HOME

TheInfoList



OR:

In
mathematics Mathematics is an area of knowledge that includes the topics of numbers, formulas and related structures, shapes and the spaces in which they are contained, and quantities and their changes. These topics are represented in modern mathematics ...
, the inequality of arithmetic and geometric means, or more briefly the AM–GM inequality, states that the
arithmetic mean In mathematics and statistics, the arithmetic mean ( ) or arithmetic average, or just the ''mean'' or the ''average'' (when the context is clear), is the sum of a collection of numbers divided by the count of numbers in the collection. The colle ...
of a list of non-negative
real number In mathematics, a real number is a number that can be used to measure a ''continuous'' one-dimensional quantity such as a distance, duration or temperature. Here, ''continuous'' means that values can have arbitrarily small variations. Every real ...
s is greater than or equal to the
geometric mean In mathematics, the geometric mean is a mean or average which indicates a central tendency of a set of numbers by using the product of their values (as opposed to the arithmetic mean which uses their sum). The geometric mean is defined as the ...
of the same list; and further, that the two means are equal
if and only if In logic and related fields such as mathematics and philosophy, "if and only if" (shortened as "iff") is a biconditional logical connective between statements, where either both statements are true or both are false. The connective is bicondi ...
every number in the list is the same (in which case they are both that number). The simplest non-trivial case – i.e., with more than one variable – for two non-negative numbers and , is the statement that :\frac2 \ge \sqrt with equality if and only if . This case can be seen from the fact that the square of a real number is always non-negative (greater than or equal to zero) and from the elementary case of the
binomial formula In elementary algebra, the binomial theorem (or binomial expansion) describes the algebraic expansion of powers of a binomial. According to the theorem, it is possible to expand the polynomial into a sum involving terms of the form , where the ...
: :\begin 0 & \le (x-y)^2 \\ & = x^2-2xy+y^2 \\ & = x^2+2xy+y^2 - 4xy \\ & = (x+y)^2 - 4xy. \end Hence , with equality precisely when , i.e. . The AM–GM inequality then follows from taking the positive square root of both sides and then dividing both sides by ''2''. For a geometrical interpretation, consider a
rectangle In Euclidean plane geometry, a rectangle is a quadrilateral with four right angles. It can also be defined as: an equiangular quadrilateral, since equiangular means that all of its angles are equal (360°/4 = 90°); or a parallelogram containi ...
with sides of length  and , hence it has
perimeter A perimeter is a closed path that encompasses, surrounds, or outlines either a two dimensional shape or a one-dimensional length. The perimeter of a circle or an ellipse is called its circumference. Calculating the perimeter has several pract ...
and
area Area is the quantity that expresses the extent of a region on the plane or on a curved surface. The area of a plane region or ''plane area'' refers to the area of a shape A shape or figure is a graphics, graphical representation of an obje ...
 . Similarly, a
square In Euclidean geometry, a square is a regular quadrilateral, which means that it has four equal sides and four equal angles (90-degree angles, π/2 radian angles, or right angles). It can also be defined as a rectangle with two equal-length adj ...
with all sides of length has the perimeter and the same area as the rectangle. The simplest non-trivial case of the AM–GM inequality implies for the perimeters that and that only the square has the smallest perimeter amongst all rectangles of equal area. Extensions of the AM–GM inequality are available to include weights or
generalized mean In mathematics, generalized means (or power mean or Hölder mean from Otto Hölder) are a family of functions for aggregating sets of numbers. These include as special cases the Pythagorean means (arithmetic, geometric, and harmonic means). De ...
s.


