![Emulsions](https://upload.wikimedia.org/wikipedia/commons/c/ca/Emulsions.svg)
An emulsion is a
mixture
In chemistry, a mixture is a material made up of two or more different chemical substances which are not chemically bonded. A mixture is the physical combination of two or more substances in which the identities are retained and are mixed in the ...
of two or more
liquid
A liquid is a nearly incompressible fluid that conforms to the shape of its container but retains a (nearly) constant volume independent of pressure. As such, it is one of the four fundamental states of matter (the others being solid, gas, a ...
s that are normally
immiscible (unmixable or unblendable) owing to liquid-liquid
phase separation
Phase separation is the creation of two distinct phases from a single homogeneous mixture. The most common type of phase separation is between two immiscible liquids, such as oil and water. Colloids are formed by phase separation, though ...
. Emulsions are part of a more general class of two-phase systems of
matter
In classical physics and general chemistry, matter is any substance that has mass and takes up space by having volume. All everyday objects that can be touched are ultimately composed of atoms, which are made up of interacting subatomic part ...
called
colloids. Although the terms ''colloid'' and ''emulsion'' are sometimes used interchangeably, ''emulsion'' should be used when both phases, dispersed and continuous, are liquids. In an emulsion, one liquid (the dispersed
phase
Phase or phases may refer to:
Science
*State of matter, or phase, one of the distinct forms in which matter can exist
*Phase (matter), a region of space throughout which all physical properties are essentially uniform
* Phase space, a mathematic ...
) is
dispersed in the other (the continuous phase). Examples of emulsions include
vinaigrette
Vinaigrette ( , ) is made by mixing an oil with a mild acid such as vinegar or lemon juice (citric acid). The mixture can be enhanced with salt, herbs and/or spices. It is used most commonly as a salad dressing, but can also be used as a marina ...
s, homogenized
milk
Milk is a white liquid food produced by the mammary glands of mammals. It is the primary source of nutrition for young mammals (including breastfed human infants) before they are able to digestion, digest solid food. Immune factors and immune ...
, liquid
biomolecular condensate
In biochemistry, biomolecular condensates are a class of lipid bilayer, membrane-less organelles and organelle subdomains, which carry out specialized functions within the cell (biology), cell. Unlike many organelles, biomolecular condensate com ...
s, and some
cutting fluid
Cutting fluid is a type of coolant and lubricant designed specifically for metalworking processes, such as machining and stamping. There are various kinds of cutting fluids, which include oils, oil-water emulsions, pastes, gels, aerosols (mists) ...
s for
metal working
Metalworking is the process of shaping and reshaping metals to create useful objects, parts, assemblies, and large scale structures. As a term it covers a wide and diverse range of processes, skills, and tools for producing objects on every scale ...
.
Two liquids can form different types of emulsions. As an example, oil and water can form, first, an oil-in-water emulsion, in which the oil is the dispersed phase, and water is the continuous phase. Second, they can form a water-in-oil emulsion, in which water is the dispersed phase and oil is the continuous phase. Multiple emulsions are also possible, including a "water-in-oil-in-water" emulsion and an "oil-in-water-in-oil" emulsion.
Emulsions, being liquids, do not exhibit a static internal structure. The droplets dispersed in the continuous phase (sometimes referred to as the "dispersion medium") are usually assumed to be
statistically distributed to produce roughly spherical droplets.
The term "emulsion" is also used to refer to the photo-sensitive side of
photographic film
Photographic film is a strip or sheet of transparent film base coated on one side with a gelatin photographic emulsion, emulsion containing microscopically small light-sensitive silver halide crystals. The sizes and other characteristics of th ...
. Such a
photographic emulsion
Photographic emulsion is a light-sensitive colloid used in film-based photography. Most commonly, in silver-gelatin photography, it consists of silver halide crystals dispersed in gelatin. The emulsion is usually coated onto a substrate of glas ...
consists of
silver halide colloidal particles dispersed in a
gelatin matrix.
Nuclear emulsion A nuclear emulsion plate is a type of particle detector first used in nuclear and particle physics experiments in the early decades of the 20th century. https://cds.cern.ch/record/1728791/files/vol6-issue5-p083-e.pdf''The Study of Elementary Partic ...
s are similar to photographic emulsions, except that they are used in particle physics to detect high-energy
elementary particle
In particle physics, an elementary particle or fundamental particle is a subatomic particle that is not composed of other particles. Particles currently thought to be elementary include electrons, the fundamental fermions ( quarks, leptons, an ...
s.
Etymology
The word "emulsion" comes from the Latin ''emulgere'' "to milk out", from ''ex'' "out" + ''mulgere'' "to milk", as milk is an emulsion of fat and water, along with other components, including
colloidal
casein
Casein ( , from Latin ''caseus'' "cheese") is a family of related phosphoproteins ( αS1, aS2, β, κ) that are commonly found in mammalian milk, comprising about 80% of the proteins in cow's milk and between 20% and 60% of the proteins in hum ...
micelles (a type of secreted
biomolecular condensate
In biochemistry, biomolecular condensates are a class of lipid bilayer, membrane-less organelles and organelle subdomains, which carry out specialized functions within the cell (biology), cell. Unlike many organelles, biomolecular condensate com ...
