Ashford Power Station
   HOME

TheInfoList



OR:

Ashford Power Station refers to any of three, engine-driven, electricity generating stations located in Ashford, Kent. Two of the stations, A and B, have been demolished, and one is an operational 21 MW peaking plant.


Ashford A

Ashford A power station (also known as Ashford Electricity Works) was located in Victoria Road, Ashford. It was adjacent to, and south of, the London to Dover railway, 575 metres north west of
Ashford International railway station Ashford International railway station is a National Rail station in Ashford, Kent, England. It connects several railway lines, including High Speed 1 and the South Eastern Main Line. Services are operated by Southeastern and Southern. The s ...
. The power station was built in 1923 to provide electricity to the town of Ashford. It was initially owned and operated by ''Ashford Urban District Council''. The plant consisted of Ruston vertical oil engines coupled to three 300 kW and one 700 kW
English Electric N.º UIC: 9094 110 1449-3 (Takargo Rail) The English Electric Company Limited (EE) was a British industrial manufacturer formed after the Armistice of 11 November 1918, armistice of World War I by amalgamating five businesses which, during th ...
alternators. There was also one Davey-Paxman 8-cylinder oil engine coupled to a 450 kW English Electric alternator. The total electricity generating capacity was 2.05 MW. The alternators generated electricity at 6.6 kV,
Alternating Current Alternating current (AC) is an electric current which periodically reverses direction and changes its magnitude continuously with time in contrast to direct current (DC) which flows only in one direction. Alternating current is the form in whic ...
, 3-phase,
50 Hz The utility frequency, (power) line frequency (American English) or mains frequency (British English) is the nominal frequency of the oscillations of alternating current (AC) in a wide area synchronous grid transmitted from a power station to th ...
, and supplied electricity through
transformer A transformer is a passive component that transfers electrical energy from one electrical circuit to another circuit, or multiple circuits. A varying current in any coil of the transformer produces a varying magnetic flux in the transformer' ...
sub-stations to consumers in the local area. Cooling water for the engines was obtained from, and returned to, cooling water ponds to the south of the site. There were two rectangular fuel oil storage tanks on the north of the site. From 1926 the station continued to be operated by Ashford Council but was under the direction of the
Central Electricity Board The United Kingdom Central Electricity Board (CEB) was established by the Electricity (Supply) Act 1926. It had the duty to supply electricity to authorised electricity undertakers, to determine which power stations would be 'selected' stations ...
. Upon
nationalisation Nationalization (nationalisation in British English) is the process of transforming privately-owned assets into public assets by bringing them under the public ownership of a national government or state. Nationalization usually refers to pri ...
of the British electricity industry in 1948 ownership was vested in the
British Electricity Authority The British Electricity Authority (BEA) was established as the central British electricity authority in 1948 under the nationalisation of Great Britain's electricity supply industry enacted by the Electricity Act 1947. The BEA was responsible for ...
(1948–55), then the
Central Electricity Authority The Central Electricity Authority (CEA) was a body that managed and operated the electricity supply industry in England and Wales between 1 April 1955 and 31 December 1957. The CEA replaced the earlier British Electricity Authority (BEA) as a r ...
(1955–57), and finally in the
Central Electricity Generating Board The Central Electricity Generating Board (CEGB) was responsible for electricity generation, transmission and bulk sales in England and Wales from 1958 until privatisation of the electricity industry in the 1990s. It was established on 1 Januar ...
(CEGB) from 1958. The power station operator lived in a house (Lindum House) on the site. The electricity output from the station, over the period 1946–67 was as follows.GEGB ''Annual report and accounts'', various years In 1954 the station used 100 tons of fuel. The
thermal efficiency In thermodynamics, the thermal efficiency (\eta_) is a dimensionless performance measure of a device that uses thermal energy, such as an internal combustion engine, steam turbine, steam engine, boiler, furnace, refrigerator, ACs etc. For a he ...
of the station in 1961 was 25.64 per cent. In 1966 the plant generating capacity was down-rated to 1.3 MW.  Ashford A station was decommissioned in late 1967 and was subsequently demolished.