Background

The ''
arithmetic mean In mathematics and statistics, the arithmetic mean ( ) or arithmetic average, or just the ''mean'' or the ''average'' (when the context is clear), is the sum of a collection of numbers divided by the count of numbers in the collection. The colle ...
'', or less precisely the ''average'', of a list of numbers is the sum of the numbers divided by : :\frac. The ''
geometric mean In mathematics, the geometric mean is a mean or average which indicates a central tendency of a set of numbers by using the product of their values (as opposed to the arithmetic mean which uses their sum). The geometric mean is defined as the ...
'' is similar, except that it is only defined for a list of ''nonnegative'' real numbers, and uses multiplication and a
root In vascular plants, the roots are the organs of a plant that are modified to provide anchorage for the plant and take in water and nutrients into the plant body, which allows plants to grow taller and faster. They are most often below the sur ...
in place of addition and division: :\sqrt If , this is equal to the
exponential Exponential may refer to any of several mathematical topics related to exponentiation, including: *Exponential function, also: **Matrix exponential, the matrix analogue to the above * Exponential decay, decrease at a rate proportional to value *Exp ...
of the arithmetic mean of the
natural logarithm The natural logarithm of a number is its logarithm to the base of the mathematical constant , which is an irrational and transcendental number approximately equal to . The natural logarithm of is generally written as , , or sometimes, if ...
s of the numbers: :\exp \left( \frac \right).


The inequality

Restating the inequality using mathematical notation, we have that for any list of nonnegative real numbers , :\frac \ge \sqrt ,, and that equality holds if and only if .


Geometric interpretation

In two dimensions, is the
perimeter A perimeter is a closed path that encompasses, surrounds, or outlines either a two dimensional shape or a one-dimensional length. The perimeter of a circle or an ellipse is called its circumference. Calculating the perimeter has several pract ...
of a rectangle with sides of length  and . Similarly, is the perimeter of a square with the same
area Area is the quantity that expresses the extent of a region on the plane or on a curved surface. The area of a plane region or ''plane area'' refers to the area of a shape A shape or figure is a graphics, graphical representation of an obje ...
, , as that rectangle. Thus for the AM–GM inequality states that a rectangle of a given area has the smallest perimeter if that rectangle is also a square. The full inequality is an extension of this idea to dimensions. Every vertex of an -dimensional box is connected to edges. If these edges' lengths are , then is the total length of edges incident to the vertex. There are vertices, so we multiply this by ; since each edge, however, meets two vertices, every edge is counted twice. Therefore, we divide by  and conclude that there are edges. There are equally many edges of each length and lengths; hence there are edges of each length and the total of all edge lengths is . On the other hand, :2^(x_1+\ldots+x_n)= 2^ n \sqrt /math> is the total length of edges connected to a vertex on an -dimensional cube of equal volume, since in this case . Since the inequality says : \ge \sqrt it can be restated by multiplying through by to obtain :2^(x_1 + x_2 + \cdots + x_n) \ge 2^ n \sqrt /math> with equality if and only if . Thus the AM–GM inequality states that only the -cube has the smallest sum of lengths of edges connected to each vertex amongst all -dimensional boxes with the same volume.


Examples


Example 1

If a,b,c>0, then the A.M.-G.M. tells us that :(1+a)(1+b)(1+c)\ge 8\sqrt


Example 2

A simple upper bound for n! can be found. AM-GM tells us :1+2+\dots+n \ge n\sqrt /math> :\frac \ge n\sqrt /math> and so :\left(\frac\right)^n \ge n! with equality at n=1. Equivalently, :(n+1)^n \ge 2^nn!


Example 3

Consider the function :f(x,y,z) = \frac + \sqrt + \sqrt /math> for all positive real numbers , and . Suppose we wish to find the minimal value of this function. It can be rewritten as: : \begin f(x,y,z) &= 6 \cdot \frac\\ &=6\cdot\frac \end with : x_1=\frac,\qquad x_2=x_3=\frac \sqrt,\qquad x_4=x_5=x_6=\frac \sqrt Applying the AM–GM inequality for , we get : \begin f(x,y,z) &\ge 6 \cdot \sqrt \ &= 6 \cdot \sqrt \ &= 2^ \cdot 3^. \end Further, we know that the two sides are equal exactly when all the terms of the mean are equal: :f(x,y,z) = 2^ \cdot 3^ \quad \mbox \quad \frac = \frac \sqrt = \frac \sqrt All the points satisfying these conditions lie on a half-line starting at the origin and are given by :(x,y,z)=\biggr(t,\sqrt sqrt\,t,\frac\,t\biggr)\quad\mbox\quad t>0.


