Bristol Siddeley Orpheus 703
   HOME

TheInfoList



OR:

The Bristol Siddeley Orpheus was a single-spool turbojet developed by Bristol Siddeley for various
light fighter A light fighter or lightweight fighter is a fighter aircraft towards the low end of the practical range of weight, cost, and complexity over which fighters are fielded. The light or lightweight fighter retains carefully selected competitive feat ...
/trainer applications such as the Folland Gnat and the
Fiat G.91 The Fiat G.91 is an Italian jet fighter aircraft designed and built by Fiat Aviazione, which later merged into Aeritalia. The G.91 has its origins in the NATO-organised NBMR-1 competition in 1953, which sought a light fighter-bomber (offici ...
. Later, the Orpheus formed the core of the first
Bristol Pegasus The Bristol Pegasus is a British nine-cylinder, single-row, air-cooled radial aero engine. Designed by Roy Fedden of the Bristol Aeroplane Company, it was used to power both civil and military aircraft of the 1930s and 1940s. Developed from t ...
vectored thrust turbofan used in the Harrier family.


Design and development

The engine had its genesis in a 1952 request by
Teddy Petter William Edward Willoughby "Teddy" Petter (8 August 1908, Highgate in Middlesex – 1 May 1968, Béruges) was a British aircraft designer. He is noted for Westland aircraft, Westland's wartime aeroplanes, the English Electric Canberra, Canberra, ...
of
Folland Folland is a surname. Notable people with the surname include: *Alison Folland (born 1978), American actress and filmmaker *Gerald Folland (born 1947), American mathematician *Henry Folland (1889–1954), British aviation engineer and aircraft desi ...
for an engine in the 5,000  pounds (22  kN) class to power a new trainer and lightweight fighter-bomber they were developing. Stanley Hooker, relatively new to the company after an earlier career at Rolls-Royce, took the project under his wing. He delivered a relatively simple and easy to maintain engine, which was put into use in the Folland Gnat, flying in 1955. The Orpheus incorporated the novel feature of a large-diameter shaft for its single spool which then needed only two bearings. The weight savings from deleting a bearing and associated parts listed below gave an engine with a thrust of 5,000 lbf but weighing only 800 lb. Eliminating the usual centre support bearing for the shaft joining the compressor and turbine meant the shaft would whirl, assuming a bowed shape, and damage the engine. Whirling was prevented by using a large diameter tube in place of the usual small diameter shaft. The large-diameter thin-walled tube, more than 8 inches in diameter was stiff enough to raise the whirling speed beyond the engine running range using only two bearings instead of the usual three. Two bearings gave a further advantage: previous engines had also needed a coupling in the shaft to allow for any misalignment between the static parts of the three bearings. With two bearings, the shaft simply followed the straight line between them. So the introduction of the large diameter tube allowed the removal of a bearing, a coupling, the engine's support structure for that bearing together with its lubrication system and cooling air supply. A cannular combustor was used with seven flame tubes. This was a recent development in jet engines and the Orpheus also included the innovation of incorporating the turbine entry duct and its stator vanes into the flame tube outlet, each flame tube providing one seventh of the overall duct. This had two advantages, it simplified the manufacture of a complicated and unreliable component, also the segmented design allowed easier allowance for thermal expansion. Developing a Sea Level Static thrust of , the Orpheus 701 had a 7-stage
axial compressor An axial compressor is a gas compressor that can continuously pressurize gases. It is a rotating, airfoil-based compressor in which the gas or working fluid principally flows parallel to the axis of rotation, or axially. This differs from other ...
driven by a single stage turbine. In 1957 NATO ran a competition for a light fighter design. All three finalists chose the Bristol Orpheus and as a result a substantial contribution towards the cost of the initial engine development was made available from the Mutual Weapons Development Program. The winner of the competition, the
Fiat G.91 The Fiat G.91 is an Italian jet fighter aircraft designed and built by Fiat Aviazione, which later merged into Aeritalia. The G.91 has its origins in the NATO-organised NBMR-1 competition in 1953, which sought a light fighter-bomber (offici ...
R and G.91T, used Fiat-built versions of the engine. Other users, mostly trainers, soon followed, including the Fuji T-1, HAL HF-24 ''Marut'', HA-300, and the experimental
Hunting H.126 The Hunting H.126 was an experimental aircraft designed and built by British aviation company Hunting Aircraft. The aircraft was developed in order to test the performance of blown flaps, which were commonly known in Britain as "jet flaps", At ...
and Short SB5. For later civilian applications, the Orpheus was chosen, after use of two each on the prototypes, as an option on the Lockheed JetStar, Lockheed's Vice President and head of the famous Skunk Works, Clarence "Kelly" Johnson stating; "These Orpheus engines ... have been the best engines the writer has ever used in a prototype aircraft. They were and are so good that it was decided at an early date to make all Jetstars from serial number two up capable of using two Orpheus engines (as an alternative to four American units). The Orpheus version ... is fully competitive in performance (except with one engine out) and will be offered to those who want its lower cost, simplicity, and - at least for some time - reliability". Many companies in the 1950s were looking at ways of producing a vertical take off and landing aircraft. Michel Wibault had the idea of using a
turboshaft engine A turboshaft engine is a form of gas turbine that is optimized to produce shaftpower rather than jet thrust. In concept, turboshaft engines are very similar to turbojets, with additional turbine expansion to extract heat energy from the exhaust ...
to drive four large centrifugal blowers which could be swivelled to vector the thrust. Hooker's engineers decided on using the Orpheus gas generator to drive a single large fan that would supply air to a pair of rotating nozzles, while the exhaust flow from the Orpheus was split into two and would supply another pair of nozzles at the rear of the engine. This experimental system developed into the Pegasus. Licences to produce the Orpheus were obtained by
Fiat S.p.A. Fiat S.p.A., or ''Fabbrica Italiana Automobili Torino'' (Italian Automobile Factory of Turin), was an Italian holding company whose original and core activities were in the automotive industry, and that was succeeded by Fiat Chrysler Automobi ...
, SNECMA and - as the TJ37 - Curtiss-Wright.


