5 nm process

In semiconductor manufacturing, the International Roadmap for Devices and Systems defines the "5 nm" process as the MOSFET technology node following the "7 nm" node. In 2020, Samsung and TSMC entered volume production of "5 nm" chips, manufactured for companies including Apple, Huawei, Mediatek, Qualcomm and Marvell.

The term "5 nm" does not indicate that any physical feature (such as gate length, metal pitch or gate pitch) of the transistors is five nanometers in size. Historically, the number used in the name of a technology node represented the gate length, but it started deviating from the actual length to smaller numbers (by Intel) around 2011. According to the projections contained in the 2021 update of the International Roadmap for Devices and Systems published by IEEE Standards Association Industry Connection, the 5 nm node is expected to have a gate length of 18 nm, a contacted gate pitch of 51 nm, and a tightest metal pitch of 30 nm. In real world commercial practice, "5 nm" is used primarily as a marketing term by individual microchip manufacturers to refer to a new, improved generation of silicon semiconductor chips in terms of increased transistor density (i.e. a higher degree of miniaturization), increased speed and reduced power consumption compared to the previous 7 nm process.

History

Background

Quantum tunnelling effects through the gate oxide layer on "7 nm" and "5 nm" transistors became increasingly difficult to manage using existing semiconductor processes. Single-transistor devices below 7 nm were first demonstrated by researchers in the early 2000s. In 2002, an IBM research team including Bruce Doris, Omer Dokumaci, Meikei Ieong and Anda Mocuta fabricated a 6-nanometre silicon-on-insulator (SOI) MOSFET.

In 2003, a Japanese research team at NEC, led by Hitoshi Wakabayashi and Shigeharu Yamagami, fabricated the first 5 nm MOSFET.

In 2015, IMEC and Cadence fabricated 5 nm test chips. The fabricated test chips were not fully functional devices, but rather are to evaluate patterning of interconnect layers.

In 2015, Intel described a lateral nanowire (or gate-all-around) FET concept for the "5 nm" node.

In 2017, IBM revealed that it had created "5 nm" silicon chips, using silicon nanosheets in a ''gate-all-around'' configuration (GAAFET), a break from the usual FinFET design. The GAAFET transistors used had 3 nanosheets stacked on top of each other, covered in their entirety by the same gate, just like FinFETs usually have several physical fins side by side that are electrically a single unit and are covered in their entirety by the same gate. IBM's chip measured 50 mm² and had 600 million transistors per mm², for a total of 30 billion transistors (1667 nm² per transistor or 41 nm actual transistor spacing).

Commercialization

In April 2019, Samsung Electronics announced they had been offering their "5 nm" process (5LPE) tools to their customers since 2018 Q4. In April 2019, TSMC announced that their "5 nm" process (CLN5FF, N5) had begun risk production, and that full chip design specifications were now available to potential customers. The N5 process can use EUVL on up to 14 layers, compared to only 5 or 4 layers in N6 and N7++. For the expected 28 nm minimum metal pitch, SALELE is the proposed best patterning method.

For their "5 nm" process, Samsung started process defect mitigation by automated check and fix, due to occurrence of stochastic (random) defects in the metal and via layers.

In October 2019, TSMC reportedly started sampling 5 nm A14 processors for Apple. At the 2020 IEEE IEDM conference, TSMC reported their 5 nm process had 1.84x higher density than their 7nm process. At IEDM 2019, TSMC revealed two versions of 5 nm, a DUV version with a 5.5-track cell, and an (official) EUV version with a 6-track cell.

In December 2019, TSMC announced an average yield of approximately 80%, with a peak yield per wafer of over 90% for their "5 nm" test chips with a die size of 17.92 mm². In mid 2020 TSMC claimed its (N5) "5 nm" process offered 1.8x the density of its "7 nm" N7 process, with 15% speed improvement or 30% lower power consumption; an improved sub-version (N5P or N4) was claimed to improve on N5 with +5% speed or -10% power.

On 13 October 2020, Apple announced a new iPhone 12 lineup using the A14. Together with the Huawei Mate 40 lineup using the HiSilicon Kirin 9000, the A14 and Kirin 9000 were the first devices to be commercialized on TSMC's "5 nm" node. Later, on 10 November 2020, Apple also revealed three new Mac models using the Apple M1, another 5 nm chip. According to Semianalysis, the A14 processor has a transistor density of 134 million transistors per mm².

In October 2021, TSMC introduced a new member of its "5 nm" process family: N4P. Compared to N5, the node offered 11% higher performance (6% higher vs N4), 22% higher power efficiency, 6% higher transistor density and lower mask count. TSMC expected first tapeouts by the second half of 2022.

In December 2021, TSMC announced a new member of its "5 nm" process family designed for HPC applications: N4X. The process featured optimized transistor design and structures, reduced resistance and capacitance of targeted metal layers and high-density MiM capacitors. The process was expected at that time to offer up to 15% higher performance vs N5 (or up to 4% vs N4P) at 1.2 V and supply voltage in excess of 1.2 V. TSMC, at that time, said that they expected N4X to enter risk production by the first half of 2023.

In June 2022, Intel presented some details about the Intel 4 process (known as "7 nm" before renaming in 2021): the company's first process to use EUV, 2x higher transistor density compared to Intel 7 (known as "10 nm" ESF (Enhanced Super Fin) before the renaming), use of cobalt-clad copper for the finest five layers of interconnect, 21.5% higher performance at iso power or 40% lower power at iso frequency at 0.65 V compared to Intel 7 etc. Intel's first product to be fabbed on Intel 4 was Meteor Lake, powered on in Q2 2022 and scheduled for shipping in 2023. Intel 4 has contacted gate pitch of 50 nm, both fin and minimum metal pitch of 30 nm, and library height of 240 nm. Metal-insulator-metal capacitance was increased to 376 fF/μm², roughly 2x compared to Intel 7. The process was optimized for HPC applications and supported voltage from <0.65 V to >1.3 V. WikiChip's transistor density estimate for Intel 4 was 123.4 Mtr./mm², 2.04x from 60.5 Mtr./mm² for Intel 7. However, high-density SRAM cell had scaled only by 0.77x (from 0.0312 to 0.024 μm²) and high-performance cell by 0.68x (from 0.0441 to 0.03 μm²) compared to Intel 7.

On 27 September 2022, AMD officially launched their Ryzen 7000 series of central processing units, based on the TSMC N5 process and Zen 4 microarchitecture. Zen 4 marked the first utilization of the 5 nm process for x86-based desktop processors. In December 2022 AMD also launched the Radeon RX 7000 series of graphics processing units based on RDNA 3, which also used the TSMC N5 process.

On 26 August 2024 IBM introduced their Telum II processor, based on Samsung's 5 nm process.

Nodes

4 nm process nodes

Transistor gate pitch is also referred to as CPP (contacted poly pitch) and interconnect pitch is also referred to as MMP (minimum metal pitch).

Beyond 4 nm

"3 nm" is the usual term for the next node after "5 nm". , TSMC has started producing chips for select customers, while Samsung and Intel have plans for 2024.

"3.5 nm" has also been given as a name for the first node beyond "5 nm".

References

External links

5 nm lithography process

{{DEFAULTSORT:5 nanometre
*00005
Japanese inventions
Application-specific integrated circuits