Practical applications

An important practical application in
financial mathematics Mathematical finance, also known as quantitative finance and financial mathematics, is a field of applied mathematics, concerned with mathematical modeling of financial markets. In general, there exist two separate branches of finance that require ...
is to computing the
rate of return In finance, return is a profit on an investment. It comprises any change in value of the investment, and/or cash flows (or securities, or other investments) which the investor receives from that investment, such as interest payments, coupons, ca ...
: the
annualized return In finance, return is a profit on an investment. It comprises any change in value of the investment, and/or cash flows (or securities, or other investments) which the investor receives from that investment, such as interest payments, coupons, ...
, computed via the geometric mean, is less than the average annual return, computed by the arithmetic mean (or equal if all returns are equal). This is important in analyzing
investment Investment is the dedication of money to purchase of an asset to attain an increase in value over a period of time. Investment requires a sacrifice of some present asset, such as time, money, or effort. In finance, the purpose of investing i ...
s, as the average return overstates the cumulative effect.


Proofs of the AM–GM inequality


Proof using Jensen's inequality

Jensen's inequality In mathematics, Jensen's inequality, named after the Danish mathematician Johan Jensen, relates the value of a convex function of an integral to the integral of the convex function. It was proved by Jensen in 1906, building on an earlier pr ...
states that the value of a
concave function In mathematics, a concave function is the negative of a convex function. A concave function is also synonymously called concave downwards, concave down, convex upwards, convex cap, or upper convex. Definition A real-valued function f on an in ...
of an arithmetic mean is greater than or equal to the arithmetic mean of the function's values. Since the logarithm function is concave, we have :\log \left(\frac \right) \geq \sum \frac \log x_i = \sum \left( \log x_i^\right) = \log \left( \prod x_i^\right). Taking antilogs of the far left and far right sides, we have the AM–GM inequality.


Proof by successive replacement of elements

We have to show that :\alpha = \frac \ge \sqrt \beta with equality only when all numbers are equal. If not all numbers are equal, then there exist x_i,x_j such that x_i<\alpha. Replacing by \alpha and by (x_i+x_j-\alpha) will leave the arithmetic mean of the numbers unchanged, but will increase the geometric mean because :\alpha(x_j+x_i-\alpha)-x_ix_j=(\alpha-x_i)(x_j-\alpha)>0 If the numbers are still not equal, we continue replacing numbers as above. After at most (n-1) such replacement steps all the numbers will have been replaced with \alpha while the geometric mean strictly increases at each step. After the last step, the geometric mean will be \sqrt \alpha, proving the inequality. It may be noted that the replacement strategy works just as well from the right hand side. If any of the numbers is 0 then so will the geometric mean thus proving the inequality trivially. Therefore we may suppose that all the numbers are positive. If they are not all equal, then there exist x_i,x_j such that 0. Replacing x_i by \beta and x_j by \fracleaves the geometric mean unchanged but strictly decreases the arithmetic mean since :x_i + x_j - \beta - \frac\beta = \frac\beta > 0. The proof then follows along similar lines as in the earlier replacement.


