The Cadillac CTS is an
executive car
Executive car is a British term for a large car which is equivalent to the European E-segment and American full-size classifications. Executive cars are larger than compact executive cars (and the non-luxury equivalent mid-size cars), and smal ...
that was manufactured and marketed by
General Motors from 2003 until 2019 across three generations. Historically, it was priced similarly to cars on the
compact luxury spectrum; but it has always been sized closely to its mid-size rivals. The third generation competes directly with the mid-size luxury cars. Initially available only as a 4-door sedan on the
GM Sigma platform
The General Motors Sigma platform is a mid-size automobile platform used by General Motors from the 2003 to 2015 model years. Exclusive to the Cadillac division, Sigma was the successor to the Opel-designed V platform. Initially developed for ...
, GM had offered the second generation CTS in three body styles: 4-door sedan, 2-door coupe, and 5-door sport wagon also using the Sigma platform — and the third generation was offered only as a sedan, using a stretched version of the
GM Alpha platform
The GM Alpha platform currently underpins General Motors' compact to mid-size, front-engine, rear-wheel and four-wheel drive vehicles. Platform basics include MacPherson struts on the front, 5 link independent rear, use of high strength steel ...
.
The third-generation CTS's indirect successor is the smaller CT5, which, like the first- and second-generation CTS, takes on the BMW 3 Series and Mercedes-Benz C-Class, while maintaining its 5 Series/E-Class size.
Wayne Cherry
Wayne K. Cherry (born 1937) is an American car designer educated at Art Center College of Design and employed by General Motors from 1962 through 2004, retiring as Vice President of Design. Cherry worked for General Motors in the United States fro ...
and Kip Wasenko designed the exterior of the first generation CTS, marking the production debut of a
design language
A design language or design vocabulary is an overarching scheme or style that guides the design of a complement of products or architectural settings, creating a coherent design system for styling.
Objectives
Designers wishing to give their su ...
(marketed as "Art and Science") first seen on the
Evoq concept car. Bob Boniface and Robin Krieg designed the exterior of the third generation CTS.
CTS-V
The Cadillac CTS-V is a high-performance version of the Cadillac CTS. The CTS-V series includes three body styles, all of which feature a
pushrod
A valvetrain or valve train is a mechanical system that controls the operation of the intake and exhaust valves in an internal combustion engine. The intake valves control the flow of air/fuel mixture (or air alone for direct-injected engines) ...
OHV
An overhead valve (OHV) engine, sometimes called a ''pushrod engine'', is a piston engine whose valves are located in the cylinder head above the combustion chamber. This contrasts with earlier flathead engines, where the valves were located bel ...
V-8 engine and a sport-tuned suspension. The four-door CTS-V sedan was introduced in 2004, and the CTS-V sport wagon and coupe were introduced in 2010 for the 2011 model year. The sedan competes in the North American consumer market against other high-performance luxury sedans and "echoes" their quality but is a more affordable option than competitors such as the
Audi RS6
The Audi RS 6 is a high-performance variant of the Audi A6 range, produced by the high-performance subsidiary company Audi Sport GmbH, for its parent company Audi AG, a subsidiary of the Volkswagen Group, from 2002 onwards.
The first and se ...
,
BMW M5
The BMW M5 is a high performance variant of the BMW 5 Series marketed under the BMW M sub-brand. It is considered an iconic vehicle in the sports sedan category. The majority of M5s have been produced in the sedan (saloon) body style, but in so ...
, and
Mercedes E63 AMG
The Mercedes-Benz E-Class is a range of executive cars manufactured by German automaker Mercedes-Benz in various engine and body configurations. Produced since 1953, the E-Class falls midrange in the Mercedes line-up, and has been marketed worldwi ...
.
The second generation CTS-V sedan, coupe and station wagon was sold through 2014, concurrent with the third generation standard sedan, until the third generation CTS-V was ready. The car was discontinued and replaced by the
CT5–V Blackwing in 2019.
First generation (2003)
Introduced in early 2002 as a 2003 model, the CTS sedan was built on GM's new
rear-wheel drive
Rear-wheel drive (RWD) is a form of engine and transmission layout used in motor vehicles, in which the engine drives the rear wheels only. Until the late 20th century, rear-wheel drive was the most common configuration for cars.
Most rear-wheel ...
Sigma platform and sported a fully independent suspension. It was the first Cadillac to be offered with a
manual transmission
A manual transmission (MT), also known as manual gearbox, standard transmission (in Canada, the United Kingdom, and the United States), or stick shift (in the United States), is a multi-speed motor vehicle transmission (mechanics), transmission ...
since the 1988
Cimarron. The CTS was designed as a replacement for the
Opel
Opel Automobile GmbH (), usually shortened to Opel, is a German automobile manufacturer which has been a subsidiary of Stellantis since 16 January 2021. It was owned by the American automaker General Motors from 1929 until 2017 and the PSA Grou ...
-based
Catera. (The acronym "CTS" stands for Catera Touring Sedan.)
Wayne Cherry
Wayne K. Cherry (born 1937) is an American car designer educated at Art Center College of Design and employed by General Motors from 1962 through 2004, retiring as Vice President of Design. Cherry worked for General Motors in the United States fro ...
and Kip Wasenko designed the exterior of the first generation CTS and this vehicle marked the production debut of the "Art and Science"
design language
A design language or design vocabulary is an overarching scheme or style that guides the design of a complement of products or architectural settings, creating a coherent design system for styling.
