The Cessna CitationJet/CJ/M2 (also known as the Model 525) are a series of light
business jet
A business jet, private jet, or bizjet is a jet aircraft designed for transporting small groups of people. Business jets may be adapted for other roles, such as the evacuation of casualties or express parcel deliveries, and some are used by pub ...
s built by
Cessna
Cessna () is an American brand of general aviation aircraft owned by Textron Aviation since 2014, headquartered in Wichita, Kansas. Originally, it was a brand of the Cessna Aircraft Company, an American general aviation aircraft manufacturing c ...
, and are part of the
Citation family
The Cessna Citation is a family of business jets by Cessna that started in 1972 with the entry into service of the first model. In the fifty years following the 1969 first flight, more than 7,500 Citations were delivered, forming the largest b ...
.
Launched in October 1989, the first flight of the Model 525 was on April 29, 1991. Federal Aviation Administration
The Federal Aviation Administration (FAA) is the largest transportation agency of the U.S. government and regulates all aspects of civil aviation in the country as well as over surrounding international waters. Its powers include air traffic m ...
(FAA) certification was awarded on October 16, 1992, and the first aircraft was delivered on March 30, 1993.
The CJ series are powered by two Williams FJ44
The Williams FJ44 is a family of small, two-spool, turbofan engines produced by Williams International for the light business jet market. Until the recent boom in the very light jet market, the FJ44 was one of the smallest turbofans available ...
engines; the design uses the Citation II
A citation is a reference to a source. More precisely, a citation is an abbreviated alphanumeric expression embedded in the body of an intellectual work that denotes an entry in the bibliographic references section of the work for the purpose of ...
's forward fuselage with a new carry-through section wing and a T-tail
A T-tail is an empennage configuration in which the tailplane is mounted to the top of the fin. The arrangement looks like the capital letter T, hence the name. The T-tail differs from the standard configuration in which the tailplane is ...
.
The original CitationJet model has been updated into the CJ1/CJ1+/M2 variants; additionally, the CJ1 was stretched into the CJ2/CJ2+ which was built between 2000 and 2016. The design was then further developed into the CJ3/CJ3+, built from December 2004 to present, and finally into the CJ4 which has been built since 2010. By June 2017, 2,000 of all variants had been delivered.
Development
Development of the CitationJet was prompted by the 1985 discontinuation of the Citation I
The Cessna 500 Citation I is a small business jet produced by Cessna, the basis of the Citation family.
The Fanjet 500 prototype was announced in October 1968, first flew on September 15, 1969, and was certified as the 500 Citation on September ...
, a reaction to the increasing price of its Pratt & Whitney JT15D-1 engines, which rendered it uncompetitive with its larger straight wing
The wing configuration of a fixed-wing aircraft (including both gliders and powered aeroplanes) is its arrangement of lifting and related surfaces.
Aircraft designs are often classified by their wing configuration. For example, the Supermarin ...
Citation stablemates. Cessna believed that a substantial market still existed for a light 4-5 passenger jet with low operating costs, docile flying qualities, and the ability to operate from short runways usable by light piston
A piston is a component of reciprocating engines, reciprocating pumps, gas compressors, hydraulic cylinders and pneumatic cylinders, among other similar mechanisms. It is the moving component that is contained by a cylinder and is made gas-tig ...
twins, a formula that had made the Citation I successful. However, that aircraft had been stigmatized for its slower cruise speed than its competitors, which had progressively been addressed in the Citation S/II and Bravo and the Citation V, Ultra and Encore, but at the cost of operating economy. To offer increased speed with reduced purchase and operating costs, Cessna engineers realized that a new, lighter airframe design would be needed, using less expensive and lower-thrust engines. To better compete with newer jets, Cessna also wanted to eliminate the step in the center aisle of the earlier Citations, created by the spar
SPAR, originally DESPAR, styled as DE SPAR, is a Dutch multinational that provides branding, supplies and support services for independently owned and operated food retail stores. It was founded in the Netherlands in 1932, by Adriaan van Well, ...
passing through the cabin.