Induction proofs


Proof by induction #1

Of the non-negative real numbers , the AM–GM statement is equivalent to :\alpha^n\ge x_1 x_2 \cdots x_n with equality if and only if for all . For the following proof we apply mathematical induction and only well-known rules of arithmetic. Induction basis: For the statement is true with equality. Induction hypothesis: Suppose that the AM–GM statement holds for all choices of non-negative real numbers. Induction step: Consider non-negative real numbers , . Their arithmetic mean satisfies : (n+1)\alpha=\ x_1 + \cdots + x_n + x_. If all the are equal to , then we have equality in the AM–GM statement and we are done. In the case where some are not equal to , there must exist one number that is greater than the arithmetic mean , and one that is smaller than . Without loss of generality, we can reorder our in order to place these two particular elements at the end: and . Then :x_n - \alpha > 0\qquad \alpha-x_>0 :\implies (x_n-\alpha)(\alpha-x_)>0\,.\qquad(*) Now define with :y:=x_n+x_-\alpha\ge x_n-\alpha>0\,, and consider the numbers which are all non-negative. Since :(n+1)\alpha=x_1 + \cdots + x_ + x_n + x_ :n\alpha=x_1 + \cdots + x_ + \underbrace_, Thus, is also the arithmetic mean of numbers and the induction hypothesis implies :\alpha^=\alpha^n\cdot\alpha\ge x_1x_2 \cdots x_ y\cdot\alpha.\qquad(**) Due to (*) we know that :(\underbrace_)\alpha-x_nx_=(x_n-\alpha)(\alpha-x_)>0, hence :y\alpha>x_nx_\,,\qquad() in particular . Therefore, if at least one of the numbers is zero, then we already have strict inequality in (**). Otherwise the right-hand side of (**) is positive and strict inequality is obtained by using the estimate (***) to get a lower bound of the right-hand side of (**). Thus, in both cases we can substitute (***) into (**) to get :\alpha^>x_1x_2 \cdots x_ x_nx_\,, which completes the proof.


Proof by induction #2

First of all we shall prove that for real numbers and there follows : x_1 + x_2 > x_1x_2+1. Indeed, multiplying both sides of the inequality by , gives : x_2 - x_1x_2 > 1 - x_1, whence the required inequality is obtained immediately. Now, we are going to prove that for positive real numbers satisfying , there holds :x_1 + \cdots + x_n \ge n. The equality holds only if . Induction basis: For the statement is true because of the above property. Induction hypothesis: Suppose that the statement is true for all natural numbers up to . Induction step: Consider natural number , i.e. for positive real numbers , there holds . There exists at least one , so there must be at least one . Without loss of generality, we let and . Further, the equality we shall write in the form of . Then, the induction hypothesis implies :(x_1 + \cdots + x_) + (x_ x_n ) > n - 1. However, taking into account the induction basis, we have :\begin x_1 + \cdots + x_ + x_ + x_n & = (x_1 + \cdots + x_) + (x_ + x_n ) \\ &> (x_1 + \cdots + x_) + x_ x_n + 1 \\ & > n, \end which completes the proof. For positive real numbers , let's denote :x_1 = \frac, . . ., x_n = \frac. The numbers satisfy the condition . So we have :\frac + \cdots + \frac \ge n, whence we obtain :\fracn \ge \sqrt with the equality holding only for .


Proof by Cauchy using forward–backward induction

The following proof by cases relies directly on well-known rules of arithmetic but employs the rarely used technique of forward-backward-induction. It is essentially from Augustin Louis Cauchy and can be found in his '' Cours d'analyse''.


The case where all the terms are equal

If all the terms are equal: :x_1 = x_2 = \cdots = x_n, then their sum is , so their arithmetic mean is ; and their product is , so their geometric mean is ; therefore, the arithmetic mean and geometric mean are equal, as desired.


The case where not all the terms are equal

It remains to show that if ''not'' all the terms are equal, then the arithmetic mean is greater than the geometric mean. Clearly, this is only possible when . This case is significantly more complex, and we divide it into subcases.


= The subcase where ''n'' = 2

= If , then we have two terms, and , and since (by our assumption) not all terms are equal, we have: :\begin \Bigl(\frac\Bigr)^2-x_1x_2 &=\frac14(x_1^2+2x_1x_2+x_2^2)-x_1x_2\\ &=\frac14(x_1^2-2x_1x_2+x_2^2)\\ &=\Bigl(\frac\Bigr)^2>0, \end hence : \frac \ge \sqrt as desired.


