Boltzmann’s Constant

The Boltzmann constant ( or ) is the proportionality factor that relates the average relative kinetic energy of particles in a gas with the thermodynamic temperature of the gas. It occurs in the definitions of the kelvin and the gas constant, and in Planck's law of black-body radiation and Boltzmann's entropy formula, and is used in calculating thermal noise in resistors. The Boltzmann constant has dimensions of energy divided by temperature, the same as entropy. It is named after the Austrian scientist Ludwig Boltzmann.

As part of the 2019 redefinition of SI base units, the Boltzmann constant is one of the seven " defining constants" that have been given exact definitions. They are used in various combinations to define the seven SI base units. The Boltzmann constant is defined to be exactly .

Roles of the Boltzmann constant

Macroscopically, the ideal gas law states that, for an ideal gas, the product of pressure and volume is proportional to the product of amount of substance (in moles) and absolute temperature :
:$pV = nRT ,$
where is the molar gas constant (). Introducing the Boltzmann constant as the gas constant per molecule transforms the ideal gas law into an alternative form:
:$p V = N k T ,$
where is the number of molecules of gas.

Role in the equipartition of energy

Given a thermodynamic system at an absolute temperature , the average thermal energy carried by each microscopic degree of freedom in the system is (i.e., about , or , at room temperature). This is generally true only for classical systems with a large number of particles, and in which quantum effects are negligible.

In classical statistical mechanics, this average is predicted to hold exactly for homogeneous ideal gases. Monatomic ideal gases (the six noble gases) possess three degrees of freedom per atom, corresponding to the three spatial directions. According to the equipartition of energy this means that there is a thermal energy of per atom. This corresponds very well with experimental data. The thermal energy can be used to calculate the root-mean-square speed of the atoms, which turns out to be inversely proportional to the square root of the atomic mass. The root mean square speeds found at room temperature accurately reflect this, ranging from for helium, down to for xenon.

Kinetic theory gives the average pressure for an ideal gas as
:$p = \frac\frac m \overline.$
Combination with the ideal gas law
:$p V = N k T$
shows that the average translational kinetic energy is
:$\tfracm \overline = \tfrac k T.$
Considering that the translational motion velocity vector has three degrees of freedom (one for each dimension) gives the average energy per degree of freedom equal to one third of that, i.e. .

The ideal gas equation is also obeyed closely by molecular gases; but the form for the heat capacity is more complicated, because the molecules possess additional internal degrees of freedom, as well as the three degrees of freedom for movement of the molecule as a whole. Diatomic gases, for example, possess a total of six degrees of simple freedom per molecule that are related to atomic motion (three translational, two rotational, and one vibrational). At lower temperatures, not all these degrees of freedom may fully participate in the gas heat capacity, due to quantum mechanical limits on the availability of excited states at the relevant thermal energy per molecule.

Role in Boltzmann factors

More generally, systems in equilibrium at temperature have probability of occupying a state with energy weighted by the corresponding Boltzmann factor:
:$P_i \propto \frac,$
where is the partition function. Again, it is the energy-like quantity that takes central importance.

Consequences of this include (in addition to the results for ideal gases above) the Arrhenius equation in chemical kinetics.

Role in the statistical definition of entropy

In statistical mechanics, the entropy of an isolated system at thermodynamic equilibrium is defined as the natural logarithm of , the number of distinct microscopic states available to the system given the macroscopic constraints (such as a fixed total energy ):
:$S = k \,\ln W.$

This equation, which relates the microscopic details, or microstates, of the system (via ) to its macroscopic state (via the entropy ), is the central idea of statistical mechanics. Such is its importance that it is inscribed on Boltzmann's tombstone.

The constant of proportionality serves to make the statistical mechanical entropy equal to the classical thermodynamic entropy of Clausius:
:$\Delta S = \int \frac.$

One could choose instead a rescaled dimensionless entropy in microscopic terms such that
:$, \quad \Delta S' = \int \frac.$

This is a more natural form and this rescaled entropy exactly corresponds to Shannon's subsequent information entropy.

The characteristic energy is thus the energy required to increase the rescaled entropy by one nat.