).
Appearance and properties
Emulsions contain both a dispersed and a continuous phase, with the boundary between the phases called the "interface".
Emulsions tend to have a cloudy appearance because the many
phase interfaces scatter light as it passes through the emulsion. Emulsions appear
white
White is the lightest color and is achromatic (having no hue). It is the color of objects such as snow, chalk, and milk, and is the opposite of black. White objects fully reflect and scatter all the visible wavelengths of light. White o ...
when all light is scattered equally. If the emulsion is dilute enough, higher-frequency (low-wavelength) light will be scattered more, and the emulsion will appear
blue
Blue is one of the three primary colours in the RYB colour model (traditional colour theory), as well as in the RGB (additive) colour model. It lies between violet and cyan on the spectrum of visible light. The eye perceives blue when obs ...
r – this is called the "
Tyndall effect
The Tyndall effect is light scattering by particles in a colloid or in a very fine suspension. Also known as Tyndall scattering, it is similar to Rayleigh scattering, in that the intensity of the scattered light is inversely proportional to ...
". If the emulsion is concentrated enough, the color will be distorted toward comparatively longer wavelengths, and will appear more
yellow
Yellow is the color between green and orange on the spectrum of light. It is evoked by light with a dominant wavelength of roughly 575585 nm. It is a primary color in subtractive color systems, used in painting or color printing. In the ...
. This phenomenon is easily observable when comparing
skimmed milk
Skimmed milk (British English), or skim milk (American English), is made when all the milkfat is removed from whole milk. It tends to contain around 0.1% fat.
Background
Historically, skimmed milk was used for fattening pigs, and was recommende ...
, which contains little fat, to
cream
Cream is a dairy product composed of the higher-fat layer skimmed from the top of milk before homogenization. In un-homogenized milk, the fat, which is less dense, eventually rises to the top. In the industrial production of cream, this process ...
, which contains a much higher concentration of milk fat. One example would be a mixture of water and oil.
Two special classes of emulsions –
microemulsion Microemulsions are clear, thermodynamically stable isotropic liquid mixtures of oil, water and surfactant, frequently in combination with a cosurfactant. The aqueous phase may contain salt(s) and/or other ingredients, and the "oil" may actually be ...
s and nanoemulsions, with droplet sizes below 100 nm – appear translucent.
This property is due to the fact that light waves are scattered by the droplets only if their sizes exceed about one-quarter of the wavelength of the incident light. Since the
visible spectrum
The visible spectrum is the portion of the electromagnetic spectrum that is visual perception, visible to the human eye. Electromagnetic radiation in this range of wavelengths is called ''visible light'' or simply light. A typical human eye wil ...
of light is composed of wavelengths between 390 and 750
nanometer
330px, Different lengths as in respect to the molecular scale.
The nanometre (international spelling as used by the International Bureau of Weights and Measures; SI symbol: nm) or nanometer (American and British English spelling differences#-re ...
s (nm), if the droplet sizes in the emulsion are below about 100 nm, the light can penetrate through the emulsion without being scattered. Due to their similarity in appearance, translucent nanoemulsions and microemulsions are frequently confused. Unlike translucent nanoemulsions, which require specialized equipment to be produced, microemulsions are spontaneously formed by "solubilizing" oil molecules with a mixture of
surfactants, co-surfactants, and co-
solvent
A solvent (s) (from the Latin '' solvō'', "loosen, untie, solve") is a substance that dissolves a solute, resulting in a solution. A solvent is usually a liquid but can also be a solid, a gas, or a supercritical fluid. Water is a solvent for ...
s.
The required surfactant concentration in a microemulsion is, however, several times higher than that in a translucent nanoemulsion, and significantly exceeds the concentration of the dispersed phase. Because of many undesirable side-effects caused by surfactants, their presence is disadvantageous or prohibitive in many applications. In addition, the stability of a microemulsion is often easily compromised by dilution, by heating, or by changing pH levels.
Common emulsions are inherently unstable and, thus, do not tend to form spontaneously. Energy input – through shaking, stirring,
homogenizing
Homogeneity and heterogeneity are concepts often used in the sciences and statistics relating to the uniformity of a substance or organism. A material or image that is homogeneous is uniform in composition or character (i.e. color, shape, s ...
, or exposure to power
ultrasound
Ultrasound is sound waves with frequency, frequencies higher than the upper audible limit of human hearing range, hearing. Ultrasound is not different from "normal" (audible) sound in its physical properties, except that humans cannot hea ...
– is needed to form an emulsion. Over time, emulsions tend to revert to the stable state of the phases comprising the emulsion. An example of this is seen in the separation of the oil and vinegar components of
vinaigrette
Vinaigrette ( , ) is made by mixing an oil with a mild acid such as vinegar or lemon juice (citric acid). The mixture can be enhanced with salt, herbs and/or spices. It is used most commonly as a salad dressing, but can also be used as a marina ...