= The subcase where ''n'' = 2''k''

= Consider the case where , where is a positive integer. We proceed by mathematical induction. In the base case, , so . We have already shown that the inequality holds when , so we are done. Now, suppose that for a given , we have already shown that the inequality holds for , and we wish to show that it holds for . To do so, we apply the inequality twice for numbers and once for numbers to obtain: : \begin \frac & =\frac \\ pt& \ge \frac \\ pt& \ge \sqrt \\ pt& = \sqrt ^k\end where in the first inequality, the two sides are equal only if :x_1 = x_2 = \cdots = x_ and :x_ = x_ = \cdots = x_ (in which case the first arithmetic mean and first geometric mean are both equal to , and similarly with the second arithmetic mean and second geometric mean); and in the second inequality, the two sides are only equal if the two geometric means are equal. Since not all numbers are equal, it is not possible for both inequalities to be equalities, so we know that: :\frac \ge \sqrt ^k/math> as desired.


= The subcase where ''n'' < 2''k''

= If is not a natural power of , then it is certainly ''less'' than some natural power of 2, since the sequence is unbounded above. Therefore, without loss of generality, let be some natural power of that is greater than . So, if we have terms, then let us denote their arithmetic mean by , and expand our list of terms thus: :x_ = x_ = \cdots = x_m = \alpha. We then have: : \begin \alpha & = \frac \\ pt& = \frac \\ pt& = \frac \\ pt& = \frac \\ pt& = \frac \\ pt& \ge \sqrt \\ pt& = \sqrt ,, \end so :\alpha^m \ge x_1 x_2 \cdots x_n \alpha^ and :\alpha \ge \sqrt /math> as desired.


Proof by induction using basic calculus

The following proof uses mathematical induction and some basic
differential calculus In mathematics, differential calculus is a subfield of calculus that studies the rates at which quantities change. It is one of the two traditional divisions of calculus, the other being integral calculus—the study of the area beneath a curve. ...
. Induction basis: For the statement is true with equality. Induction hypothesis: Suppose that the AM–GM statement holds for all choices of non-negative real numbers. Induction step: In order to prove the statement for non-negative real numbers , we need to prove that :\frac - ()^\ge0 with equality only if all the numbers are equal. If all numbers are zero, the inequality holds with equality. If some but not all numbers are zero, we have strict inequality. Therefore, we may assume in the following, that all numbers are positive. We consider the last number as a variable and define the function : f(t)=\frac - ()^,\qquad t>0. Proving the induction step is equivalent to showing that for all , with only if and  are all equal. This can be done by analyzing the critical points of  using some basic calculus. The first derivative of is given by :f'(t)=\frac-\frac()^t^,\qquad t>0. A critical point has to satisfy , which means :()^t_0^=1. After a small rearrangement we get :t_0^=()^, and finally :t_0=()^, which is the geometric mean of . This is the only critical point of . Since for all , the function  is strictly convex and has a strict
global minimum In mathematical analysis, the maxima and minima (the respective plurals of maximum and minimum) of a function, known collectively as extrema (the plural of extremum), are the largest and smallest value of the function, either within a given ran ...
at . Next we compute the value of the function at this global minimum: : \begin f(t_0) &= \frac - ()^()^\\ &= \frac + \frac()^ - ()^\\ &= \frac - \frac()^\\ &= \frac\Bigl(\fracn - ()^\Bigr) \\ &\ge0, \end where the final inequality holds due to the induction hypothesis. The hypothesis also says that we can have equality only when are all equal. In this case, their geometric mean   has the same value, Hence, unless are all equal, we have . This completes the proof. This technique can be used in the same manner to prove the generalized AM–GM inequality and
Cauchy–Schwarz inequality The Cauchy–Schwarz inequality (also called Cauchy–Bunyakovsky–Schwarz inequality) is considered one of the most important and widely used inequalities in mathematics. The inequality for sums was published by . The corresponding inequality fo ...
in Euclidean space .


