|
Trivial File Transfer Protocol
Trivial File Transfer Protocol (TFTP) is a simple lockstep File Transfer Protocol which allows a client to get a file from or put a file onto a remote host. One of its primary uses is in the early stages of nodes booting from a local area network. TFTP has been used for this application because it is very simple to implement. TFTP was first standardized in 1981 and the current specification for the protocol can be found in . Overview Due to its simple design, TFTP can be easily implemented by code with a small memory footprint. It is therefore the protocol of choice for the initial stages of any network booting strategy like BOOTP, PXE, BSDP, etc., when targeting from highly resourced computers to very low resourced Single-board computers (SBC) and System on a Chip (SoC). It is also used to transfer firmware images and configuration files to network appliances like routers, firewalls, IP phones, etc. Today, TFTP is virtually unused for Internet transfers. TFTP's design was i ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Lockstep (computing)
Lockstep systems are fault-tolerant computer systems that run the same set of operations at the same time in parallel. The redundancy (duplication) allows error detection and error correction: the output from lockstep operations can be compared to determine if there has been a fault if there are at least two systems (dual modular redundancy), and the error can be automatically corrected if there are at least three systems (triple modular redundancy), via majority vote. The term "lockstep" originates from army usage, where it refers to synchronized walking, in which marchers walk as closely together as physically practical. To run in lockstep, each system is set up to progress from one well-defined state to the next well-defined state. When a new set of inputs reaches the system, it processes them, generates new outputs and updates its state. This set of changes (new inputs, new outputs, new state) is considered to define that step, and must be treated as an atomic transaction; in ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
PARC Universal Packet Protocol Suite
The PARC Universal Packet (commonly abbreviated to PUP or PuP, although the original documents usually use Pup) was one of the two earliest internetworking protocol suites; it was created by researchers at Xerox PARC in the mid-1970s. (Technically, the name "PUP" only refers to the internetwork-level protocol, but it is also applied to the whole protocol suite.) The entire suite provided routing and packet delivery, as well as higher level functions such as a reliable byte stream, along with numerous applications. History The PUP protocol was created in roughly the same time frame as the earliest parts of the development of TCP/IP for the Internet and also the same time period as the early Ethernet local area network at PARC. The fundamental design of the PUP suite was substantially complete by 1974. In the 1980s Xerox used PUP as the base for the Xerox Network Systems (XNS) protocol suite; some of the protocols in the XNS suite (such as the Internetwork Datagram Protocol) were li ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
User Datagram Protocol
In computer networking, the User Datagram Protocol (UDP) is one of the core communication protocols of the Internet protocol suite used to send messages (transported as datagrams in packets) to other hosts on an Internet Protocol (IP) network. Within an IP network, UDP does not require prior communication to set up communication channels or data paths. UDP uses a simple connectionless communication model with a minimum of protocol mechanisms. UDP provides checksums for data integrity, and port numbers for addressing different functions at the source and destination of the datagram. It has no handshaking dialogues, and thus exposes the user's program to any unreliability of the underlying network; there is no guarantee of delivery, ordering, or duplicate protection. If error-correction facilities are needed at the network interface level, an application may instead use Transmission Control Protocol (TCP) or Stream Control Transmission Protocol (SCTP) which are designed for this ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
ASCII
ASCII ( ), abbreviated from American Standard Code for Information Interchange, is a character encoding standard for electronic communication. ASCII codes represent text in computers, telecommunications equipment, and other devices. Because of technical limitations of computer systems at the time it was invented, ASCII has just 128 code points, of which only 95 are , which severely limited its scope. All modern computer systems instead use Unicode, which has millions of code points, but the first 128 of these are the same as the ASCII set. The Internet Assigned Numbers Authority (IANA) prefers the name US-ASCII for this character encoding. ASCII is one of the List of IEEE milestones, IEEE milestones. Overview ASCII was developed from telegraph code. Its first commercial use was as a seven-bit teleprinter code promoted by Bell data services. Work on the ASCII standard began in May 1961, with the first meeting of the American Standards Association's (ASA) (now the American Nat ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Well-known Port
This is a list of TCP and UDP port numbers used by protocols for operation of network applications. The Transmission Control Protocol (TCP) and the User Datagram Protocol (UDP) only need one port for duplex, bidirectional traffic. They usually use port numbers that match the services of the corresponding TCP or UDP implementation, if they exist. The Internet Assigned Numbers Authority (IANA) is responsible for maintaining the official assignments of port numbers for specific uses. However, many unofficial uses of both well-known and registered port numbers occur in practice. Similarly, many of the official assignments refer to protocols that were never or are no longer in common use. This article lists port numbers and their associated protocols that have experienced significant uptake. Table legend Well-known ports The port numbers in the range from 0 to 1023 (0 to 210 − 1) are the ''well-known ports'' or ''system ports''. They are used by system processes that provide w ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
UDP/IP
In computer networking, the User Datagram Protocol (UDP) is one of the core communication protocols of the Internet protocol suite used to send messages (transported as datagrams in packets) to other hosts on an Internet Protocol (IP) network. Within an IP network, UDP does not require prior communication to set up communication channels or data paths. UDP uses a simple connectionless communication model with a minimum of protocol mechanisms. UDP provides checksums for data integrity, and port numbers for addressing different functions at the source and destination of the datagram. It has no handshaking dialogues, and thus exposes the user's program to any unreliability of the underlying network; there is no guarantee of delivery, ordering, or duplicate protection. If error-correction facilities are needed at the network interface level, an application may instead use Transmission Control Protocol (TCP) or Stream Control Transmission Protocol (SCTP) which are designed for this ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