, an unstable emulsion that will quickly separate unless shaken almost continuously. There are important exceptions to this rule – microemulsions are
thermodynamically stable, while translucent nanoemulsions are
kinetically stable.
Whether an emulsion of oil and water turns into a "water-in-oil" emulsion or an "oil-in-water" emulsion depends on the volume fraction of both phases and the type of emulsifier (surfactant) (see ''Emulsifier'', below) present.
Instability
Emulsion stability refers to the ability of an emulsion to resist change in its properties over time.
There are four types of instability in emulsions:
flocculation
Flocculation, in the field of chemistry, is a process by which colloidal particles come out of suspension to sediment under the form of floc or flake, either spontaneously or due to the addition of a clarifying agent. The action differs from pr ...
,
coalescence
Coalescence may refer to:
* Coalescence (chemistry), the process by which two or more separate masses of miscible substances seem to "pull" each other together should they make the slightest contact
* Coalescence (computer science), the merging of ...
,
creaming/
sedimentation
Sedimentation is the deposition of sediments. It takes place when particles in suspension settle out of the fluid in which they are entrained and come to rest against a barrier. This is due to their motion through the fluid in response to the ...
, and
Ostwald ripening
Ostwald ripening is a phenomenon observed in solid solutions or liquid sols that describes the change of an inhomogeneous structure over time, i.e., small crystals or sol particles dissolve, and redeposit onto larger crystals or sol particles ...
. Flocculation occurs when there is an attractive force between the droplets, so they form flocs, like bunches of grapes. This process can be desired, if controlled in its extent, to tune physical properties of emulsions such as their flow behaviour. Coalescence occurs when droplets bump into each other and combine to form a larger droplet, so the average droplet size increases over time. Emulsions can also undergo creaming, where the droplets rise to the top of the emulsion under the influence of
buoyancy
Buoyancy (), or upthrust, is an upward force exerted by a fluid that opposes the weight of a partially or fully immersed object. In a column of fluid, pressure increases with depth as a result of the weight of the overlying fluid. Thus the ...
, or under the influence of the
centripetal force induced when a
centrifuge
A centrifuge is a device that uses centrifugal force to separate various components of a fluid. This is achieved by spinning the fluid at high speed within a container, thereby separating fluids of different densities (e.g. cream from milk) or ...
is used.
Creaming is a common phenomenon in dairy and non-dairy beverages (i.e. milk, coffee milk,
almond milk
Almond milk is a plant-based milk with a watery texture and nutty flavor manufactured from almonds, although some types or brands are flavored in imitation of cow's milk. It does not contain cholesterol or lactose and is low in saturated fat. ...
, soy milk) and usually does not change the droplet size.
Sedimentation is the opposite phenomenon of creaming and normally observed in water-in-oil emulsions.
Sedimentation happens when the dispersed phase is denser than the continuous phase and the gravitational forces pull the denser globules towards the bottom of the emulsion. Similar to creaming, sedimentation follows Stokes' law.
An appropriate surface active agent (or surfactant) can increase the kinetic stability of an emulsion so that the size of the droplets does not change significantly with time. The stability of an emulsion, like a
suspension
Suspension or suspended may refer to:
Science and engineering
* Suspension (topology), in mathematics
* Suspension (dynamical systems), in mathematics
* Suspension of a ring, in mathematics
* Suspension (chemistry), small solid particles suspende ...
, can be studied in terms of
zeta potential
Zeta potential is the electrical potential at the slipping plane. This plane is the interface which separates mobile fluid from fluid that remains attached to the surface.
Zeta potential is a scientific term for electrokinetic potential in coll ...
, which indicates the repulsion between droplets or particles. If the size and dispersion of droplets does not change over time, it is said to be stable. For example, oil-in-water emulsions containing
mono- and diglycerides and milk protein as surfactant showed that stable oil droplet size over 28 days storage at 25°C.
Monitoring physical stability
The stability of emulsions can be characterized using techniques such as light scattering, focused beam reflectance measurement, centrifugation, and
rheology
Rheology (; ) is the study of the flow of matter, primarily in a fluid (liquid or gas) state, but also as "soft solids" or solids under conditions in which they respond with Plasticity (physics), plastic flow rather than deforming Elasticity (phy ...
. Each method has advantages and disadvantages.
Accelerating methods for shelf life prediction
The kinetic process of destabilization can be rather long – up to several months, or even years for some products. Often the formulator must accelerate this process in order to test products in a reasonable time during product design. Thermal methods are the most commonly used – these consist of increasing the emulsion temperature to accelerate destabilization (if below critical temperatures for phase inversion or chemical degradation). Temperature affects not only the viscosity but also the interfacial tension in the case of non-ionic surfactants or, on a broader scope, interactions between droplets within the system. Storing an emulsion at high temperatures enables the simulation of realistic conditions for a product (e.g., a tube of sunscreen emulsion in a car in the summer heat), but also accelerates destabilization processes up to 200 times.