Cessna launched the $2.4 million (equivalent to $ million in ) model 525 CitationJet at the October 1989 NBAA convention in Atlanta, estimating a demand for 1,000 aircraft over ten years.
Succeeding the 700 original Citation I
The Cessna 500 Citation I is a small business jet produced by Cessna, the basis of the Citation family.
The Fanjet 500 prototype was announced in October 1968, first flew on September 15, 1969, and was certified as the 500 Citation on September ...
s produced since 1972, first flight was scheduled for spring 1991, Federal Aviation Administration
The Federal Aviation Administration (FAA) is the largest transportation agency of the U.S. government and regulates all aspects of civil aviation in the country as well as over surrounding international waters. Its powers include air traffic m ...
(FAA) certification in October 1992 and deliveries by the end of the year.
Its first flight was on April 29, 1991, FAA certification was awarded on October 16, 1992, and first delivery happened on March 30, 1993. The aircraft met its initial design goal: its normal cruise speed was faster than that of the Citation I, and it outperformed that aircraft in all other significant metrics except maximum payload and approach noise, despite having less total engine thrust. Twenty years after its first flight, 1,450 CJs had been produced.
As of June 2017, 2,000 of all variants had been delivered, with five million hours flown.
Design
The six-seat CitationJet is a monoplane
A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple planes.
A monoplane has inherently the highest efficiency and lowest drag of any wing confi ...
with a cantilever wing
A cantilever is a rigid structural element that extends horizontally and is supported at only one end. Typically it extends from a flat vertical surface such as a wall, to which it must be firmly attached. Like other structural elements, a cant ...
, a retractable tricycle landing gear
Tricycle gear is a type of aircraft undercarriage, or ''landing gear'', arranged in a tricycle fashion. The tricycle arrangement has a single nose wheel in the front, and two or more main wheels slightly aft of the center of gravity. Tricycle g ...
and a pressurized cabin
Cabin pressurization is a process in which conditioned air is pumped into the cabin of an aircraft or spacecraft in order to create a safe and comfortable environment for passengers and crew flying at high altitudes. For aircraft, this air is ...
.
The jet uses the Citation II's forward fuselage, a new carry-through section, a new laminar flow
In fluid dynamics, laminar flow is characterized by fluid particles following smooth paths in layers, with each layer moving smoothly past the adjacent layers with little or no mixing. At low velocities, the fluid tends to flow without lateral mi ...
, supercritical wing developed with NASA
The National Aeronautics and Space Administration (NASA ) is an independent agency of the US federal government responsible for the civil space program, aeronautics research, and space research.
NASA was established in 1958, succeeding t ...
and Boeing
The Boeing Company () is an American multinational corporation that designs, manufactures, and sells airplanes, rotorcraft, rockets, satellites, telecommunications equipment, and missiles worldwide. The company also provides leasing and product ...
, and a T-tail
A T-tail is an empennage configuration in which the tailplane is mounted to the top of the fin. The arrangement looks like the capital letter T, hence the name. The T-tail differs from the standard configuration in which the tailplane is ...
.
Powered by two Williams FJ44
The Williams FJ44 is a family of small, two-spool, turbofan engines produced by Williams International for the light business jet market. Until the recent boom in the very light jet market, the FJ44 was one of the smallest turbofans available ...
s, the aircraft has a trailing link
A (semi) trailing-arm suspension, sometimes referred to as (semi) trailing-link is a vehicle axle or wheel suspension design in which one or more horizontal arms (or "links"), perpendicular to and forward of the axle, are connecting the axle or w ...
undercarriage for smooth landings, and can be flown by a single pilot.
Range is with four passengers and it can cruise at .[
The CitationJet retains the inside diameter, circular fuselage cross-section of the Citation I and II, a ]semi-monocoque
The term semi-monocoque or semimonocoque refers to a stressed shell structure that is similar to a true monocoque, but which derives at least some of its strength from conventional reinforcement. Semi-monocoque construction is used for, among ot ...
construction of conventional aluminum alloys assembled with rivet
A rivet is a permanent mechanical fastener. Before being installed, a rivet consists of a smooth cylindrical shaft with a head on one end. The end opposite to the head is called the ''tail''. On installation, the rivet is placed in a punched ...
s, fastener
A fastener (US English) or fastening (UK English) is a hardware device that mechanically joins or affixes two or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that can be removed or disman ...
s and adhesive bonding
Adhesive bonding is a joining technique used in the manufacture and repair of a wide range of products. Along with welding and soldering, adhesive bonding is one of the basic joining processes. In this technique, components are bonded together usi ...