Variants

''Data from Jane's All the World's Aircraft 1962-63''., Aircraft engines of the World 1957 ;BOr.1:First run on 17 December 1954, rated at by Spring 1955, with for take-off later;powered the prototype Folland Gnat. ;BOr.2: for take-off ;BOr.3: for take-off ;BOr.4: for take-off (de-rated) ;BOr.6: ;BOr.11: Upflowed compressor enabled the BOr.11 to develop ;BOr.12: With a simplified reheat system the BOr.12 was rated at dry and with afterburning. ;Mk.100: Derated to ;Mk.101: ;Mk.701: Rated at , the Mk.701 was used in the production
Folland Gnat F Mk.1 The Folland Gnat is a British compact swept-wing subsonic fighter aircraft that was developed and produced by Folland Aircraft. Envisioned as an affordable light fighter in contrast to the rising cost and size of typical combat aircraft, it was ...
for Finland and India. ;Mk.703: Rated at ; powered the
Hindustan HF-24 Marut Mk.1 The HAL HF-24 Marut ("Spirit of the Tempest") was an Indian fighter-bomber aircraft of the 1960s. Developed by Hindustan Aeronautics Limited (HAL), with Kurt Tank as lead designer. The Project Engineer from HAL was George William Benjamin. It i ...
. ;Mk.703R: Reheated Mk.703 rated at powered the production version of the
Hindustan HF-24 Marut The HAL HF-24 Marut ("Spirit of the Tempest") was an Indian fighter-bomber aircraft of the 1960s. Developed by Hindustan Aeronautics Limited (HAL), with Kurt Tank as lead designer. The Project Engineer from HAL was George William Benjamin. It i ...
. Reheat system developed by Hindustan Aeronautics Limited ;Mk.801: Rated at , powering G.91s. The Mk.801 was identical to the BOr.2 engine except for accessories. ;Mk.803: With improvements to the compressor, rated at , replaced earlier marks used in G.91s. ;Mk.805: de-rated to , powered Fuji T1F1 prototype and T-1A production aircraft, as well as the
Hunting H.126 The Hunting H.126 was an experimental aircraft designed and built by British aviation company Hunting Aircraft. The aircraft was developed in order to test the performance of blown flaps, which were commonly known in Britain as "jet flaps", At ...
jet-flap research aircraft. ;FIAT 4023: Mk.803 engines Licence built by FIAT. ;FIAT 4023: Mk.803 engines Licence built by FIAT with added fire detection system.