Mechanical methods of acceleration, including vibration, centrifugation, and agitation, can also be used.
These methods are almost always empirical, without a sound scientific basis.
Emulsifiers
An emulsifier is a substance that stabilizes an emulsion by reducing the oil-water
interface tension. Emulsifiers are a part of a broader group of compounds known as
surfactants, or "surface-active agents". Surfactants are compounds that are typically
amphiphilic
An amphiphile (from the Greek αμφις amphis, both, and φιλíα philia, love, friendship), or amphipath, is a chemical compound possessing both hydrophilic (''water-loving'', polar) and lipophilic (''fat-loving'') properties. Such a compo ...
, meaning they have a polar or
hydrophilic
A hydrophile is a molecule or other molecular entity that is attracted to water molecules and tends to be dissolved by water.Liddell, H.G. & Scott, R. (1940). ''A Greek-English Lexicon'' Oxford: Clarendon Press.
In contrast, hydrophobes are ...
(i.e. water-soluble) part and a non-polar (i.e. hydrophobic or
lipophilic
Lipophilicity (from Greek λίπος "fat" and φίλος "friendly"), refers to the ability of a chemical compound to dissolve in fats, oils, lipids, and non-polar solvents such as hexane or toluene. Such non-polar solvents are themselves lipo ...
) part. Emulsifiers that are more soluble in water (and conversely, less soluble in oil) will generally form oil-in-water emulsions, while emulsifiers that are more soluble in oil will form water-in-oil emulsions.
Examples of food emulsifiers are:
*
Egg yolk – in which the main emulsifying and thickening agent is
lecithin.
*
Mustard
Mustard may refer to:
Food and plants
* Mustard (condiment), a paste or sauce made from mustard seeds used as a condiment
* Mustard plant, one of several plants, having seeds that are used for the condiment
** Mustard seed, seeds of the mustard p ...
– where a variety of chemicals in the
mucilage
Mucilage is a thick, gluey substance produced by nearly all plants and some microorganisms. These microorganisms include protists which use it for their locomotion. The direction of their movement is always opposite to that of the secretion of m ...
surrounding the seed hull act as emulsifiers
*
Soy lecithin
Lecithin (, from the Greek ''lekithos'' "yolk") is a generic term to designate any group of yellow-brownish fatty substances occurring in animal and plant tissues which are amphiphilic – they attract both water and fatty substances (and so a ...
is another emulsifier and thickener
*
Pickering stabilization – uses particles under certain circumstances
*
Sodium phosphates
Sodium phosphate is a generic term for a variety of salts of sodium (Na+) and phosphate (PO43−). Phosphate also forms families or condensed anions including di-, tri-, tetra-, and polyphosphates. Most of these salts are known in both anhydrou ...
– not directly an emulsifier, but modifies behavior of other molecules, e.g.
casein
Casein ( , from Latin ''caseus'' "cheese") is a family of related phosphoproteins ( αS1, aS2, β, κ) that are commonly found in mammalian milk, comprising about 80% of the proteins in cow's milk and between 20% and 60% of the proteins in hum ...
*
Mono- and diglycerides – a common emulsifier found in many food products (coffee creamers, ice creams, spreads, breads, cakes)
*
Sodium stearoyl lactylate
Sodium stearoyl-2-lactylate (sodium stearoyl lactylate or SSL) is a versatile, FDA approved food additive used to improve the mix tolerance and volume of processed foods. It is one type of a commercially available lactylate. SSL is non-toxic, ...
*
DATEM
DATEM (diacetyl tartaric acid ester of mono- and diglycerides, also E472e) is an emulsifier primarily used in baking to strengthen the gluten network in dough. It is added to crusty breads, such as rye, to impart a springy, chewy texture. I ...
(diacetyl tartaric acid esters of mono- and diglycerides) – an emulsifier used primarily in baking
*
Proteins – those with both hydrophilic and hydrophobic regions, e.g. sodium
caseinate, as in meltable
cheese product
Processed cheese (also known as process cheese, cheese food, prepared cheese, cheese product, or plastic cheese) is a food product made from cheese and unfermented dairy ingredients mixed with emulsifiers. Additional ingredients, such as vege ...
In food emulsions, the type of emulsifier greatly affects how emulsions are structured in the stomach and how accessible the oil is for gastric
lipases
Lipase ( ) is a family of enzymes that catalyzes the hydrolysis of fats. Some lipases display broad substrate scope including esters of cholesterol, phospholipids, and of lipid-soluble vitamins and sphingomyelinases; however, these are usually tr ...
, thereby influencing how fast emulsions are digested and trigger a
satiety inducing
hormone
A hormone (from the Greek participle , "setting in motion") is a class of signaling molecules in multicellular organisms that are sent to distant organs by complex biological processes to regulate physiology and behavior. Hormones are required ...
response.