.
To reduce interference drag
Interference is the act of interfering, invading, or poaching. Interference may also refer to:
Communications
* Interference (communication), anything which alters, modifies, or disrupts a message
* Adjacent-channel interference, caused by extra ...
, a large fairing encases the low wing
A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple planes.
A monoplane has inherently the highest efficiency and lowest drag of any wing confi ...
center section, and the engines are mounted high on the tail. Composite material
A composite material (also called a composition material or shortened to composite, which is the common name) is a material which is produced from two or more constituent materials. These constituent materials have notably dissimilar chemical or ...
s save weight in non-load-bearing components including fairings and the nose radome
A radome (a portmanteau of radar and dome) is a structural, weatherproof enclosure that protects a radar antenna (radio), antenna. The radome is constructed of material transparent to radio waves. Radomes protect the antenna from weather and ...
.[ The cockpit features EFIS avionics; fuselage length is reduced 11 inches (27 cm) compared to the Citation I, and cabin length is reduced by , but with a lowered center aisle for increased cabin height.][ The cockpit side windows are slightly smaller than those on earlier Citations to lessen interior temperature differences between the cockpit and the main cabin.
Wing structure is a conventional ladder with chord-wise ]ribs
The rib cage, as an enclosure that comprises the ribs, vertebral column and sternum in the thorax of most vertebrates, protects vital organs such as the heart, lungs and great vessels.
The sternum, together known as the thoracic cage, is a semi- ...
over front and rear spars, and an aft sub spar to support the landing gear.
The NASA high-speed 0213 airfoil
An airfoil (American English) or aerofoil (British English) is the cross-sectional shape of an object whose motion through a gas is capable of generating significant lift, such as a wing, a sail, or the blades of propeller, rotor, or turbine.
...
sustains natural laminar flow
In fluid dynamics, laminar flow is characterized by fluid particles following smooth paths in layers, with each layer moving smoothly past the adjacent layers with little or no mixing. At low velocities, the fluid tends to flow without lateral mi ...
over 30% of the upper surface for 10-15% better lift-to-drag ratio
In aerodynamics, the lift-to-drag ratio (or L/D ratio) is the lift generated by an aerodynamic body such as an aerofoil or aircraft, divided by the aerodynamic drag caused by moving through air. It describes the aerodynamic efficiency under give ...
than the larger NACA 23000-series wing of the Citation I.[ To maintain the wing's laminar-flow qualities and reduce weight, icing protection is provided by ducted ]bleed air
Bleed air is compressed air taken from the compressor stage of a gas turbine upstream of its fuel-burning sections. Automatic air supply and cabin pressure controller (ASCPCs) valves bleed air from high or low stage engine compressor sections. Low ...
rather than the deicing boot
A deicing boot is a type of ice protection system installed on aircraft surfaces to permit a mechanical deicing in flight. Such boots are generally installed on the leading edges of wings and control surfaces (e.g. horizontal and vertical sta ...
s or fluid deicing systems used on earlier Citations.
Its FJ44 engine has a 16:1 overall pressure ratio
In aeronautical engineering, overall pressure ratio, or overall compression ratio, is the ratio of the stagnation pressure as measured at the front and rear of the compressor of a gas turbine engine. The terms ''compression ratio'' and ''pressure ...
and a 2.58:1 bypass ratio
The bypass ratio (BPR) of a turbofan engine is the ratio between the mass flow rate of the bypass stream to the mass flow rate entering the core. A 10:1 bypass ratio, for example, means that 10 kg of air passes through the bypass duct for ev ...