Ashford B

Ashford B power station was built in 1954 adjacent to the A station. It was designed, built and operated by the British Electricity Authority. Ownership was transferred to the Central Electricity Authority in 1955, and finally to the CEGB in 1958. The prime movers were diesel internal combustion engines connected to alternators. The plant comprised five 2.0 MW
Mirrlees Mirrlees is a surname. Notable people with the surname include: *Hope Mirrlees (1887–1978), English translator, poet and novelist *James Mirrlees (born 1936), Scottish economist See also * MAN Diesel MAN Diesel SE was a German manufacturer of ...
, Bickerton and Day
diesel Diesel may refer to: * Diesel engine, an internal combustion engine where ignition is caused by compression * Diesel fuel, a liquid fuel used in diesel engines * Diesel locomotive, a railway locomotive in which the prime mover is a diesel engin ...
generating sets. The contract with Mirrlees was valued at £200,000. Three of the sets were commissioned in October 1954, and the remaining two in the August 1955. The output capacity of the completed B station was 10 MW. The
Brush A brush is a common tool with bristles, wire or other filaments. It generally consists of a handle or block to which filaments are affixed in either a parallel or perpendicular orientation, depending on the way the brush is to be gripped durin ...
alternators generated electricity at 6.760 kV AC, 3-phase, 50 Hz. Cooling of the plant was by a single film induced-draught timber
cooling tower A cooling tower is a device that rejects waste heat to the atmosphere through the cooling of a coolant stream, usually a water stream to a lower temperature. Cooling towers may either use the evaporation of water to remove process heat and ...
; the cooling water flow was 160,050 gallons per hour (202 litres/s). The electricity output from the station, in GWh, over the period 1955–81 was as follows. The thermal efficiency of the station in 1961 was 33.97 per cent. In 1972 the average load was 31.9 per cent of the maximum output capacity. In 1973 the CEGB applied for planning consent to construct an additional generating station on the site of the existing B station.Ashford Generating Station, Kent. Application by the CEGB, The National Archive, Kew, Reference: POWE 14/2637 A
public inquiry A tribunal of inquiry is an official review of events or actions ordered by a government body. In many common law countries, such as the United Kingdom, Republic of Ireland, Ireland, Australia and Canada, such a public inquiry differs from a royal ...
was held in July 1974. In the light of the oil crisis of 1973–74 and the consequent economic downturn the plans were not developed any further. The B station was decommissioned in 1981 and was subsequently demolished. All that remains (in 2019) on the site are the concrete foundations of the buildings.


Ashford Peaking Plant

AMP Clean Energy Limited (formerly Ashford Power, UK) commissioned a 21 MW
peaking plant Peaking power plants, also known as peaker plants, and occasionally just "peakers", are power plants that generally run only when there is a high demand, known as peak demand, for electricity. Because they supply power only occasionally, the power ...
in May 2018. Design and construction of the station on the Kingsnorth industrial estate (TR 00511 40888) in Ashford was managed by Clarke Energy. The plant comprises 14 gas engine and alternator sets, each delivering 1.5 MW of electricity. The engines are GE Jensbacher gas engines fuelled by
natural gas Natural gas (also called fossil gas or simply gas) is a naturally occurring mixture of gaseous hydrocarbons consisting primarily of methane in addition to various smaller amounts of other higher alkanes. Low levels of trace gases like carbo ...
. The plant is started-up as requested by the national grid at times of peak demand. This is expected to be for 1,500 to 2,000 hours per year. The plant is unattended and is operated and monitored remotely.


Other developments

In August 2018 Henwood Power Ltd applied for planning permission to build a new Short Term Operating Reserve (STOR) electricity power station on the Henwood industrial estate in Ashford. This would comprise nine natural gas-fired engines located within a former cold store building. The planning application was withdrawn by the applicant in September 2018.


References

{{reflist Demolished power stations in the United Kingdom Former power stations in England Natural gas-fired power stations in England Ashford, Kent