Detergents are another class of surfactant, and will interact physically with both
oil
An oil is any nonpolar chemical substance that is composed primarily of hydrocarbons and is hydrophobic (does not mix with water) & lipophilic (mixes with other oils). Oils are usually flammable and surface active. Most oils are unsaturated ...
and
water
Water (chemical formula ) is an inorganic, transparent, tasteless, odorless, and nearly colorless chemical substance, which is the main constituent of Earth's hydrosphere and the fluids of all known living organisms (in which it acts as a ...
, thus stabilizing the interface between the oil and water droplets in suspension. This principle is exploited in
soap
Soap is a salt of a fatty acid used in a variety of cleansing and lubricating products. In a domestic setting, soaps are surfactants usually used for washing, bathing, and other types of housekeeping. In industrial settings, soaps are use ...
, to remove
grease for the purpose of
cleaning
Cleaning is the process of removing unwanted substances, such as dirt, infectious agents, and other impurities, from an object or environment. Cleaning is often performed for aesthetic, hygienic, functional, environmental, or safety purposes ...
. Many different emulsifiers are used in
pharmacy
Pharmacy is the science and practice of discovering, producing, preparing, dispensing, reviewing and monitoring medications, aiming to ensure the safe, effective, and affordable use of medicines. It is a miscellaneous science as it links heal ...
to prepare emulsions such as
creams and
lotion
Lotion is a low-viscosity topical preparation intended for application to the skin. By contrast, creams and gels have higher viscosity, typically due to lower water content. Lotions are applied to external skin with bare hands, a brush, a clean ...
s. Common examples include
emulsifying wax Emulsifying wax is a cosmetic emulsifying ingredient. The ingredient name is often followed by the initials NF, indicating that it conforms to the specifications of the National Formulary.
Emulsifying wax is created when a wax material (either a ...
,
polysorbate 20
Polysorbate 20 (common commercial brand names include Kolliphor PS 20, Scattics, Alkest TW 20, Tween 20, and Kotilen-20) is a polysorbate-type nonionic surfactant formed by the ethoxylation of sorbitan monolaurate. Its stability and relative n ...
, and
ceteareth 20.
Sometimes the inner phase itself can act as an emulsifier, and the result is a nanoemulsion, where the inner state disperses into "
nano-
Nano (symbol n) is a unit prefix meaning "one billionth". Used primarily with the metric system, this prefix denotes a factor of 10−9 or . It is frequently encountered in science and electronics for prefixing units of time and length.
;Exam ...
size" droplets within the outer phase. A well-known example of this phenomenon, the "
ouzo effect
The ouzo effect (also louche effect and spontaneous emulsification) is a milky ('' louche'') oil-in-water emulsion that is formed when water is added to ouzo and other anise-flavored liqueurs and spirits, such as pastis, rakı, arak, sambuca a ...
", happens when water is poured into a strong alcoholic
anise
Anise (; '), also called aniseed or rarely anix is a flowering plant in the family Apiaceae native to Eurasia.
The flavor and aroma of its seeds have similarities with some other spices and herbs, such as star anise, fennel, licorice, and ta ...
-based beverage, such as
ouzo
Ouzo ( el, ούζο, ) is a dry anise-flavored aperitif that is widely consumed in Greece. It is made from rectified spirits that have undergone a process of distillation and flavoring. Its taste is similar to other anise liquors like pastis, ...
,
pastis
Pastis (; oc, Pastís, ; or ) is an anise-flavoured spirit and apéritif traditionally from France, typically containing less than 100 g/L sugar and 40–45% ABV ( alcohol by volume).
Origins
Pastis was first commercialized by Paul Ricard ...
,
absinthe,
arak, or
raki. The anisolic compounds, which are soluble in
ethanol
Ethanol (abbr. EtOH; also called ethyl alcohol, grain alcohol, drinking alcohol, or simply alcohol) is an organic compound. It is an Alcohol (chemistry), alcohol with the chemical formula . Its formula can be also written as or (an ethyl ...
, then form nano-size droplets and emulsify within the water. The resulting color of the drink is opaque and milky white.
Mechanisms of emulsification
A number of different chemical and physical processes and mechanisms can be involved in the process of emulsification:
* Surface tension theory – according to this theory, emulsification takes place by reduction of interfacial tension between two phases
* Repulsion theory – According to this theory, the emulsifier creates a film over one phase that forms globules, which repel each other. This repulsive force causes them to remain suspended in the dispersion medium
* Viscosity modification – emulgents like
acacia
''Acacia'', commonly known as the wattles or acacias, is a large genus of shrubs and trees in the subfamily Mimosoideae of the pea family Fabaceae. Initially, it comprised a group of plant species native to Africa and Australasia. The genus na ...
and
tragacanth
Tragacanth is a natural gum obtained from the dried sap of several species of Middle Eastern legumes of the genus ''Astragalus'', including '' A. adscendens'', '' A. gummifer'', '' A. brachycalyx'', and '' A. tragacantha''. Some of these specie ...