Objectives
Designers wishing to give their su ...
first seen on the
Evoq concept car.
CTS vehicles are built at GM's
Lansing Grand River Assembly
Lansing Grand River Assembly (LGR) is a General Motors owned and operated automobile assembly facility located in Lansing, Michigan, United States. Lansing Grand River Assembly produces vehicles built upon the GM Alpha platform including the Cad ...
in Lansing, Michigan.
Originally powered by a 3.2 L
LA3 V6 producing , the CTS received an updated 3.6 L
DOHC
An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion c ...
V6 with
variable valve timing
In internal combustion engines, variable valve timing (VVT) is the process of altering the timing of a valve lift event, and is often used to improve performance, fuel economy or emissions. It is increasingly being used in combination with varia ...
as an option in 2004, producing and of torque. The 3.2 L engine went out of production in 2005, when a new 2.8 L version of the
DOHC
An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion c ...
V6 debuted in an entry-level version of the CTS. In Europe, the 2.8 L replaced the previous entry-level 2.6 L engine.
The CTS was originally offered with either GM's in-house five-speed
5L40-E automatic transmission
An automatic transmission (sometimes abbreviated to auto or AT) is a multi-speed transmission used in internal combustion engine-based motor vehicles that does not require any input from the driver to change forward gears under normal driving c ...
or a five-speed
Getrag
Getrag (), stylized as GETRAG, was a major supplier of transmission systems for passenger cars and commercial vehicles. The company was founded on 1 May 1935, in Ludwigsburg, Germany, by Hermann Hagenmeyer; as the ''Getriebe und Zahnradfabrik ...
260 manual transmission
A manual transmission (MT), also known as manual gearbox, standard transmission (in Canada, the United Kingdom, and the United States), or stick shift (in the United States), is a multi-speed motor vehicle transmission (mechanics), transmission ...
. For the 2005 model year, the Getrag was replaced with an
Aisin
is a Japanese corporation that develops and produces components and systems for the automotive industry. Aisin is a Fortune Global 500 company, ranked 359 rankings. Aisin is a member of the Toyota Group of companies.
Aisin was founded in 1965 ...
AY-6 six-speed.
In 2004, GM introduced the CTS-V, a high-performance version of the CTS intended to compete with luxury performance sedans like the BMW M3/M5, Audi S4/S6, and Mercedes-Benz C and E-class AMGs. The 2004 and 2005 CTS-Vs were equipped with the 5.7L LS6 V-8 ( at 6,000 rpm, at 4,800 rpm), a Tremec T56 6-speed manual transmission, 14+" rotors and Brembo 4-piston calipers front and rear, suspension upgrades (higher spring rates, stiffer anti-roll bars, six-lug hubs, and two available damper packages), and subtle exterior changes. As the LS6 was phased out, the 2006 and 2007 CTS-Vs received the 6.0L LS2 V-8, which carried the same HP and torque ratings (with peak torque coming 400 rpm sooner).
A prototype first generation CTS station wagon was made but it was never put into production.
File:Cadillac CTS 002.JPG, Japanese CTS
File:CTS interior.jpg, Interior
File:Cadillac CTS China 2016-04-07.jpg, Chinese CTS
CTS-V (2004–2007)
Chassis
The first generation CTS-V is based on the same rear-wheel-drive
GM Sigma platform
The General Motors Sigma platform is a mid-size automobile platform used by General Motors from the 2003 to 2015 model years. Exclusive to the Cadillac division, Sigma was the successor to the Opel-designed V platform. Initially developed for ...
as is the base model CTS. The use of a V8 engine required a unique engine cradle distinct from the base CTS V6. Larger anti-roll bars and larger shocks were also added. The spring rate was significantly increased. The 2006-2007 update also included a stronger rear differential and
half shaft
An axle or axletree is a central shaft for a rotating wheel or gear. On wheeled vehicles, the axle may be fixed to the wheels, rotating with them, or fixed to the vehicle, with the wheels rotating around the axle. In the former case, bearin ...
design. Unique front and rear treatments also included mesh grilles over the front openings, a track-ready suspension, six-lug hubs instead of the regular CTS's five-lug units, and 18×8.5 inch wheels inside of P245/45R18 Z-rated
Goodyear Eagle F1 Supercar
run-flat tire
A run-flat tire/tyre is a pneumatic vehicle tire that is designed to resist the effects of deflation when punctured, and to allow the vehicle to continue to be driven at reduced speeds - under – and for limited distances – usually , dependin ...
s. Brakes were rotors in the front, with rotors in the rear - each with four-piston
Brembo
Brembo S.p.A. is an Italian manufacturer of automotive brake systems, especially for high-performance cars and motorcycles. Its head office is in Curno, Bergamo, Italy.
History
Brembo was established in Paladina, Italy on January 11, 1961 ...
calipers on the front and rear wheels. In addition, GM badges were added on 2006 models. For performance enthusiasts, a high performance suspension package (RPO FG2) was available as a dealer installed option.
