History
At first, Polish engineers wanted Syrena to have a four-stroke air-cooled engine and a self-supporting chassis. But due to a lack of deep-drawn metal parts and cost reductions, the first Syrena 100 cars were supposed to have a wooden bodywork covered with leather-like material. The cars were powered by 2-stroke engines designed by engineerSyrena 100
Syrena 100 was designed by engineers Stanislaw Lukasiewicz, Stanislaw Panczakiewicz and Fryderyk Bluemke. It was introduced to the public in June 1955 at the 24th Poznań Trade Fair. The car aroused much interest, which prompted the government to put it into production. At first, the production rate was to be 10,000 cars a year. Because of financial reasons, Syrena 100 and the much larger Warszawa automobile shared many parts. As a result, the Syrena was much heavier than intended (950 kg).Syrena 101
In 1960 Syrena underwent a first, minor modernisation. The improved car had a pneumatic fuel pump and a different type ofSyrena 102
The Syrena 102, produced in 1962 and 1963, had slightly different body details. The "S" version of this model shared an engine with Wartburg 312. Around 150 examples of Syrena 102S were produced.Syrena 103
Syrena 103 (1963–66) had a restyled front and a different engine.Syrena 104
The next model lasted from 1966 to 1972. It had a new, three-cylinder engine, a synchronized gearbox and restyled tail lights.Syrena 105
The 105 was the last Syrena design. It was produced from 1972 to 1983 by the FSM factory and was badged accordingly. Unlike its predecessors it had regular front doors instead of "suicide" ones. The "Lux" version, produced from 1974, had the gear lever and handbrake between the front seats. The 105 served as a basis for two other models – Syrena R-20, which was a pick-up and a van – Bosto. A 1983 FSM Syrena 105L finished in yellow was featured in series 10 episode 10 of the British television program '' Wheeler Dealers''. Presenter Mike Brewer purchased the car in Poland for zł7,000 (the equivalent of £1,400) and drove it back to the show's UK-based workshop where it underwent repairs and upgrades by mechanic Edd China. The colour was changed to red and white in homage to the Polish flag. Other work included upgrades to the steering box, refurbishing the drum brakes, replacing the dynamo with an alternator and replacing the radio. The total cost of procuring and upgrading the car reached £5454. The completed car was driven to the Polish embassy where ambassador Witold Sobków took a ride with them. The car was later sold for £8,000 to the bubble car museum in Lincolnshire.Syrena Bosto
The Syrena Bosto panel van and its pickup truck sister, the Syrena R-20, were first introduced to the 104 models of the Syrena. The name is an acronym of ''Bielski Osobowo-Towarowy'', or "Passenger-Cargo arof Bielsko." The first model of the Bosto was revealed in December 1971, at the newly constructed FSM factory in Bielsko-Biala in southern Poland. The final model finished production 30 April 1983. Overall, approximately 135,000 Bostos were built. The Bosto 104B started official production in 1972, and was available as a four-seater van, capable of carrying 200 kg of freight, or as a two-seater cab with a 350 kg load rating. The second edition, Syrena Bosto 105B, replaced the 104 in 1976. Essentially the same vehicle stylistically, the differences were in construction. Uprated semi-elliptical springs from the FSO Warszawa, an increased fuel tank borrowed from the FSO 125p, and the handbrake moved to the "standard" position between the front seats were the main modifications. As with the Syrena saloon the 3-cylinder, 2-stroke engine was mounted longitudinally in front of the front axle and powered the front wheels through a gearbox with driveshafts coming sideways out of it. The driver's compartment was separated from the rear load space by a single sheet bulkhead, and additional roof-fixed netting. Because the Bosto was designed for heavy loads, as opposed to the sedan version of the Syrena, the suspension underneath was modified. An extended chassis held a rear trailing axle on leaf suspension, each with a hydraulic suspension damper. This allowed a lower floor level, and in turn allowed FSM to borrow directly parts from the Zuk A05/A06.Dimensions
Weight: 950 kg Wheelbase: 2300mm Length: 39650mm Rear Compartment: H-1600 mm x W-1470 mmSyrena Sport
In 1960 a prototype Syrena Sport was produced with a fibreglass body and a four-stroke two-cylinder engine. However, this model was not put into production.See also
* List of Eastern European carsReferences
External links