, which are hydrocolloids, as well as PEG (
polyethylene glycol
Polyethylene glycol (PEG; ) is a polyether compound derived from petroleum with many applications, from industrial manufacturing to medicine. PEG is also known as polyethylene oxide (PEO) or polyoxyethylene (POE), depending on its molecular we ...
), glycerine, and other polymers like CMC (
carboxymethyl cellulose
Carboxymethyl cellulose (CMC) or cellulose gum is a cellulose derivative with carboxymethyl groups (-CH2-COOH) bound to some of the hydroxyl groups of the glucopyranose monomers that make up the cellulose backbone. It is often used as its sodi ...
), all increase the viscosity of the medium, which helps create and maintain the suspension of globules of dispersed phase
Uses
In food
![Ingredients maonesa](https://upload.wikimedia.org/wikipedia/commons/3/35/Ingredients_maonesa.jpg)
Oil-in-water emulsions are common in food products:
*
Mayonnaise and
Hollandaise sauce
Hollandaise sauce ( or ; ), also called Dutch sauce, is a mixture of egg yolk, melted butter, and lemon juice (or a white wine or vinegar reduction). It is usually seasoned with salt, and either white pepper or cayenne pepper.
It is well kn ...
s – these are oil-in-water emulsions stabilized with egg yolk
lecithin, or with other types of food additives, such as
sodium stearoyl lactylate
Sodium stearoyl-2-lactylate (sodium stearoyl lactylate or SSL) is a versatile, FDA approved food additive used to improve the mix tolerance and volume of processed foods. It is one type of a commercially available lactylate. SSL is non-toxic, ...
*
Homogenized milk
Milk is a white liquid food produced by the mammary glands of mammals. It is the primary source of nutrition for young mammals (including breastfed human infants) before they are able to digest solid food. Immune factors and immune-modulating ...
– an emulsion of milk fat in water, with milk proteins as the emulsifier
*
Vinaigrette
Vinaigrette ( , ) is made by mixing an oil with a mild acid such as vinegar or lemon juice (citric acid). The mixture can be enhanced with salt, herbs and/or spices. It is used most commonly as a salad dressing, but can also be used as a marina ...
– an emulsion of vegetable oil in vinegar, if this is prepared using only oil and vinegar (i.e., without an emulsifier), an unstable emulsion results
Water-in-oil emulsions are less common in food, but still exist:
*
Butter
Butter is a dairy product made from the fat and protein components of churned cream. It is a semi-solid emulsion at room temperature, consisting of approximately 80% butterfat. It is used at room temperature as a spread, melted as a condimen ...
– an emulsion of water in butterfat
*
Margarine
Other foods can be turned into products similar to emulsions, for example
meat emulsion Meat emulsion is a two-phase system, with the dispersed phase consisting of either solid or liquid fat particles and the continuous phase being the water containing salts and dissolved, gelled and suspended proteins. Thus, they can be classified as ...
is a suspension of meat in liquid that is similar to true emulsions.
In health care
In
pharmaceutics,
hairstyling
A hairstyle, hairdo, haircut or coiffure refers to the styling of hair, usually on the human scalp. Sometimes, this could also mean an editing of facial or body hair. The fashioning of hair can be considered an aspect of personal groomin ...
,
personal hygiene
Hygiene is a series of practices performed to preserve health.
According to the World Health Organization (WHO), "Hygiene refers to conditions and practices that help to maintain health and prevent the spread of diseases." Personal hygiene refer ...
, and
cosmetics
Cosmetics are constituted mixtures of chemical compounds derived from either natural sources, or synthetically created ones. Cosmetics have various purposes. Those designed for personal care and skin care can be used to cleanse or protect ...
, emulsions are frequently used. These are usually oil and water emulsions but dispersed, and which is continuous depends in many cases on the
pharmaceutical formulation
Pharmaceutical formulation, in pharmaceutics, is the process in which different chemical substances, including the active drug, are combined to produce a final medicinal product. The word ''formulation'' is often used in a way that includes dosage ...
. These emulsions may be called
cream
Cream is a dairy product composed of the higher-fat layer skimmed from the top of milk before homogenization. In un-homogenized milk, the fat, which is less dense, eventually rises to the top. In the industrial production of cream, this process ...
s,
ointments,
liniments (balms),
pastes,
film
A film also called a movie, motion picture, moving picture, picture, photoplay or (slang) flick is a work of visual art that simulates experiences and otherwise communicates ideas, stories, perceptions, feelings, beauty, or atmosphere ...
s, or
liquid
A liquid is a nearly incompressible fluid that conforms to the shape of its container but retains a (nearly) constant volume independent of pressure. As such, it is one of the four fundamental states of matter (the others being solid, gas, a ...
s, depending mostly on their oil-to-water ratios, other additives, and their intended
route of administration.
