In fluid thermodynamics, the film temperature () is an approximation of the

temperature Temperature is a physical quantity that expresses quantitatively the perceptions of hotness and coldness. Temperature is measured with a thermometer. Thermometers are calibrated in various temperature scales that historically have relied o ...

of a

fluid In physics, a fluid is a liquid, gas, or other material that continuously deforms (''flows'') under an applied shear stress, or external force. They have zero shear modulus, or, in simpler terms, are substances which cannot resist any shear ...

inside a

convection Convection is single or multiphase fluid flow that occurs spontaneously due to the combined effects of material property heterogeneity and body forces on a fluid, most commonly density and gravity (see buoyancy). When the cause of the convec ...

boundary layer In physics and fluid mechanics, a boundary layer is the thin layer of fluid in the immediate vicinity of a bounding surface formed by the fluid flowing along the surface. The fluid's interaction with the wall induces a no-slip boundary condi ...

. It is calculated as the

arithmetic mean In mathematics and statistics, the arithmetic mean ( ) or arithmetic average, or just the ''mean'' or the ''average'' (when the context is clear), is the sum of a collection of numbers divided by the count of numbers in the collection. The colle ...

of the temperature at the surface of the solid boundary wall () and the free-stream temperature (): :

T_f=\frac

The film temperature is often used as the temperature at which fluid properties are calculated when using the

Prandtl number The Prandtl number (Pr) or Prandtl group is a dimensionless number, named after the German physicist Ludwig Prandtl, defined as the ratio of momentum diffusivity to thermal diffusivity. The Prandtl number is given as: : \mathrm = \frac = \frac ...

Nusselt number In Thermal fluids, thermal fluid dynamics, the Nusselt number (, after Wilhelm Nusselt) is the ratio of convection, convective to heat conduction, conductive heat transfer at a boundary (thermodynamic), boundary in a fluid. Convection includes bo ...

Reynolds number In fluid mechanics, the Reynolds number () is a dimensionless quantity that helps predict fluid flow patterns in different situations by measuring the ratio between inertial and viscous forces. At low Reynolds numbers, flows tend to be domi ...

or Grashof number to calculate a

heat transfer coefficient In thermodynamics, the heat transfer coefficient or film coefficient, or film effectiveness, is the proportionality constant between the heat flux and the thermodynamic driving force for the flow of heat (i.e., the temperature difference, ). ...

, because it is a reasonable first approximation to the temperature within the convection boundary layer. Somewhat confusing terminology may be encountered in relation to

boiler A boiler is a closed vessel in which fluid (generally water) is heated. The fluid does not necessarily boil. The heated or vaporized fluid exits the boiler for use in various processes or heating applications, including water heating, central h ...

s and

heat exchanger A heat exchanger is a system used to transfer heat between a source and a working fluid. Heat exchangers are used in both cooling and heating processes. The fluids may be separated by a solid wall to prevent mixing or they may be in direct contac ...

s, where the same term is used to refer to the limit (hot) temperature of a fluid in contact with a hot surface.Bulk and Film Temperatures
/ref>

References

Fluid dynamics Heat transfer