Engine
The CTS sedan is enhanced with GM performance parts like a
GM LS engine
"LS engine" is the colloquial name given to the third and fourth generation small-block V8 gasoline engine used in General Motors' vehicles. The name evolved from the need to differentiate the Gen 3/Gen 4 small blocks from the original Gen 1 ...
V8 from the C5-generation
Chevrolet Corvette
The Chevrolet Corvette is a two-door, two-passenger luxury sports car manufactured and marketed by Chevrolet since 1953. With eight design generations, noted sequentially from C1 to C8, the Corvette is noted for its performance and distinctiv ...
Z06, as well as the Corvette Z06's six-speed
Tremec
TREMEC (Transmisiones y Equipos Mecánicos SA de CV, formerly Transmission Technology Corporation, TTC) is a manufacturer of automobile transmissions and drivetrain components based in Querétaro, Mexico.
Company
Torque transfer solutions fro ...
manual transmission
A manual transmission (MT), also known as manual gearbox, standard transmission (in Canada, the United Kingdom, and the United States), or stick shift (in the United States), is a multi-speed motor vehicle transmission (mechanics), transmission ...
gear ratios. From 2004 and 2005, the CTS-V came with the 5.7 L pushrod
OHV
An overhead valve (OHV) engine, sometimes called a ''pushrod engine'', is a piston engine whose valves are located in the cylinder head above the combustion chamber. This contrasts with earlier flathead engines, where the valves were located bel ...
LS6 engine producing at 6,000 rpm and of torque at 4,800 rpm. The torque reduction of the CTS-V vs the LS6 used in the C5 Z06, was due to the exhaust manifold that needed to be used on the CTS-V. From 2006 to 2007, the previous
LS6 engine was superseded by the new 6.0 L OHV
LS2 engine
An engine or motor is a machine designed to convert one or more forms of energy into mechanical energy.
Available energy sources include potential energy (e.g. energy of the Earth's gravitational field as exploited in hydroelectric power gen ...
as used in the base 2005
Chevrolet Corvette
The Chevrolet Corvette is a two-door, two-passenger luxury sports car manufactured and marketed by Chevrolet since 1953. With eight design generations, noted sequentially from C1 to C8, the Corvette is noted for its performance and distinctiv ...
. The new LS2 engine was rated at the same at 6,000 rpm with the peak torque of at 4,400 rpm. While both engines offer the same HP and torque specifications, the LS2's benefit was a wider torque band, due to the higher displacement it offered.
Transmission
The only available transmission was the six-speed manual
Tremec T56. The transmission used the
skip-shift feature to conserve fuel during light loads by preventing drivers from using the second and third gears, and a dual mass flywheel to reduce "rattle" in no load conditions. The rear axle was a Getrag limited slip IRS unit with a 3.73:1 ratio.
Performance
General Motors states a 0- time of 4.6 seconds for the first generation CTS-V, with the quarter mile time estimated at 13.1 seconds at , onward to a stated top speed of . The 14 inch diameter Brembo brakes can slow the vehicle from in 110 feet. The first generation CTS-V also posted a lap time of 8 minutes 19 seconds at Germany's famed Nürburgring Nordschleife, competitive with rivals such as the Mercedes-Benz E55 AMG and BMW M5.
Second generation (2008)
GM revealed the all-new 2008 CTS at the
North American International Auto Show
The North American International Auto Show (NAIAS), also known as the Detroit Auto Show as of 2022 and prior to NAIAS, is an annual auto show held in Detroit, Michigan, U.S., at Huntington Place. The show was held in January from 1989 to 2019. ...
in January 2007. The 2008–2009 base model featured a 3.6 L LY7 V6 with and of torque carried over from the previous generation. A second engine, a new 3.6 L direct-injection V6 VVT engine with and of torque was also offered. For 2010, the base engine changed to a 3.0L
variable valve timing
In internal combustion engines, variable valve timing (VVT) is the process of altering the timing of a valve lift event, and is often used to improve performance, fuel economy or emissions. It is increasingly being used in combination with varia ...
(VVT) V6 with and of torque. A 6-speed manual transmission was standard equipment on the second generation CTS and GM's 6-speed Hydra-matic
6L50 automatic transmission was available as an option on all variants. On-demand all-wheel drive was offered with both engines when equipped with an automatic transmission.
Suspension, braking, and steering improvements from the previous generation CTS-V were designed into the new standard CTS.
The second generation CTS was wider and longer than the original, measuring long, wide and in height. Wheelbase remained unchanged at , but with a wider front/rear track of , donated by the larger
STS
STS, or sts, may refer to:
Medicine
* Secondary traumatic stress, a condition which leads to a diminished ability to empathize
* Sequence-tagged site, a gene-reference in genomics
* Soft-tissue sarcoma
* Staurosporine, an antibiotic
* STS (gen ...
. Other changes included a revamped exterior, with a new, larger grille, slimmer headlights and taillights, side air extractor
vents
Vent or vents may refer to:
Science and technology Biology
*Vent, the cloaca region of an animal
*Vent DNA polymerase, a thermostable DNA polymerase
Geology
*Hydrothermal vent, a fissure in a planet's surface from which geothermally heated water ...
located forward of the front doors, and new nine-spoke 18-inch wheels, surrounding larger high-performance brake calipers and rotors. Available features on the second-gen CTS included a
Bose
Bose may refer to:
* Bose (crater), a lunar crater
* ''Bose'' (film), a 2004 Indian Tamil film starring Srikanth and Sneha
* Bose (surname), a surname (and list of people with the name)
* Bose, Italy, a ''frazioni'' in Magnano, Province of Biella ...