.[ Early CitationJet models have a novel design feature to reduce weight: rather than conventional ]thrust reverser
Thrust reversal, also called reverse thrust, is the temporary diversion of an aircraft engine's thrust for it to act against the forward travel of the aircraft, providing deceleration. Thrust reverser systems are featured on many jet aircraft ...
s, the aircraft are equipped with thrust attenuator paddles that pivot from the rear fuselage, similar to those used on the Cessna T-37 Tweet
The Cessna T-37 Tweet (designated Model 318 by Cessna) is a small, economical twin-engined jet trainer type which flew for decades as a primary trainer for the United States Air Force (USAF) and in the air forces of several other nations. The T ...
military trainer.
Variants
Model 525
;CitationJet
:Model 525 serial numbers 0001 to 0359, powered by Williams FJ44-1A turbofans, are marketed as the CitationJet. With Tamarack winglets, it burns of fuel per hour at and flight level
In aviation and aviation meteorology, a flight level (FL) is an aircraft's altitude at standard air pressure, expressed in hundreds of feet. The air pressure is computed assuming an International Standard Atmosphere pressure of 1013.25 hPa ...
(FL)410, rising to per hour without winglets at FL380 and at FL290.
;CitationJet CJ1
:Model 525 serial numbers 0360 to 0599 are marketed as the CitationJet CJ1 and are powered by the same Williams FJ44-1A. It was improved with a Pro Line 21 avionics suite, and a moderate increase in maximum takeoff weight.
;CitationJet CJ1+
:Model 525 serial number 0600 and higher are marketed as CitationJet CJ1+ and are powered by Williams FJ44-1AP turbofans. With the same airframe, it has Pro Line 21 avionics package and FADEC
A full authority digital engine (or electronics) control (FADEC) is a system consisting of a digital computer, called an "electronic engine controller" (EEC) or "engine control unit" (ECU), and its related accessories that control all aspects of ai ...
engine control. It was certified in 2005.
: The GE Honda HF120
The GE Honda HF120 is a small turbofan for the light business jet market, the first engine to be produced by GE Honda Aero Engines.
Development
Succeeding Honda's original HF118 prototype, the HF120 was undergoing testing in July 2008, with ce ...
engine was announced as a retrofit option for the CJ/CJ1/CJ1+ in 2014.
;Citation M2
:Model 525s marketed as Cessna Citation M2 are powered by improved FJ44-1AP-21 turbofans offering 10 to 15% more cruise thrust and up to 5% more hot-and-high
In aviation, hot and high is a condition of low air density due to high ambient temperature and high airport elevation. Air density decreases with increasing temperature and altitude. The lower air density reduces the power output from the ai ...
thrust, and are equipped with modern Garmin G3000
The Garmin G3000 (and G2000/G5000) is an avionics system designed by Garmin Aviation for light turbine aircraft. The integrated touchscreen system, containing multiple glass cockpit displays, for operating a synthetic vision system, and a thre ...
avionics replacing Rockwell Collins
Rockwell Collins was a multinational corporation headquartered in Cedar Rapids, Iowa, providing avionics and information technology systems and services to government agencies and aircraft manufacturers. It was formed when the Collins Radio Comp ...
Pro Line 21. Launched in September 2011, it is based on the then out-of-production CJ1 variant and features a new cabin layout and a more efficient FJ44 version. The initial M2 prototype first flew on 9 March 2012; it was not a conforming airframe but was testing the Garmin G3000 avionics and Williams FJ44-1AP-21 turbofans while another aircraft was expected to join the certification program in May 2012 to be used for aerodynamics testing. Compared to the CJ1+, it climbs more quickly, offers a more comfortable cabin and is faster by at FL 410. The wing is wider due to small winglet
Wingtip devices are intended to improve the efficiency of fixed-wing aircraft by reducing drag. Although there are several types of wing tip devices which function in different manners, their intended effect is always to reduce an aircraft' ...
s. The FJ44-1AP-21s TBO can reach 5,000 h and the aircraft burns per hour at TAS, FL 400, ISA+3C conditions and at a weight of . At high-speed cruise, it can fly one pilot and four passengers over in 2 h 49 min. It climbs to FL 410 in 24 min, 27% faster than its closest competitor, where it is faster than the Embraer Phenom 100
The Embraer EMB-500 Phenom 100 is a light business jet designed and produced by the Brazilian aircraft manufacturer Embraer.