The first 5 are
topical
A topical medication is a medication that is applied to a particular place on or in the body. Most often topical medication means application to body surfaces such as the skin or mucous membranes to treat ailments via a large range of classes ...
dosage form
Dosage forms (also called unit doses) are pharmaceutical drug products in the form in which they are marketed for use, with a specific mixture of active ingredients and inactive components (excipients), in a particular configuration (such as a ca ...
s, and may be used on the surface of the
skin
Skin is the layer of usually soft, flexible outer tissue covering the body of a vertebrate animal, with three main functions: protection, regulation, and sensation.
Other cuticle, animal coverings, such as the arthropod exoskeleton, have diffe ...
,
transdermal
Transdermal is a route of administration wherein active ingredients are delivered across the skin for systemic distribution. Examples include transdermal patches used for medicine delivery.
The drug is administered in the form of a patch or ointme ...
ly,
ophthalmically,
rectal
The rectum is the final straight portion of the large intestine in humans and some other mammals, and the gut in others. The adult human rectum is about long, and begins at the rectosigmoid junction (the end of the sigmoid colon) at the le ...
ly, or
vagina
In mammals, the vagina is the elastic, muscular part of the female genital tract. In humans, it extends from the vestibule to the cervix. The outer vaginal opening is normally partly covered by a thin layer of mucosal tissue called the hymen ...
lly. A highly liquid emulsion may also be used
oral
The word oral may refer to:
Relating to the mouth
* Relating to the mouth, the first portion of the alimentary canal that primarily receives food and liquid
**Oral administration of medicines
** Oral examination (also known as an oral exam or or ...
ly, or may be
injected in some cases.
Microemulsions are used to deliver
vaccine
A vaccine is a biological Dosage form, preparation that provides active acquired immunity to a particular infectious disease, infectious or cancer, malignant disease. The safety and effectiveness of vaccines has been widely studied and verifie ...
s and kill
microbe
A microorganism, or microbe,, ''mikros'', "small") and ''organism'' from the el, ὀργανισμός, ''organismós'', "organism"). It is usually written as a single word but is sometimes hyphenated (''micro-organism''), especially in olde ...
s. Typical emulsions used in these techniques are nanoemulsions of
soybean oil
Soybean oil (British English: soyabean oil) is a vegetable oil extracted from the seeds of the soybean (''Glycine max''). It is one of the most widely consumed cooking oils and the second most consumed vegetable oil. As a drying oil, processed s ...
, with particles that are 400–600 nm in diameter. The process is not chemical, as with other types of
antimicrobial
An antimicrobial is an agent that kills microorganisms or stops their growth. Antimicrobial medicines can be grouped according to the microorganisms they act primarily against. For example, antibiotics are used against bacteria, and antifungals ar ...
treatments, but mechanical. The smaller the droplet the greater the
surface tension and thus the greater the force required to merge with other
lipids
Lipids are a broad group of naturally-occurring molecules which includes fats, waxes, sterols, fat-soluble vitamins (such as vitamins A, D, E and K), monoglycerides, diglycerides, phospholipids, and others. The functions of lipids include ...
. The oil is emulsified with detergents using a
high-shear mixer
A high-shear mixer disperses, or transports, one phase or ingredient (liquid, solid, gas) into a main continuous phase (liquid), with which it would normally be immiscible. A rotor or impeller, together with a stationary component known as a stat ...
to stabilize the emulsion so, when they encounter the lipids in the
cell membrane
The cell membrane (also known as the plasma membrane (PM) or cytoplasmic membrane, and historically referred to as the plasmalemma) is a biological membrane that separates and protects the interior of all cells from the outside environment ( ...
or envelope of
bacteria
Bacteria (; singular: bacterium) are ubiquitous, mostly free-living organisms often consisting of one biological cell. They constitute a large domain of prokaryotic microorganisms. Typically a few micrometres in length, bacteria were among ...
or
virus
A virus is a submicroscopic infectious agent that replicates only inside the living cells of an organism. Viruses infect all life forms, from animals and plants to microorganisms, including bacteria and archaea.
Since Dmitri Ivanovsky's 1 ...
es, they force the lipids to merge with themselves. On a mass scale, in effect this disintegrates the membrane and kills the pathogen. The soybean oil emulsion does not harm normal human cells, or the cells of most other
higher organisms, with the exceptions of
sperm cells
A spermatozoon (; also spelled spermatozoön; ; ) is a motile sperm cell, or moving form of the haploid cell that is the male gamete. A spermatozoon joins an ovum to form a zygote. (A zygote is a single cell, with a complete set of chromosomes, ...
and
blood cells
A blood cell, also called a hematopoietic cell, hemocyte, or hematocyte, is a cell produced through hematopoiesis and found mainly in the blood. Major types of blood cells include red blood cells (erythrocytes), white blood cells (leukocytes), a ...