Proof by Pólya using the exponential function

George Pólya provided a proof similar to what follows. Let for all real , with first derivative and second derivative . Observe that , and for all real , hence is strictly convex with the absolute minimum at . Hence for all real  with equality only for . Consider a list of non-negative real numbers . If they are all zero, then the AM–GM inequality holds with equality. Hence we may assume in the following for their arithmetic mean . By -fold application of the above inequality, we obtain that :\begin &\le \\ & = \exp \Bigl( \frac - 1 + \frac - 1 + \cdots + \frac - 1 \Bigr), \qquad (*) \end with equality if and only if for every . The argument of the exponential function can be simplified: :\begin \frac - 1 + \frac - 1 + \cdots + \frac - 1 & = \frac - n \\ & = \frac - n \\ & = 0. \end Returning to , :\frac \le e^0 = 1, which produces , hence the result :\sqrt \le \alpha.


Proof by Lagrangian multipliers

If any of the x_i are 0, then there is nothing to prove. So we may assume all the x_i are strictly positive. Because the arithmetic and geometric means are homogeneous of degree 1, without loss of generality assume that \prod_^n x_i = 1. Set G(x_1,x_2,\ldots,x_n)=\prod_^n x_i, and F(x_1,x_2,\ldots,x_n) = \frac\sum_^n x_i. The inequality will be proved (together with the equality case) if we can show that the minimum of F(x_1,x_2,...,x_n), subject to the constraint G(x_1,x_2,\ldots,x_n) = 1, is equal to 1, and the minimum is only achieved when x_1 = x_2 = \cdots = x_n = 1. Let us first show that the constrained minimization problem has a global minimum. Set K = \. Since the intersection K \cap \ is compact, the extreme value theorem guarantees that the minimum of F(x_1,x_2,...,x_n) subject to the constraints G(x_1,x_2,\ldots,x_n) = 1 and (x_1,x_2,\ldots,x_n) \in K is attained at some point inside K. On the other hand, observe that if any of the x_i > n, then F(x_1,x_2,\ldots,x_n) > 1 , while F(1,1,\ldots,1) = 1, and (1,1,\ldots,1) \in K \cap \ . This means that the minimum inside K \cap \ is in fact a global minimum, since the value of F at any point inside K \cap \ is certainly no smaller than the minimum, and the value of F at any point (y_1,y_2,\ldots, y_n) not inside K is strictly bigger than the value at (1,1,\ldots,1), which is no smaller than the minimum. The method of Lagrange multipliers says that the global minimum is attained at a point (x_1,x_2,\ldots,x_n) where the gradient of F(x_1,x_2,\ldots,x_n) is \lambda times the gradient of G(x_1,x_2,\ldots,x_n), for some \lambda. We will show that the only point at which this happens is when x_1 = x_2 = \cdots = x_n = 1 and F(x_1,x_2,...,x_n) = 1. Compute \frac = \frac and \frac = \prod_x_j = \frac = \frac along the constraint. Setting the gradients proportional to one another therefore gives for each i that \frac = \frac, and so n\lambda= x_i. Since the left-hand side does not depend on i, it follows that x_1 = x_2 = \cdots = x_n, and since G(x_1,x_2,\ldots, x_n) = 1, it follows that x_1 = x_2 = \cdots = x_n = 1 and F(x_1,x_2,\ldots,x_n) = 1, as desired.


Generalizations


Weighted AM–GM inequality

There is a similar inequality for the weighted arithmetic mean and weighted geometric mean. Specifically, let the nonnegative numbers and the nonnegative weights be given. Set . If , then the inequality : \frac \ge \sqrt /math> holds with equality if and only if all the with are equal. Here the convention is used. If all , this reduces to the above inequality of arithmetic and geometric means.


