Chrysler ESX-3
   HOME

TheInfoList



OR:

The Dodge Intrepid ESX prototype cars are the result of the 1993 response by the
Chrysler Corporation Stellantis North America (officially FCA US and formerly Chrysler ()) is one of the " Big Three" automobile manufacturers in the United States, headquartered in Auburn Hills, Michigan. It is the American subsidiary of the multinational automoti ...
to a challenge by
U.S. President The president of the United States (POTUS) is the head of state and head of government of the United States of America. The president directs the executive branch of the federal government and is the commander-in-chief of the United States ...
Bill Clinton William Jefferson Clinton ( né Blythe III; born August 19, 1946) is an American politician who served as the 42nd president of the United States from 1993 to 2001. He previously served as governor of Arkansas from 1979 to 1981 and agai ...
to produce a vehicle which was capable of meeting the demands of the modern consumer, while still achieving an unprecedented overall in fuel economy. The
PNGV The Partnership for a New Generation of Vehicles was a co-operative research program between the US government and the three major domestic auto corporations that was aimed at bringing extremely fuel-efficient (up to vehicles to market by 2003. ...
- Partnership for a New Generation of Vehicles project was aimed at The Big Three American car manufacturers.


ESX I (1996)

The first attempt made by Chrysler at exceeding 80 mpg was designated the Intrepid ESX. The ESX I, although a
series hybrid Hybrid vehicle drivetrains transmit power to the driving wheels for hybrid vehicles. A hybrid vehicle has multiple forms of motive power. Hybrids come in many configurations. For example, a hybrid may receive its energy by burning gasoline, but sw ...
, used what might be considered "conventional technology". Chrysler invested an estimated US$3 million into the project, which used exotic materials in its construction. The ESX was designed by
Bob Boniface Bob Boniface is an American automobile and industrial designer who has worked for Chrysler and General Motors. Background Born in Youngstown, Ohio into a family of eight children, Boniface began drawing cars at the age of four. Education B ...
, who went on the design the 1998 production
Dodge Intrepid The Dodge Intrepid is a full sized front-wheel drive four-door sedan that was produced by Dodge for model years 1993 to 2004. It is related to the Chrysler 300M, Chrysler Concorde, Chrysler LHS, Chrysler New Yorker, and Eagle Vision which we ...
. The engine was derived from a series hybrid-drive propulsion system meant to use 40% of gasoline's potential energy while at optimum RPM (the typical car only uses 15% of gasoline's potential energy due to wide ranges of RPMs). The car was powered by a
VM Motori VM Motori S.p.A. is an Italian diesel engine manufacturing company which is wholly owned by Stellantis. VM headquarters and main production facilities are located in Cento, in Emilia-Romagna, Italy. History VM Motori was founded by two entre ...
1.8 L three-cylinder turbocharged diesel, whose energy was diverted to a , 300 V TMFI was the Test and Verification Lab Manager at Bolder Technologies battery developed by Bolder Technologies in Golden, Colorado and two oil-cooled electric
wheel motor The wheel hub motor (also called wheel motor, wheel hub drive, hub motor or in-wheel motor) is an electric motor that is incorporated into the hub of a wheel and drives it directly. History * First wheel motor concept: Wellington Adams of ...
s. The electric motors were also part of the
regenerative braking Regenerative braking is an energy recovery mechanism that slows down a moving vehicle or object by converting its kinetic energy into a form that can be either used immediately or stored until needed. In this mechanism, the electric traction mo ...
system, where energy normally lost through the disc brakes recharged the batteries.


ESX II (1998)

The second series in the ESX line completed testing in 1998, and made several improvements on its predecessor. The ESX II was dubbed a "mybrid" (mild hybrid) because its reliance on electrical power was not highly dependent on the battery. This system contained two motors that worked in parallel: a 1.5 L 74 bhp direct-injection diesel and a 20 bhp AC-induction electric motor. Coupled with the powertrains were a 5-speed electronically shifted manual transmission, a nickel-metal hydride battery pack, and controlling equipment which included components from the Patriot hybrid race-car program. The main power came from the diesel engine. The electric motor charged the batteries, added to the acceleration, and powered the reverse gear. To cut down on cost and weight, Chrysler fit the car with an unpainted thermoplastic body attached to an aluminum frame. The shape had low
aerodynamic drag In fluid dynamics, drag (sometimes called air resistance, a type of friction, or fluid resistance, another type of friction or fluid friction) is a force acting opposite to the relative motion of any object moving with respect to a surrounding fl ...
. Inside, trim was constructed of
carbon fiber Carbon fiber-reinforced polymers (American English), carbon-fibre-reinforced polymers (Commonwealth English), carbon-fiber-reinforced plastics, carbon-fiber reinforced-thermoplastic (CFRP, CRP, CFRTP), also known as carbon fiber, carbon compo ...
and the seats were constructed from tube frame. The final cost: only $15,000 more than a regular Intrepid, or about $37,000.


ESX III (2003)

The ESX III progress in
fuel efficiency Fuel efficiency is a form of thermal efficiency, meaning the ratio of effort to result of a process that converts chemical potential energy contained in a carrier (fuel) into kinetic energy or work. Overall fuel efficiency may vary per device, wh ...
and costs stem from several major improvements in technology: The ESX3's
mild hybrid Mild hybrids (also known as power-assist hybrids, battery-assisted hybrid vehicles or BAHVs) are generally cars with an internal combustion engine equipped with an electric machine (one motor/generator in a parallel hybrid configuration) allowing t ...
electric (or "mybrid") powertrain combines an efficient diesel engine, an electric motor and a
lithium-ion battery A lithium-ion or Li-ion battery is a type of rechargeable battery which uses the reversible reduction of lithium ions to store energy. It is the predominant battery type used in portable consumer electronics and electric vehicles. It also se ...
to achieve an average 72 miles per gallon (3.3 liters/100 km) fuel efficiency (gasoline equivalent). That is two miles per gallon better than the fuel efficiency of its predecessor, the ESX2 in 1998, and close to PNGV's goal of . An electro-mechanical automatic transmission (EMAT) developed by
DaimlerChrysler The Mercedes-Benz Group AG (previously named Daimler-Benz, DaimlerChrysler and Daimler) is a German multinational automotive corporation headquartered in Stuttgart, Baden-Württemberg, Germany. It is one of the world's leading car manufacture ...
engineers provides the fuel efficiency of a manual transmission with the convenience of an automatic. The lightweight body uses injection-molded thermoplastics to achieve significant improvements in weight and cost. The ESX3 weighs in at just 2,250 pounds (1020 kg) while meeting all federal safety standards and providing the roominess and comfort of today's family sedan. The entire vehicle is more than 80 percent recyclable. A total rethinking of the car's electronic and electrical systems cut several pounds from the weight of electronics while providing driver controls, vehicle monitoring and diagnostic indicators, audio and video systems, and a telemetrics package. There are no plans to produce any of the ESX series of vehicles; the Intrepid nameplate has been retired, and Dodge has no immediate plans to produce a hybrid sedan.


References


External links


Hybrid-Car.org

ConceptCarz.com
{{DEFAULTSORT:Dodge Intrepid Esx Intrepid ESX Hybrid electric cars