The thermal voltage

In semiconductors, the Shockley diode equation—the relationship between the flow of electric current and the electrostatic potential across a p–n junction—depends on a characteristic voltage called the ''thermal voltage'', denoted by . The thermal voltage depends on absolute temperature as
$V_\mathrm = ,$
where is the magnitude of the electrical charge on the electron with a value Equivalently,
$= \approx 8.61733034 \times 10^\ \mathrm.$

At room temperature , is approximately which can be derived by plugging in the values as follows:

$V_\mathrm= =\frac \simeq 25.85\ \mathrm$

At the standard state temperature of , it is approximately . The thermal voltage is also important in plasmas and electrolyte solutions (e.g. the Nernst equation); in both cases it provides a measure of how much the spatial distribution of electrons or ions is affected by a boundary held at a fixed voltage.

History

The Boltzmann constant is named after its 19th century Austrian discoverer, Ludwig Boltzmann. Although Boltzmann first linked entropy and probability in 1877, the relation was never expressed with a specific constant until Max Planck first introduced , and gave a more precise value for it (, about 2.5% lower than today's figure), in his derivation of the law of black-body radiation in 1900–1901.. English translation: Before 1900, equations involving Boltzmann factors were not written using the energies per molecule and the Boltzmann constant, but rather using a form of the gas constant , and macroscopic energies for macroscopic quantities of the substance. The iconic terse form of the equation on Boltzmann's tombstone is in fact due to Planck, not Boltzmann. Planck actually introduced it in the same work as his eponymous .

In 1920, Planck wrote in his Nobel Prize lecture:

This "peculiar state of affairs" is illustrated by reference to one of the great scientific debates of the time. There was considerable disagreement in the second half of the nineteenth century as to whether atoms and molecules were real or whether they were simply a heuristic tool for solving problems. There was no agreement whether ''chemical'' molecules, as measured by atomic weights, were the same as ''physical'' molecules, as measured by kinetic theory. Planck's 1920 lecture continued:

In versions of SI prior to the 2019 redefinition of the SI base units, the Boltzmann constant was a measured quantity rather than a fixed value. Its exact definition also varied over the years due to redefinitions of the kelvin (see ) and other SI base units (see ).

In 2017, the most accurate measures of the Boltzmann constant were obtained by acoustic gas thermometry, which determines the speed of sound of a monatomic gas in a triaxial ellipsoid chamber using microwave and acoustic resonances. This decade-long effort was undertaken with different techniques by several laboratories; it is one of the cornerstones of the 2019 redefinition of SI base units. Based on these measurements, the CODATA recommended to be the final fixed value of the Boltzmann constant to be used for the International System of Units.

Value in different units

Since is a proportionality factor between temperature and energy, its numerical value depends on the choice of units for energy and temperature. The small numerical value of the Boltzmann constant in SI units means a change in temperature by 1 K only changes a particle's energy by a small amount. A change of is defined to be the same as a change of . The characteristic energy is a term encountered in many physical relationships.

The Boltzmann constant sets up a relationship between wavelength and temperature (dividing ''hc''/''k'' by a wavelength gives a temperature) with one micrometer being related to , and also a relationship between voltage and temperature (multiplying the voltage by ''k'' in units of eV/K) with one volt being related to . The ratio of these two temperatures,  /  ≈ 1.239842, is the numerical value of ''hc'' in units of eV⋅μm.

Natural units

The Boltzmann constant provides a mapping from this characteristic microscopic energy to the macroscopic temperature scale . In fundamental physics this mapping is often simplified by using the natural units of setting to unity. This convention means that temperature and energy quantities have the same dimensions. In particular the SI unit kelvin becomes superfluous, being defined in terms of joules as . With this convention temperature is always given in units of energy and the Boltzmann constant is not explicitly needed in formulas.

This convention simplifies many physical relationships and formulas. For example, the equipartition formula for the energy associated with each classical degree of freedom ($\tfrac k T$ above) becomes
:$E_ = \tfrac T$
As another example the definition of thermodynamic entropy coincides with the form of information entropy:
:$S = - \sum_i P_i \ln P_i.$
where is the probability of each microstate.

See also

* CODATA 2018
* Thermodynamic beta

Notes

References

External links

Draft Chapter 2 for SI Brochure, following redefinitions of the base units
(prepared by the Consultative Committee for Units)

{{DEFAULTSORT:Boltzmann Constant
Constant
Fundamental constants
Statistical mechanics
Thermodynamics