The project was announced in November 2005. On 26 July 2007, the aircraft made its first flight. It was awarded a type ...
E. With 150 produced since introduction in 2013, it became Cessna's entry-level jet after the Citation Mustang
The Cessna Citation Mustang is a very light jet that was built by Cessna.
Launched at the 2002 NBAA convention, the Model 510 first flew on April 23, 2005. It received its FAA type certification on September 8, 2006, and was first delivered o ...
production stopped in May 2017. The 250th M2 was delivered on June 15, 2020. In 2022, its equipped price was $5.855M.
Model 525A
The ICAO aircraft type designator
An aircraft type designator is a two-, three- or four-character alphanumeric code designating every aircraft type (and some sub-types) that may appear in flight planning. These codes are defined by both the International Civil Aviation Organizatio ...
for the CJ2 models is C25A.
;CitationJet CJ2
:Model 525A serial numbers 0001 to 0299, marketed as the CitationJet CJ2 is a 5-foot stretch of the CJ1 (Model 525) powered by Williams FJ44-2C turbofans and first delivered in 2000.
;CitationJet CJ2+
:Model 525A serial numbers 0300 and higher, marketed as the CitationJet CJ2+ and first delivered in April 2006, offer increased performance with updated avionics and Williams FJ44-3A-24 turbofans with FADEC
A full authority digital engine (or electronics) control (FADEC) is a system consisting of a digital computer, called an "electronic engine controller" (EEC) or "engine control unit" (ECU), and its related accessories that control all aspects of ai ...
control, with 4-passenger NBAA IFR
In aviation, instrument flight rules (IFR) is one of two sets of regulations governing all aspects of civil aviation aircraft operations; the other is visual flight rules (VFR).
The U.S. Federal Aviation Administration's (FAA) ''Instrument Fly ...
range increased to 1550 nmi, maximum cruise speed of 413 kn, and decreased runway requirements; many features such as TCAS and TAWS
In aviation, a terrain awareness and warning system (TAWS) is generally an on-board system aimed at preventing unintentional impacts with the ground, termed "controlled flight into terrain" accidents, or CFIT.Federal Aviation AdministrationInsta ...
were made standard.
;CitationJet CJ2+ Alpine Edition
:In 2014, Cessna started offering an upgrade package for the CJ2+ called Alpine Edition. It incorporates Garmin G3000
The Garmin G3000 (and G2000/G5000) is an avionics system designed by Garmin Aviation for light turbine aircraft. The integrated touchscreen system, containing multiple glass cockpit displays, for operating a synthetic vision system, and a thre ...
avionics and new cabin stylings similar to those introduced by Cessna to the CJ1+ when it became the M2. In 2012, the CJ2+ unit cost US$7.044M. The CJ2 went out of production due to low demand in January 2016.
Model 525B
The ICAO aircraft type designator
An aircraft type designator is a two-, three- or four-character alphanumeric code designating every aircraft type (and some sub-types) that may appear in flight planning. These codes are defined by both the International Civil Aviation Organizatio ...
for the CJ3 models is C25B.
;CitationJet CJ3
:Model 525B are marketed as the CitationJet CJ3 are a further stretch of the CJ2 powered by Williams FJ44-3A turbofans. Unveiled at the September 2002 National Business Aviation Association
The National Business Aviation Association (NBAA) is a non-profit, 501(c)(6) organization based in Washington, DC, United States. NBAA’s mission, according to the non-profit data and transparency organization GuideStar, is: “to foster an en ...
convention, it first flew on April 17, 2003, was FAA
The Federal Aviation Administration (FAA) is the largest transportation agency of the U.S. government and regulates all aspects of civil aviation in the country as well as over surrounding international waters. Its powers include air traffic m ...
certified in October 2004 and deliveries began in December of that year. The cockpit with Rockwell Collins
Rockwell Collins was a multinational corporation headquartered in Cedar Rapids, Iowa, providing avionics and information technology systems and services to government agencies and aircraft manufacturers. It was formed when the Collins Radio Comp ...
avionics
Avionics (a blend word, blend of ''aviation'' and ''electronics'') are the Electronics, electronic systems used on aircraft. Avionic systems include communications, Air navigation, navigation, the display and management of multiple systems, ...
is designed for single-pilot operation but can accommodate two crew members. Its customizable cabin typically has six club seats in a center-style configuration with an accessible in flight baggage compartment and external baggage access.