Proof using Jensen's inequality

Using the finite form of
Jensen's inequality In mathematics, Jensen's inequality, named after the Danish mathematician Johan Jensen, relates the value of a convex function of an integral to the integral of the convex function. It was proved by Jensen in 1906, building on an earlier pr ...
for the
natural logarithm The natural logarithm of a number is its logarithm to the base of the mathematical constant , which is an irrational and transcendental number approximately equal to . The natural logarithm of is generally written as , , or sometimes, if ...
, we can prove the inequality between the weighted arithmetic mean and the weighted geometric mean stated above. Since an with weight has no influence on the inequality, we may assume in the following that all weights are positive. If all are equal, then equality holds. Therefore, it remains to prove strict inequality if they are not all equal, which we will assume in the following, too. If at least one is zero (but not all), then the weighted geometric mean is zero, while the weighted arithmetic mean is positive, hence strict inequality holds. Therefore, we may assume also that all are positive. Since the natural logarithm is strictly concave, the finite form of Jensen's inequality and the functional equations of the natural logarithm imply :\begin \ln\Bigl(\fracw\Bigr) & >\fracw\ln x_1+\cdots+\fracw\ln x_n \\ & =\ln \sqrt \end Since the natural logarithm is
strictly increasing In mathematics, a monotonic function (or monotone function) is a function between ordered sets that preserves or reverses the given order. This concept first arose in calculus, and was later generalized to the more abstract setting of order ...
, : \fracw >\sqrt


Matrix arithmetic–geometric mean inequality

Most matrix generalizations of the arithmetic geometric mean inequality apply on the level of unitarily invariant norms, owing to the fact that even if the matrices A and B are positive semi-definite the matrix A B may not be positive semi-definite and hence may not have a canonical square root. In Bhatia and Kittaneh proved that for any unitarily invariant norm , , , \cdot, , , and positive semi-definite matrices A and B it is the case that : , , , AB, , , \leq \frac, , , A^2 + B^2, , , Later, in the same authors proved the stronger inequality that : , , , AB, , , \leq \frac, , , (A+B)^2, , , Finally, it is known for dimension n=2 that the following strongest possible matrix generalization of the arithmetic-geometric mean inequality holds, and it is conjectured to hold for all n : , , , (AB)^, , , \leq \frac, , , A+B, , , This conjectured inequality was shown by Stephen Drury in 2012. Indeed, he proved :\sqrt\leq \frac\lambda_j(A+B), \ j=1, \ldots, n. S.W. Drury, On a question of Bhatia and Kittaneh, Linear Algebra Appl. 437 (2012) 1955–1960.


Other generalizations

Other generalizations of the inequality of arithmetic and geometric means include: *
Muirhead's inequality In mathematics, Muirhead's inequality, named after Robert Franklin Muirhead, also known as the "bunching" method, generalizes the inequality of arithmetic and geometric means. Preliminary definitions ''a''-mean For any real number, real vector sp ...
, * Maclaurin's inequality, *
Generalized mean inequality In mathematics, generalized means (or power mean or Hölder mean from Otto Hölder) are a family of functions for aggregating sets of numbers. These include as special cases the Pythagorean means (arithmetic mean, arithmetic, geometric mean, ge ...
, *
Means of complex numbers Means may refer to: * Means LLC, an anti-capitalist media worker cooperative * Means (band), a Christian hardcore band from Regina, Saskatchewan * Means, Kentucky, a town in the US * Means (surname) * Means Johnston Jr. (1916–1989), US Navy admi ...
.cf. Iordanescu, R.; Nichita, F.F.; Pasarescu, O. Unification Theories: Means and Generalized Euler Formulas. Axioms 2020, 9, 144.


See also

*
Hoffman's packing puzzle Hoffman's packing puzzle is an assembly puzzle named after Dean G. Hoffman, who described it in 1978. The puzzle consists of 27 identical rectangular cuboids, each of whose edges have three different lengths. Its goal is to assemble them all to ...
*
Ky Fan inequality In mathematics, there are two different results that share the common name of the Ky Fan inequality. One is an inequality involving the geometric mean and arithmetic mean of two sets of real numbers of the unit interval. The result was published on ...
*
Young's inequality for products In mathematics, Young's inequality for products is a mathematical inequality about the product of two numbers. The inequality is named after William Henry Young and should not be confused with Young's convolution inequality. Young's inequality f ...


References


External links

* {{DEFAULTSORT:Inequality Of Arithmetic And Geometric Means Inequalities Means Articles containing proofs