5.1 surround sound system, GM's
Stabilitrak ESC system, a tire pressure monitoring system, a navigation system with real-time traffic and weather data, an integrated 40
GB hard drive for music storage, swiveling headlights, and remote starting.
In 2008, the General Motors chose the CTS to relaunch the Cadillac brand in Australia and New Zealand.
However, in early 2009, amidst the global financial crisis, a last-minute decision was made not to go ahead with the Australian launch. As a result, the entire batch of cars, less one, which had already been shipped to Australia were transferred to New Zealand and sold via selected
Holden New Zealand
General Motors New Zealand Limited (formerly named Holden New Zealand Limited from 1994 until 2020), is a subsidiary of General Motors that distributes GM' motor vehicles, engines, components and parts in New Zealand.
This company was incorpora ...
dealers. One dealer ended up buying the entire stock and owing to their popularity, sourced further UK market spec models while the model was still produced in RHD.
During the 2010 model year, the GM badges were dropped, although early 2010 models still had GM badges.
For the 2012 CTS, the front grille used higher quality materials to give a more vertical design, and the Cadillac logo was being subtly changed to give a more vibrant appearance. The biggest change was to the engine. Although kept the same 3.6-liter displacement, the
V6 was able to produce while dropping weight thanks to some modified engine internals. For 2012, GM also offered some new technology and option packages with the Cadillac CTS.
File:Cadillac CTS rear.JPG, European-spec Cadillac CTS
File:CTS Vegas.jpg, US–spec Cadillac CTS
File:Cadillac CTS Dash.jpg, CTS interior
Coupe
At the
2008 North American International Auto Show in
Detroit
Detroit ( , ; , ) is the largest city in the U.S. state of Michigan. It is also the largest U.S. city on the United States–Canada border, and the seat of government of Wayne County. The City of Detroit had a population of 639,111 at th ...
,
General Motors unveiled a
coupe
A coupe or coupé (, ) is a passenger car with a sloping or truncated rear roofline and two doors.
The term ''coupé'' was first applied to horse-drawn carriages for two passengers without rear-facing seats. It comes from the French past parti ...
concept version of the CTS, alongside the new CTS-V performance sedan. The coupe's unveiling surprised the media and public, stealing a great deal of attention away from the CTS-V. In November 2009, the production version was unveiled in a press release. The coupe went into production in spring 2010 for sale in August 2010 as a 2011 model. The design of the production model is very similar to the concept, with the B-pillars still removed. The standard engine was a 3.6L direct injected V6 rated at 304 hp. Like the sedan, both six-speed manual and automatic transmissions, in either RWD or AWD configurations, were available. A CTS-V Coupe was introduced, first shown at the 2010 North American International Auto Show in Detroit. The CTS Coupe was Cadillac's first coupe since the
Eldorado
El Dorado (, ; Spanish for "the golden"), originally ''El Hombre Dorado'' ("The Golden Man") or ''El Rey Dorado'' ("The Golden King"), was the term used by the Spanish in the 16th century to describe a mythical tribal chief (''zipa'') or king o ...
, which was discontinued in 2002. The CTS Coupe was discontinued after the 2014 model year, and the CTS-V Coupe discontinued after the 2015 model year.
Sport Wagon
At the 2008
Pebble Beach Concours d'Elegance
The Pebble Beach Concours d'Elegance is an automotive charitable event held each year on the Pebble Beach Golf Links in Pebble Beach, California. It is widely considered the pinnacle event of its kind and one of the most prestigious car events in ...
, Cadillac presented the 2010 CTS Sport Wagon. The wagon became available in late 2009 as a 2010 model. A CTS-V version was added for 2011.
The CTS Sport Wagon is available in either
rear-wheel-drive
Rear-wheel drive (RWD) is a form of engine and transmission layout used in motor vehicles, in which the engine drives the rear wheels only. Until the late 20th century, rear-wheel drive was the most common configuration for cars.
Most rear-wheel ...
or
all-wheel-drive
An all-wheel drive vehicle (AWD vehicle) is one with a powertrain capable of providing power to all its wheels, whether full-time or on-demand.
The most common forms of all-wheel drive are:
;1x1 : All unicycles Reflecting one axle with one w ...
layouts, and is powered by either a 3.0-liter
DOHC
An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion c ...
V6 engine or a 3.6-liter V6 with
variable valve timing
In internal combustion engines, variable valve timing (VVT) is the process of altering the timing of a valve lift event, and is often used to improve performance, fuel economy or emissions. It is increasingly being used in combination with varia ...
. The 3.0-liter engine produces , and the 3.6-liter produces .
With the third generation, Cadillac ceased production of the CTS wagon.