, which are vulnerable to nanoemulsions due to the peculiarities of their membrane structures. For this reason, these nanoemulsions are not currently used
intravenously (IV). The most effective application of this type of nanoemulsion is for the
disinfection
A disinfectant is a chemical substance or compound used to inactivate or destroy microorganisms on inert surfaces. Disinfection does not necessarily kill all microorganisms, especially resistant bacterial spores; it is less effective than st ...
of surfaces. Some types of nanoemulsions have been shown to effectively destroy
HIV-1
The subtypes of HIV include two major types, HIV type 1 (HIV-1) and HIV type 2 (HIV-2). HIV-1 is related to viruses found in chimpanzees and gorillas living in western Africa, while HIV-2 viruses are related to viruses found in the sooty mangabey ...
and
tuberculosis
Tuberculosis (TB) is an infectious disease usually caused by '' Mycobacterium tuberculosis'' (MTB) bacteria. Tuberculosis generally affects the lungs, but it can also affect other parts of the body. Most infections show no symptoms, in ...
pathogens on non-
porous
Porosity or void fraction is a measure of the void (i.e. "empty") spaces in a material, and is a fraction of the volume of voids over the total volume, between 0 and 1, or as a percentage between 0% and 100%. Strictly speaking, some tests measure ...
surfaces.
In firefighting
Emulsifying agents are effective at extinguishing fires on small, thin-layer spills of flammable liquids (
class B fire
In fire classes, a Class B fire is a fire in flammable liquids or flammable gases, petroleum greases, tars, oils, oil-based paints, solvents, lacquers, or alcohols. For example, propane, natural gas, gasoline and kerosene fires are types of Cl ...
s). Such agents encapsulate the fuel in a fuel-water emulsion, thereby trapping the flammable vapors in the water phase. This emulsion is achieved by applying an
aqueous
An aqueous solution is a solution in which the solvent is water. It is mostly shown in chemical equations by appending (aq) to the relevant chemical formula. For example, a solution of table salt, or sodium chloride (NaCl), in water would be re ...
surfactant solution to the fuel through a high-pressure nozzle. Emulsifiers are not effective at extinguishing large fires involving bulk/deep liquid fuels, because the amount of emulsifier agent needed for extinguishment is a function of the volume of the fuel, whereas other agents such as
aqueous film-forming foam need cover only the surface of the fuel to achieve vapor mitigation.
Chemical synthesis
Emulsions are used to manufacture polymer dispersions – polymer production in an emulsion 'phase' has a number of process advantages, including prevention of coagulation of product. Products produced by such polymerisations may be used as the emulsions – products including primary components for glues and paints. Synthetic
latex
Latex is an emulsion (stable dispersion) of polymer microparticles in water. Latexes are found in nature, but synthetic latexes are common as well.
In nature, latex is found as a milky fluid found in 10% of all flowering plants (angiosperms ...
es (rubbers) are also produced by this process.
See also
*
Emulsion dispersion
An emulsion dispersion is thermoplastics or elastomers suspended in a liquid state by means of emulsifiers.
Preparation
Emulsions are thermodynamically unstable liquid/liquid dispersions that are stabilized.
Emulsion dispersion is not about reac ...
*
Emulsified fuel Emulsified Fuels are emulsions composed of water and a combustible liquid, either oil or a fuel. Emulsions are a particular example of a dispersion comprising a continuous and a dispersed phase. The most commonly used emulsion fuel is water-in-diese ...
*
Homogenizer A homogenizer is a piece of laboratory or industrial equipment used for the homogenization of various types of material, such as tissue, plant, food, soil, and many others. Many different models have been developed using various physical technologie ...
*
Liquid whistle A liquid whistle is a static mixer which passes fluid at high pressure through an orifice and over a blade. This subjects the fluid to high turbulence
In fluid dynamics, turbulence or turbulent flow is fluid motion characterized by chaotic change ...
*
Miniemulsion
A miniemulsion (also known as nanoemulsion) is a special type of emulsion. A miniemulsion is obtained by shearing a mixture comprising two immiscible liquid phases (for example, oil and water), one or more surfactants and, possibly, one or more co ...
*
Pickering emulsion
A Pickering emulsion is an emulsion that is stabilized by solid particles (for example colloidal silica) which adsorb onto the interface between the water and oil phases. Typically, the emulsions are either water-in-oil or oil-in-water emulsions, ...
*
Rheology
Rheology (; ) is the study of the flow of matter, primarily in a fluid (liquid or gas) state, but also as "soft solids" or solids under conditions in which they respond with Plasticity (physics), plastic flow rather than deforming Elasticity (phy ...
*
Water-in-water emulsion
Water-in-water (W/W) emulsion is a system that consists of droplets of water-solvated molecules in another continuous aqueous solution; both the droplet and continuous phases contain different molecules that are entirely water-soluble. As such, whe ...
References
Other sources
*
* ''Handbook of Nanostructured Materials and Nanotechnology; Nalwa, H.S., Ed.; Academic Press: New York, NY, USA, 2000; Volume 5, pp. 501–575''
{{Authority control
Chemical mixtures
Colloidal chemistry
Colloids
Dosage forms
Drug delivery devices
Soft matter