by the Italian automaker Fiat and is built on the Fiat Small Wide LWB platform.
It replaced the Bravo and Linea in the C-segment range. The Tipo was designed by Centro Stile Fiat in Mirafiori, Turin, and co-developed by Tofaş, a joint venture between the Fiat Group and Koç Holding. In December 2015, the car won the 2016 ''Best Buy Car of Europe'' Award, from the ''Autobest'' jury made up of Europe's twenty-six leading journalists, from twenty-six different European countries.

In February 2019, the 500,000th Fiat Tipo was produced at the Bursa plant, in Turkey.

At the end of October 2020 (28th), a total of 670,000 units of Fiat Tipo had been produced and distributed in over 40 Countries around the world.

In 2021, Fiat introduced a facelift to the Tipo with a new motor, new levels of security, technology and a new ''Cross'' version. The new change of this facelift introduced the new gasoline engines of the Global Small Engine (FireFly) family produced by FCA Poland Powertrain in Bielsko-Biała in only one version: 1.0 L Turbo 3-cylinder 120 hp with direct injection, Multiair system and GPF filter, the 1.0 L is available with a 5-speed manual transmission and front-wheel drive, this new motor is for the models Jeep Renegade, Fiat 500 and Fiat Tipo (2015).

In March 2022, the new 1.5-liter GSE (Global Small Engine) T4, four-cylinder, 130 HP and 240 Nm of torque, also from the FireFly family, is introduced in Italy, Europe, Turkey and in the United Arab Emirates (like the previous 1.0 T3), Turbo petrol but with hybrid technology, combined with a 48V electric motor that integrates a small additional 15 kW unit, the latter installed in the new seven-speed dual-clutch DCT automatic transmission, capable of allowing a more silent start (100% electric) and to use the car in fully electric mode (e-launch), in parking maneuvers or in small forward movements at walking pace (e-queuing), such as when in queue in city traffic. This advanced hybrid technology represents a significant leap forward for Fiat, improving the efficiency and dynamics of the vehicle and allowing it to travel even with the thermal engine switched off.

The petrol engine, in fact, thanks to the electric one, can remain inactive up to 47% of the time.

For this reason, the new 130 bhp 1.5-liter GSE T4 e-motor has been defined by experts in the field of automotive (not a mild-hybrid, introduced on the Fiat Panda and Fiat 500 only, but) a mini Full-hybrid or Middle-hybrid, (i.e. a via between a full-hybrid and a mild-hybrid), according to the hybrid cars of other brands such as Toyota, which was the first to introduce this technology in the automotive market.

This new advanced hybrid engine, developed by the engineers of the FCA Group (also introduced on the new Alfa Romeo Tonale, on the Fiat 500X hybrid, as well as on the Jeep Renegade and Compass models), also allows an 11% reduction in compared to the previous version, with declared consumption, for the new Fiat Tipo hybrid, of just 4.7 l/ 100 km.

In November 2022 the 1 million Tipo was produced at Bursa plant.

History

The Project Ægea

The development of the Tipo family began in 2014 when Fiat announced the ''Ægea project'' (Type 356) developed in a joint venture between Fiat (FCA Italy) and Tofaş. Specifically, the Italian manufacturer was building a family of C-segment cars to be marketed in Europe, the Middle East and Africa (EMEA) to replace both the old Fiat Bravo hatchback and the Linea sedan. The production site chosen was the Turkish Bursa plant (owned by Fiat and Tofaş), which already produced the previous Linea. Alfredo Altavilla, at the time director of the EMEA area of the FCA Italy group, and Olivier François, director of Fiat brand, declared that the ''Ægea'' family had been built according to the Fiat "''Rational''" range (including Panda, Punto, Fiorino and Doblò) vehicles characterized by functional solution, low running costs, spacious interior and low price list.

The first version to be presented was the three-volume saloon at the Istanbul Motor Show in May 2015; called Fiat Egea, the car went into production in November of the same year, replacing the Linea in the Fiat range of products in Turkey. The name Egea is used only on the Turkish market because the term is very well known among the Turkish population as it identifies both the Aegean Sea that bathes the coasts of Turkey and the ancient medieval town of Yumurtalık. Production started in October of the same year for the Turkish market. Later the hatchback 5 door and station wagon versions were announced for spring 2016 with a different name on the European markets. In October 2015 Alfredo Altavilla announced that the official name of the cars for the European market would be Fiat Tipo, taking the historical name of the Fiat model of the 80s known for its spacious interior and low running costs. Fiat and Tofaş have invested a total of 1.5 billion dollars for the development and production of the Tipo.

The Tipo in the European market

In November 2015 sales of the Fiat Tipo sedan started in Italy, Spain and France. The 5-door hatchback and station wagon versions were presented at the Geneva Motor Show in March 2016. In 2016 the Tipo is officially on sale in all three of its variants throughout Europe, to the exception of the United Kingdom where the sedan is not imported due to the low demand for this type of vehicle.
At the debut the engine range consisted of the 1.4 ''Fire'' 16V petrol delivering 95 hp, the 1.6 ''E.torQ'' 16V with 110 hp, the 1.3 ''Multijet II'' 16V diesel with 95 hp and 1.6 ''Multijet'' II diesel with 120 hp.