CTS-V (2009–2014)
The second generation CTS-V is based on the new
GM Sigma II platform. The rear-wheel-drive platform is the basis for the 2008 to present Cadillac CTS base model with which the CTS-V shares most of the body work. The suspension features coil springs front and rear. The front suspension is a
control arm
In automotive suspension, a control arm, also known as an A-arm, is a hinged suspension link between the chassis and the suspension upright or hub that carries the wheel. In simple terms, it governs a wheel's vertical travel, allowing it to mo ...
arrangement while the rear is an independent
multi-link suspension
A multi-link suspension is a type of vehicle suspension with one or more longitudinal arms. A wider definition can consider any independent suspensions having three control links or more multi-link suspensions. These arms do not have to be of e ...
. To improve the handling and comfort, the 2009 CTS-V uses
BWI Group's MagneRide
MagneRide is an automotive adaptive suspension with magnetorheological damper system developed by the Delphi Automotive corporation, during a period when the company was a subsidiary of General Motors (GM), that uses magnetically controlled dampe ...
technology. The dampers, filled with
magnetorheological fluid, are adjusted based on sensor readings that happen at 1 ms intervals.
The sedan has four-wheel disc brakes similar to the first generation. The front brakes were increased in size to ventilated discs with six piston
Brembo
Brembo S.p.A. is an Italian manufacturer of automotive brake systems, especially for high-performance cars and motorcycles. Its head office is in Curno, Bergamo, Italy.
History
Brembo was established in Paladina, Italy on January 11, 1961 ...
fixed calipers. The rear brakes are ventilated rotors with four piston calipers. Steering is speed-sensing hydraulic-assist rack-and-pinion. The steering ratio is 16.1:1. Tire sizes are 255/40ZR19 front and 285/35ZR19 rear on 19×9.0 inch and 19×9.5 inch wheels front and rear.
The 2009 CTS-V was added to the ''
Car and Driver
''Car and Driver'' (''CD'' or ''C/D'') is an American automotive enthusiast magazine. In 2006 its total circulation was 1.23 million. It is owned by Hearst Magazines, who purchased prior owner Hachette Filipacchi Media U.S. in 2011. It was fou ...
'' 10 Best Cars list.
Engine
The powerplant in the 2009 CTS-V is a
supercharged
In an internal combustion engine, a supercharger compresses the intake gas, forcing more air into the engine in order to produce more power for a given displacement.
The current categorisation is that a supercharger is a form of forced induct ...
LSA V-8, based on the
LS9 V-8 from the
Chevrolet Corvette C6 ZR1
The Chevrolet Corvette (C6) is the sixth generation of the Corvette sports car that was produced by Chevrolet division of General Motors for the 2005 to 2013 model years. It is the first Corvette with exposed headlamps since the 1962 model. Pro ...
. It produces and of
torque
In physics and mechanics, torque is the rotational equivalent of linear force. It is also referred to as the moment of force (also abbreviated to moment). It represents the capability of a force to produce change in the rotational motion of th ...
.
The choice to use a
pushrod engine
An overhead valve (OHV) engine, sometimes called a ''pushrod engine'', is a piston engine whose valves are located in the cylinder head above the combustion chamber. This contrasts with earlier flathead engines, where the valves were located bel ...
(OHV) arrangement is unique in the luxury performance sedan market where competitors typically use
dual overhead camshaft
An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion cha ...
(DOHC) engines. The engine is produced in GM's
Silao, Guanajuato
Silao is a municipality in the west-central part of the state of Guanajuato in Mexico. Its seat is the city of the same name.
This municipality lies adjacent to the west side of the municipality of Guanajuato, the state capital. This municipali ...
, Mexico engine assembly plant. The LSA engine has a
bore x
stroke
A stroke is a medical condition in which poor blood flow to the brain causes cell death. There are two main types of stroke: ischemic, due to lack of blood flow, and hemorrhagic, due to bleeding. Both cause parts of the brain to stop functionin ...
of .
[ The ]engine block
In an internal combustion engine, the engine block is the structure which contains the cylinders and other components. In an early automotive engine, the engine block consisted of just the cylinder block, to which a separate crankcase was atta ...
is cast aluminium 319-T5 alloy with cast iron cylinder liner
In a reciprocating engine, the cylinder is the space in which a piston travels.
The inner surface of the cylinder is formed from either a thin metallic liner (also called "sleeve") or a surface coating applied to the engine block. A piston is se ...
s. The crankshaft
A crankshaft is a mechanical component used in a piston engine to convert the reciprocating motion into rotational motion. The crankshaft is a rotating shaft containing one or more crankpins, that are driven by the pistons via the connecting ...
is forged steel using powdered-metal connecting rod
A connecting rod, also called a 'con rod', is the part of a piston engine which connects the piston to the crankshaft. Together with the crank, the connecting rod converts the reciprocating motion of the piston into the rotation of the cranksh ...
s. Piston
A piston is a component of reciprocating engines, reciprocating pumps, gas compressors, hydraulic cylinders and pneumatic cylinders, among other similar mechanisms. It is the moving component that is contained by a cylinder and is made gas-tig ...
s are high-silicon Hypereutectic
A eutectic system or eutectic mixture ( ) is a homogeneous mixture that has a melting point lower than those of the constituents. The lowest possible melting point over all of the mixing ratios of the constituents is called the ''eutectic tempe ...
Aluminium alloy replacing the forged aluminum used in the LS9 engine. The compression ratio
The compression ratio is the ratio between the volume of the cylinder and combustion chamber in an internal combustion engine at their maximum and minimum values.