Applications

;Aircraft *
Breguet Taon Breguet or Bréguet may refer to: * Breguet (watch), watch manufacturer **Abraham-Louis Breguet (1747–1823), Swiss watchmaker **Louis-François-Clement Breguet (1804–1883), French physicist, watchmaker, electrical and telegraph work * Bréguet ...
*
Fiat G.91 The Fiat G.91 is an Italian jet fighter aircraft designed and built by Fiat Aviazione, which later merged into Aeritalia. The G.91 has its origins in the NATO-organised NBMR-1 competition in 1953, which sought a light fighter-bomber (offici ...
* Folland Gnat * Fuji T-1 *
HAL HF-24 Marut The HAL HF-24 Marut ("Spirit of the Tempest") was an Indian fighter-bomber aircraft of the 1960s. Developed by Hindustan Aeronautics Limited (HAL), with Kurt Tank as lead designer. The Project Engineer from HAL was George William Benjamin. It ...
*
Helwan HA-300 The Helwan HA-300 ( ar, حلوان ٣٠٠) was a single-engine, delta-wing, light supersonic interceptor aircraft developed in Egypt during the 1960s. At various stages, Spain and India were involved in the development program. Spain was fina ...
*
Hunting H.126 The Hunting H.126 was an experimental aircraft designed and built by British aviation company Hunting Aircraft. The aircraft was developed in order to test the performance of blown flaps, which were commonly known in Britain as "jet flaps", At ...
* Short SB5 ;Other applications Orpheus engines, numbers 709 (destroyed by FOD in testing) and 711 (running) powered the Bluebird K7 hydroplane in which Donald Campbell was killed whilst attempting the water speed record on
Lake Coniston Lake Coniston (21 February 1991 – 29 May 2014) was an Irish-bred, British-trained Thoroughbred racehorse and sire. After being sold as a yearling for 22,000 guineas he was sent to be trained in England by Geoff Lewis. Unraced as a juvenile, h ...
in 1967. A dragster powered by an Orpheus, the "Vampire", is the current holder of the
British land speed record The British land speed record is the fastest land speed achieved by a vehicle in the United Kingdom, as opposed to one on water or in the air. It is standardised as the speed over a course of fixed length, averaged over two runs in opposite direc ...
.


Engines on display

Preserved Bristol Siddeley Orpheus engines are on display at
Aerospace Bristol Aerospace Bristol is an aerospace museum at Filton, to the north of Bristol, England, U.K. The project is run by the Bristol Aero Collection Trust and houses a varied collection of exhibits, including Concorde ''Alpha Foxtrot'', the final Conco ...
, at the Midland Air Museum, Coventry, and at Solent Sky, Southampton. One is also preserved as a relic in India's first aerospace museum in Hindustan Aerospace Heritage Centre, Bangalore.


Specifications (Orpheus BOr.3 / Mk.803)


See also


Notes


References


External links


Flight Global online archive - Detailed description of the Orpheus, November 1957.


a 1959 ''Flight'' article {{Bristol aeroengines 1950s turbojet engines Orpheus