: Between its production debut in late 2004 and spring 2018, 500 of CJ3s and CJ3+s were delivered; 2004-2009 models are sold for $3.5 million and $5.0-5.5 million for 2009-2014 models.
: CJ3 can cruise at its MMo at FL450 over with four passengers, or more than at a slower speed, exceeding Textron predictions.
: Hourly, CJ3 burns , its engine maintenance cost $313.60, its parts $251.72 and labor cost is $298.
;CitationJet CJ3+
:The CitationJet CJ3+ is an upgraded version of the CJ3. The aircraft received FAA certification in 2014. The flight deck of CJ3+ is upgraded to use Garmin G3000
The Garmin G3000 (and G2000/G5000) is an avionics system designed by Garmin Aviation for light turbine aircraft. The integrated touchscreen system, containing multiple glass cockpit displays, for operating a synthetic vision system, and a thre ...
avionics, and its cabin has M2-style seats with foldable armrests. In 2022, its equipped price was $9.915M.
Model 525C
The ICAO aircraft type designator
An aircraft type designator is a two-, three- or four-character alphanumeric code designating every aircraft type (and some sub-types) that may appear in flight planning. These codes are defined by both the International Civil Aviation Organizatio ...
for the CJ4 models is C25C.
;Cessna Citation CJ4
: The stretched CJ4 was launched at the October 2006 NBAA conference. Its wing design comes from the moderately swept wing of the Citation Sovereign. Powered by Williams FJ44-4A turbofans, it has a maximum range of 2,165 nmi (4,010 km). Its cabin is 21 inches longer than the CJ3 and can seat up to nine people plus one in the cockpit. It first lifted off on May 5, 2008, from McConnell Air Force Base
McConnell Air Force Base is a United States Air Force base located four miles (6 km) southeast of the central business district of Wichita, a city in Sedgwick County, Kansas, United States., effective 2007-12-20 The airbase was named in ...
in Wichita, Kansas and first deliveries started in 2010.
: In 2011, the Federal Aviation Administration
The Federal Aviation Administration (FAA) is the largest transportation agency of the U.S. government and regulates all aspects of civil aviation in the country as well as over surrounding international waters. Its powers include air traffic m ...
temporarily grounded the CJ4 and issued an airworthiness directive because of fires in the original Lithium-ion battery
A lithium-ion or Li-ion battery is a type of rechargeable battery which uses the reversible reduction of lithium ions to store energy. It is the predominant battery type used in portable consumer electronics and electric vehicles. It also se ...
equipment.
: The cabin is pressurized at and the seating area is longer than in the CJ3, with a typical forward side-facing divan followed by a four chairs club and two forward facing chairs.
: It can carry a payload with full fuel, cruise up to FL450 and takeoff from field on a standard day.
: Block speeds are and it burns of fuel per hour.
: Maintenance is $269 per hour for labor and $370 per hour for parts excluding the engine maintenance plan is $317 per hour for a 5,000 h TBO.
: By June 2019, early models are $5.5-5.8 million for resale and up to over $7 million for later ones.
: Compared to the CJ4, the CJ3+ offers almost as much range, but carries fewer passengers with full tanks and is slower, while the Embraer Phenom 300 has better fuel efficiency and more tanks-full payload.
: The 300th CJ4 was delivered in June 2019. In 2022, its equipped price was $11.29M.[
]
Specifications
See also
References
Notes
Bibliography
*
External links
*
*
*
*
*
*
*
*
*
{{Cessna
CitationJet
1990s United States business aircraft
Twinjets
Low-wing aircraft
CitationJet
T-tail aircraft
Aircraft first flown in 1991
no:Cessna 525 CitationJet