A fundamental specification for such engines, it is measured two ways: the stati ...
is 9.1:1. The cylinder head
In an internal combustion engine, the cylinder head (often abbreviated to simply "head") sits above the cylinders and forms the roof of the combustion chamber.
In sidevalve engines, the head is a simple sheet of metal; whereas in more modern ov ...
s are based on the Corvette's LS3 head and are cast from type 356-T6 Aluminum alloy. The exhaust manifold
In automotive engineering, an exhaust manifold collects the exhaust gases from multiple cylinders into one pipe. The word ''manifold'' comes from the Old English word ''manigfeald'' (from the Anglo-Saxon ''manig'' anyand ''feald'' old and refe ...
s are cast iron. The supercharger is a twin four-lobe screw compressor
A rotary-screw compressor is a type of gas compressor, such as an air compressor, that uses a rotary-type positive-displacement mechanism. These compressors are common in industrial applications and replace more traditional piston compressors w ...
-type unit displacing . It is Eaton's
The T. Eaton Company Limited, later known as Eaton's, was a Canadian department store chain that was once the largest in the country. It was founded in 1869 in Toronto by Timothy Eaton, an immigrant from what is now Northern Ireland. Eaton's grew ...
Twin Vortices Series (TVS) generating a maximum boost of . Intake
An intake (also inlet) is an opening, structure or system through which a fluid is admitted to a space or machine as a consequence of a pressure differential between the outside and the inside. The pressure difference may be generated on the ins ...
air is cooled with a water-to-air intercooler
An intercooler is a heat exchanger used to cool a gas after compression. Often found in turbocharged engines, intercoolers are also used in air compressors, air conditioners, refrigeration and gas turbines.
Internal combustion engines
Mo ...
built directly into the supercharger unit.
Transmissions
There are manual and automatic transmission
An automatic transmission (sometimes abbreviated to auto or AT) is a multi-speed transmission used in internal combustion engine-based motor vehicles that does not require any input from the driver to change forward gears under normal driving c ...
choices. The manual is a Tremec TR-6060 six-speed transmission with a short-throw shifter, twin disk clutch and dual-mass flywheel. The 6L90 automatic is a paddle shift conventional (planetary gearing
An epicyclic gear train (also known as a planetary gearset) consists of two gears mounted so that the center of one gear revolves around the center of the other. A carrier connects the centers of the two gears and rotates the planet and sun gea ...
and torque converter
A torque converter is a type of fluid coupling that transfers rotating power from a prime mover, like an internal combustion engine, to a rotating driven load. In a vehicle with an automatic transmission, the torque converter connects the power ...
-based) automatic six-speed.
CTS-V sedan
Production of the CTS-V sedan began in the summer of 2008 in the Lansing, Michigan
Lansing () is the capital of the U.S. state of Michigan. It is mostly in Ingham County, although portions of the city extend west into Eaton County and north into Clinton County. The 2020 census placed the city's population at 112,644, making ...
GM plant. Total production of the CTS-V for the 2009 model year was approximately 3,500 out of approximately 59,716 CTS model production. The 2009 CTS-V has a base price of US$59,995, and was available for purchase as of November 1, 2008.
Standard features include: leather seats, lateral acceleration gauge, 19-inch aluminum alloy wheels, Michelin Pilot Sport PS2 tires, a built-in 40GB hard drive to store music, and LED
A light-emitting diode (LED) is a semiconductor Electronics, device that Light#Light sources, emits light when Electric current, current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy i ...
flash tracers to tell the driver when to shift.
Options include polished wheels, sunroof
A sunroof is a movable panel that opens to uncover a window in an automobile roof, allowing light and fresh air to enter the passenger compartment. Sunroofs can be manually operated or motor driven, and are available in many shapes, sizes and styl ...
, navigation system and, for the first time, Cadillac offers 14-way adjustable performance Recaro
Recaro Holding, as the parent company of the Recaro Group, owns the Recaro brand and the independently operating companies Recaro Aircraft Seating (aircraft seats) based in Schwäbisch Hall and Recaro eGaming (gaming seats) based in Stuttgart, Germ ...
seats.
The official 0- time for the second-generation CTS-V is 3.9 seconds, while the quarter mile is run at 12.0 seconds at . These numbers were duplicated by ''Road and Track'' magazine (0-60 mph in 3.9 seconds for the automatic and 4.1 seconds for the manual).
Coinciding with the release of General Motors' Viability Plan, the automaker has disbanded its High Performance Vehicle Operations team, the crew responsible for the line V-series Cadillacs, the Chevrolet Cobalt SS, the HHR SS, and the V8 version of the Colorado. According to Vince Muniga, a spokesman for GM, "All high-performance projects are on indefinite hold. The engineers are moving into different areas of the organization, and they will work on Cadillacs, Buicks, Chevrolets and Pontiacs." Muniga went on to say that there are no plans for high-performance versions of upcoming plans, but once GM is in a better financial position, the team could be reinstated.
For the 2010 model year, GM badges were dropped from near the doors, although earlier models still had the badges.
