Bow And Warp Of Semiconductor Wafers And Substrates
   HOME

TheInfoList



OR:

Bow and warp of semiconductor wafers and substrates are measures of the flatness of
wafers A wafer is a crisp, often sweet, very thin, flat, light and dry biscuit, often used to decorate ice cream, and also used as a garnish on some sweet dishes. Wafers can also be made into cookies with cream flavoring sandwiched between them. They ...
.


Definitions

Bow is the deviation of the center point of the median surface of a free, un-clamped
wafer A wafer is a crisp, often sweet, very thin, flat, light and dry biscuit, often used to decorate ice cream, and also used as a garnish on some sweet dishes. Wafers can also be made into cookies with cream flavoring sandwiched between them. They ...
from the
reference plane In celestial mechanics, the plane of reference (or reference plane) is the plane used to define orbital elements (positions). The two main orbital elements that are measured with respect to the plane of reference are the inclination and the longi ...
, where the reference plane is defined by . This definition is based on now obsolete
ASTM ASTM International, formerly known as American Society for Testing and Materials, is an international standards organization that develops and publishes voluntary consensus technical standards for a wide range of materials, products, systems, an ...
F534. Warp is the difference between the maximum and the minimum distances of the median surface of a free, un-clamped wafer from the reference plane defined above. This definition follows ASTM F657, and ASTM F1390.


Modifications

The above definitions were developed for
capacitance Capacitance is the capability of a material object or device to store electric charge. It is measured by the change in charge in response to a difference in electric potential, expressed as the ratio of those quantities. Commonly recognized are ...
wafer thickness gauges such as ADE 9500, and later adopted by optical gauges. Even though these standards are currently obsolete. They were withdrawn without replacement but are still widely used for characterization of
semiconductor wafer In electronics, a wafer (also called a slice or substrate) is a thin slice of semiconductor, such as a crystalline silicon (c-Si), used for the fabrication of integrated circuits and, in photovoltaics, to manufacture solar cells. The wafer serv ...
s, metal and glass substrates for
MEMS Microelectromechanical systems (MEMS), also written as micro-electro-mechanical systems (or microelectronic and microelectromechanical systems) and the related micromechatronics and microsystems constitute the technology of microscopic devices, ...
devices,
solar cell A solar cell, or photovoltaic cell, is an electronic device that converts the energy of light directly into electricity by the photovoltaic effect, which is a physical and chemical phenomenon.
s, and many other applications.http://www.iop.org/EJ/abstract/0957-0233/19/2/025302


References

{{DEFAULTSORT:Bow And Warp Of Semiconductor Wafers And Substrates Semiconductor device fabrication