In 2017 the Tipo range is enlarged with the entry of the Van station wagon variant available in the countries of southern Europe with a two-seat cabin. Also in 2017, dual-fuel variants (called ''EasyPower'') are introduced powered by petrol and LPG.

File:Fiat Tipo 356 Berlina.jpg, Sedan (4-door)
File:Fiat Tipo SW (1).jpg, Station Wagon (5-door)
File:2016 Fiat Tipo Easy+ T-Jet 1.4 Rear.jpg, Hatchback (5-door)
File:Fiat Tipo Cross IMG 4880.jpg, Cross (5-door)

The Tipo in other markets

In addition to the European market, the Tipo is also sold in 2016 in Africa in hatchback and sedan version. Originally the Tipo had been developed to be sold in 40 world markets. In 2016 FCA decided to also sell it in Mexico, albeit under the Dodge Neon name, as the Dodge brand has a much larger sales network in Mexico than Fiat does. Moreover, the name Neon takes the name of the homonymous Dodge model produced by the Chrysler Group in the nineties and two-thousands, a model that was very successful in Mexico. The Mexican market only receives the three-volume saloon variant. From 2017 the Tipo is sold as a Dodge Neon in the Middle East as well. In South America, the Tipo sedan is sold under the Fiat brand only in Argentina and Chile, as the South American branch of the Italian brand already offers the slightly more compact Fiat Cronos, a compact sedan produced in Córdoba, Argentina. As of November 2020, the Tipo is no longer available in Argentina.

Overview

Design

The Fiat Tipo design was created by the Centro Stile Fiat located in the ''Officina 83'' of the Fiat Mirafiori Plant. The style team was led by Alberto Dilillo and Roberto Giolito. Compared to the previous Linea and Bravo, the Tipo is designed first in the three-volume sedan form independent from the remaining two versions so as to create a more harmonious and elegant body. Alberto Dilillo declares that the inspiration of the designers for the front comes directly from the Maserati models with the headlights connected to the grille and the air intakes with three-dimensional chrome elements. The front has a lower shape and developed horizontally, while the previous Linea and Bravo had a much more inclined snout and connected with the windshield. In the rear, the trunk lid has a shape that simulates a spoiler.
The hatchback and station wagon versions have the same front, the hatchback also inherits the same side of the four-door sedan including the doors, the station wagon instead has specific rear doors.

The Fiat Tipo sedan is 4532 mm long, 1497 mm tall and 1792 mm wide with a wheelbase of 2638 mm and a five-seat passenger compartment with a 520-litre trunk. The hatchback has the same wheelbase but the bodywork is 4368 mm long, 1495 mm tall and 1792 mm wide. The trunk has a capacity of 440 litres. The station wagon (estate) is 4571 mm long, 1792 mm wide and 1514 mm tall and has the same wheelbase as the sedan and hatchback versions. The minimum luggage capacity is 550 litres.

The interior of the Tipo has two different dashboards depending on the trim level. The base models have the upper part that integrates the radio or the Uconnect 5-inch infotainment system connected to the instrumentation, while the top models have the upper part with the tablet-style 7-inch Uconnect HD infotainment system. The lower part of the dashboard is identical for all versions and is inherited from the Fiat Punto (199).
The right-hand drive models have a single dashboard for all trim levels, the same as the LHD models in the basic version with the upper dashboard connected to the instrumentation and which integrates the various 5-inch and 7-inch Uconnect infotainment systems.

Chassis

The base chassis is the front-wheel drive Small Wide modular platform with a long wheelbase, an enlarged and extended version of the Small platform. The front suspension use a McPherson structure with telescopic shock absorbers and rear suspension use a torsion beam and telescopic shock absorbers. The same Small Wide platform is used by many Fiat Chrysler Automobiles group cars such as the Fiat 500L, Fiat 500X, Jeep Renegade, Fiat Toro etc. Production takes place at the Bursa plant in Turkey, which already produced the Fiat Linea, also based on the previous Small platform.

Engines

* 1.4 16V FIRE engine option is still available for the sedan, hatchback and Cross models of the Fiat Egea.

Safety

The test for Euro NCAP was changed for 2016, so that every car would be tested with standard equipment and additionally with "safety pack" if safety equipment is considered as optional extra. The Tipo had only three stars in the Euro NCAP test with standard equipment, and four stars with speed limiter and brake assistance.

Sales

References

Further reading

*

External links

*

Fiat Egea website
(archived)

{{Dodge Mexico Timeline

Tipo
Compact cars
Sedans
Station wagons
Cars introduced in 2015
2010s cars
Front-wheel-drive vehicles
Euro NCAP small family cars
Cars of Turkey