CTS-V Coupe
The CTS-V Coupe debuted at the 2010 North American International Auto Show in Detroit, and entered production in summer 2010 as a 2011 model. It has the same engine and transmission choices as the CTS-V sedan. The CTS-V Coupe features unique centered twin exhausts, a larger grille for air intake, and an optional "saffron" interior trim color. Like the CTS-V sedan, it comes standard with 19-inch aluminum wheels, Brembo brakes, and Magnetic Ride Control.
CTS-V Sport Wagon
When asked in 2009 about the possibility of a CTS-V wagon, the GM Vice Chairman at that time, Bob Lutz, replied, "... should sufficient demand materialize, there is no reason why we couldn't do a V-Series wagon, and I would be standing in line for one, just ahead of you." GM decided to move forward, introducing a 5-door sport wagon body style to the CTS-V vehicle line at the New York International Auto Show
The New York International Auto Show is an annual auto show that is held in Manhattan in late March or early April. It is held at the Jacob Javits Convention Center. It usually opens on or just before Easter weekend and closes on the first Su ...
on March 29, 2010.
The CTS-V wagon shares the engine and 6-speed manual or automatic transmission, Magnetic Ride Control, Brembo brakes, 19 inch aluminum wheels and performance tires and a dual-airflow grille also used in the CTS-V sedan and coupe. The United States Environmental Protection Agency lists the 2014 CTS-V Sport Wagon as the least fuel efficient small station wagon on sale in the United States with a combined EPA fuel economy rating of .
Performance
General Motors states a 0- time of 3.9 seconds for the CTS-V Sedan and 4.0 seconds for the CTS-V Coupe and Wagon.
The quarter mile time is reported to be 11.97 seconds at with a 60-foot at 1.76 seconds.
In May 2008, a 2009-model CTS-V sedan achieved a lap time of 7:59.32 at the Nürburgring Nordschleife
The is a 150,000 person capacity motorsports complex located in the town of Nürburg, Rhineland-Palatinate, Germany. It features a Formula One, Grand Prix race track built in 1984, and a long "North loop" track, built in the 1920s, around t ...
, which was the fastest documented time for a production sedan on factory tires, until the Porsche Panamera
The Porsche Panamera is a mid/full-sized luxury car (E-segment/F-segment in Europe) manufactured and marketed by German automobile manufacturer Porsche across two generations using a front-engine, rear or all-wheel drive configuration.
Pors ...
Turbo clocked a time of 7:56 in July 2009. The vehicle was driven by John Heinricy during the attempt.
The record breaking vehicle was sold in 2009 at the Barrett-Jackson Palm Beach auction.
Third generation (2014)
On March 26, 2013, Cadillac unveiled the third generation of the CTS. The 2014 CTS uses the 2.0L turbocharged I4 and 3.6L V6 from the ATS and also offers an all-new twin turbocharged V6 producing and of torque. The twin turbocharged engine is only available in the CTS Vsport, a new trim that serves as a step between the 3.6L V6 and the high-performance CTS-V.
Despite carrying the CTS name, the third generation model is actually closer in size and market position to the former STS.
Design
Bob Boniface and Robin Krieg designed the exterior of the third generation CTS. Eric Clough designed the interior.
Production
General Motors began assembling 2014 CTS sedans intended for sale to customers on September 16, 2013. Sales began in October 2013.
Reception
''Motor Trend'' named the third-generation CTS its 2014 Car of the Year. As customary with award winners, the magazine acquired a CTS (in Vsport trim) for a long-term test. Its verdict lauded the car's driving dynamics and reliability but criticized its CUE multi-media interface.
In a four-way comparison in the December 2013 issue of ''Car and Driver'' the 2014 CTS 3.6 placed second overall. The article praised the handling of the CTS stating " he CTSis the only car in this group that didn't just put up with hard driving, it indeed goaded its driver to go faster." and praised the stopping ability, stiff structure and light weight of the car. The article criticized the engine for being "coarse in the upper ranges", the acceleration times, the fuel economy and the CUE entertainment system.
Sales concerns led Cadillac to offer rebates to the 2014 models and lower sticker prices on the 2015 models.
Powertrains
All engines available in the 2014 CTS are constructed from cast aluminum blocks and heads and use direct injection and variable valve timing.
For the 2016 model year, the 6-speed 6L45 automatic transmission was replaced by the new 8-speed 8L45 automatic transmission, with the 8L45 also taking over duties with the naturally aspirated 3.6L V6 from the 8-speed Aisin TL-80SN automatic transmission. V-Sport models will continue to use the 8-speed Aisin TL-80SN. A new 3.6L V6, the LGX, replaced the 3.6L V6 LFX.
CTS-V (2016–2019)
The third generation CTS-V includes a at 6400 rpm and of torque
In physics and mechanics, torque is the rotational equivalent of linear force. It is also referred to as the moment of force (also abbreviated to moment). It represents the capability of a force to produce change in the rotational motion of th ...
at 3600 rpm LT4 supercharged
In an internal combustion engine, a supercharger compresses the intake gas, forcing more air into the engine in order to produce more power for a given displacement.
The current categorisation is that a supercharger is a form of forced induct ...
gasoline
Gasoline (; ) or petrol (; ) (see ) is a transparent, petroleum-derived flammable liquid that is used primarily as a fuel in most spark-ignited internal combustion engines (also known as petrol engines). It consists mostly of organic co ...
V8 engine
A V8 engine is an eight-cylinder piston engine in which two banks of four cylinders share a common crankshaft and are arranged in a V configuration.
The first V8 engine was produced by the French Antoinette company in 1904, developed and us ...
, as the most powerful Cadillac ever produced to date. The third generation CTS-V is sometimes referred to as a four-door Corvette, because of its supercharged V8 from the Corvette C7 Z06 with 10 less horsepower and a top speed of . It weighs . The new 2016 Cadillac CTS-V model equipped with an 8-speed automatic transmission
An automatic transmission (sometimes abbreviated to auto or AT) is a multi-speed transmission used in internal combustion engine-based motor vehicles that does not require any input from the driver to change forward gears under normal driving c ...
has been street tested with a best 0- test time of 3.5 seconds.
The CTS and CTS-V were discontinued after the 2019 model year; a new model, the CT5, built on an Alpha 2 platform, was scheduled to replace the CTS, and would also include a CT5 V series. Production ended in early 2019.
Awards
In its first year of production, the first-generation CTS was nominated for the 2002 North American Car of the Year
The North American Car, Utility and Truck of the Year are a set of automotive awards announced at a news conference each January at the North American International Auto Show in Detroit. The jury consists of no more than 60 automotive journali ...
award. The gen-2 CTS/CTS-V won MotorWeek's Driver's Choice Awards for "Best Sport Sedan" in 2008 and 2009. The second-generation CTS won the 2008 ''Motor Trend
''MotorTrend'' is an American automobile magazine. It first appeared in September 1949, and designated the first Car of the Year, also in 1949.
Petersen Publishing Company in Los Angeles, California, Los Angeles published ''MotorTrend'' until 19 ...
'' Car of the Year Car of the Year (COTY) is a common abbreviation for numerous automotive awards.
The "Car of the Year" phrase is considered to have been introduced by ''Motor Trend'' magazine in 1949 when the new publication named Cadillac as Motor Trend Car of th ...
award and was chosen as one of ''Car and Driver
''Car and Driver'' (''CD'' or ''C/D'') is an American automotive enthusiast magazine. In 2006 its total circulation was 1.23 million. It is owned by Hearst Magazines, who purchased prior owner Hachette Filipacchi Media U.S. in 2011. It was fou ...
's'' 10Best cars.
In 2009, the second-generation CTS and CTS-V were chosen for the ''Car and Driver'' 10Best list, making the CTS the first Cadillac to be chosen twice in consecutive years. In 2010, the second-generation CTS and CTS-V returned to the ''Car and Driver'' 10Best list under the sub-headline "Maybe the best American car ever made". The CTS-V made the ''Car and Driver'' 10Best list again in 2011 and 2012.
The third-generation CTS won the 2014 ''Motor Trend'' Car of the Year award and was named to the ''Car and Driver'' 10Best list. Also in 2014, the CTS ranked number one among Upscale Midsize Cars according to ''U.S. News & World Report''.
Marketing
The success of the CTS has been attributed in part to the car's placement in the 2003 sci-fi action film ''The Matrix Reloaded
''The Matrix Reloaded'' is a 2003 American science-fiction action film written and directed by the Wachowskis. It is a sequel to '' The Matrix'' (1999) and the second installment in the ''Matrix'' film series. The film stars Keanu Reeves, Lau ...
''. The producers of the film were seeking a car that would complement the film's atmosphere. General Motors suggested the then-unreleased CTS to the filmmakers, who accepted; ten prototypes damaged to different extents were used to represent the film's hero car, a silver CTS.
Motorsports
The CTS-V is raced in the SCCA
The Sports Car Club of America (SCCA) is a non-profit American automobile club and sanctioning body supporting road racing, rallying, and autocross in the United States. Formed in 1944, it runs many programs for both amateur and professional r ...
World Challenge series. The first generation CTS-V sedan competed from 2004 to 2007, winning the manufacturer's championship in 2005 and 2007. Starting in 2011 the second generation V competed as a coupe, winning Cadillac back-to-back manufacturer's championships in 2012 and 2013. The 2011 coupe race car is built by Pratt & Miller
Pratt Miller Engineering, also known as Pratt & Miller, is an American company involved in the automotive and arms industries. It was founded by Gary Pratt and Jim Miller in 1989. A defense division was added in 2013 and the company was acqu ...
. For the 2015 season, the CTS-V was replaced by the Cadillac ATS-V
The Cadillac ATS (short for ''Alpha Touring Sedan'') is a compact executive 4-door sedan and 2-door coupe manufactured and marketed by Cadillac and developed at the General Motors Technical Center in Warren, Michigan. Cadillac assembles the ATS a ...
.
Production and sales
Total combined sales of all Cadillac CTS models by year.
CTS-V Production by model year
References
External links
*
*
*
{{Cadillac
CTS
Cts or CTS may refer to:
Arts and entertainment Television
* Chinese Television System, a Taiwanese broadcast television station, including:
** CTS Main Channel ()
** CTS Education and Culture ()
** CTS Recreation ()
** CTS News and Info () ...
All-wheel-drive vehicles
Mid-size cars
Executive cars
Rear-wheel-drive vehicles
Coupés
Sports sedans
Vehicles built in Lansing, Michigan
Cars introduced in 2002
Motor vehicles manufactured in the United States
2010s cars