|
SR U1 Class
The SR U1 class were three-cylinder 2-6-0 ('mogul') steam locomotives designed by Richard Maunsell for passenger duties on the Southern Railway. The fifth member of the Maunsell "family" of standardised moguls and 2-6-4 locomotives, the U1 was the final development of the Maunsell mogul, and marked a continuation of the basic principles established by CME George Jackson Churchward for the GWR. Developed from Maunsell's previous SR U class design, the U1 class shared characteristics with Churchward's GWR 4300 Class. The U1 prototype was a rebuild of the unique 3-cylinder SR K1 ("River") class 2-6-4 tank locomotive, becoming operational in June 1928. The design was part of a drive to create a standard fleet of locomotives using parts interchangeable with other Maunsell-designed classes. The three smaller cylinders increased their route availability over the 2-cylinder U class.Banks, pp. 66-67 The K1 rebuild featured a variant of the Gresley conjugated valve gear, p ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Richard Maunsell
Richard Edward Lloyd Maunsell (pronounced "Mansell") (26 May 1868 – 7 March 1944) held the post of chief mechanical engineer (CME) of the South Eastern and Chatham Railway from 1913 until the 1923 Grouping and then the post of CME of the Southern Railway in England until 1937. He had previously worked his way up through positions in other railways in Ireland, England and India. Biography He was born on 26 May 1868 at Raheny, County Dublin, in Ireland, the seventh son of John Maunsell, a Justice of the Peace and a prominent solicitor in Dublin. He attended The Royal School, Armagh from 1882 to 1886. He commenced studies at Trinity College, Dublin on 23 October 1886 for a law degree; however by this stage he had shown a keen interest in engineering. He concurrently began an apprenticeship at the Inchicore works of the Great Southern and Western Railway (GS&WR) under H. A. Ivatt in 1888. Following completion of his degree in January 1891 he was able to complete his appr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
GWR 4300 Class
The Great Western Railway (GWR) 4300 Class is a class of 2-6-0 (mogul) steam locomotives, designed by G.J. Churchward for mixed traffic duties. 342 were built from 1911–1932. Background In 1906 Churchward fitted a more powerful Standard No. 4 boiler to his successful 3100 Class 2-6-2T to create the GWR 3150 Class. These showed themselves to be successful locomotives but their weight and water capacity meant that they tended to be restricted to suburban passenger traffic. Churchward was looking forward to the replacement of various of his predecessor’s 2-4-0 classes on secondary duties. In 1911 he therefore designed a tender version of the 3150 class which would be suitable for a wide range of intermediate duties. Design The class was ‘a total synthesis of standard parts, using the outside cylinders of the Saint, the wheels of ‘31XX’ 2-6-2 tank and the No. 4 boiler, in its superheated form.’ No prototype was required as the fundamental design had proved itse ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Swindon
Swindon () is a town and unitary authority with Borough status in the United Kingdom, borough status in Wiltshire, England. As of the 2021 Census, the population of Swindon was 201,669, making it the largest town in the county. The Swindon unitary authority area had a population of 233,410 as of 2021. Located in South West England, the town lies between Bristol, 35 miles (56 kilometres) to its west, and Reading, Berkshire, Reading, equidistant to its east. Recorded in the 1086 Domesday Book as ''Suindune'', it was a small market town until the mid-19th century, when it was selected as the principal site for the Great Western Railway's repair and maintenance Swindon Works, works, leading to a marked increase in its population. The new town constructed for the railway workers produced forward-looking amenities such as the UK’s first lending library and a ‘cradle-to-grave' health care centre that was later used as a blueprint for the National Health Service, NHS. After the W ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Sir Nigel Gresley
Sir Herbert Nigel Gresley (19 June 1876 – 5 April 1941) was a British railway engineer. He was one of Britain's most famous steam locomotive engineers, who rose to become Chief Mechanical Engineer (CME) of the London and North Eastern Railway (LNER). He was the designer of some of the most famous steam locomotives in Britain, including the LNER Class A1 and LNER Class A4 4-6-2 Pacific engines. An A1 Pacific, '' Flying Scotsman'', was the first steam locomotive officially recorded over 100 mph in passenger service, and an A4, number 4468 ''Mallard'', still holds the record for being the fastest steam locomotive in the world (126 mph). Gresley's engines were considered elegant, both aesthetically and mechanically. His invention of a three-cylinder design with only two sets of Walschaerts valve gear, the Gresley conjugated valve gear, produced smooth running and power at lower cost than would have been achieved with a more conventional three sets of Walschaerts gea ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Valve Gear
The valve gear of a steam engine is the mechanism that operates the inlet and exhaust valves to admit steam into the cylinder and allow exhaust steam to escape, respectively, at the correct points in the cycle. It can also serve as a reversing gear. It is sometimes referred to as the "motion". Purpose In the simple case, this can be a relatively simple task as in the internal combustion engine in which the valves always open and close at the same points. This is not the ideal arrangement for a steam engine, though, because greatest power is achieved by keeping the inlet valve open throughout the power stroke (thus having full boiler pressure, minus transmission losses, against the piston throughout the stroke) while peak efficiency is achieved by only having the inlet valve open for a short time and then letting the steam expand in the cylinder (expansive working). The point at which steam stops being admitted to the cylinder is known as the '' cutoff'', and the optimal positio ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Hammerblow (railway)
In rail terminology, hammer blow or dynamic augment is a vertical force which alternately adds to and subtracts from the locomotive's weight on a wheel. It is transferred to the track by the driving wheels of many steam locomotives. It is an out-of-balance force on the wheel (known as overbalance). It is the result of a compromise when a locomotive's wheels are unbalanced to off-set horizontal reciprocating masses, such as connecting rods and pistons, to improve the ride. The hammer blow may cause damage to the locomotive and track if the wheel/rail force is high enough. Principles The addition of extra weights on the wheels reduces the unbalanced reciprocating forces on the locomotive but causes it to be out of balance vertically creating hammer blow. Locomotives were balanced to their individual cases, especially if several of the same design were constructed (a class). Each class member was balanced for its normal operating speed. Between 40% and 50% of the reciprocating weigh ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
James Clayton (engineer)
James Clayton MBE (17 November 1872 – 12 October 1946) was an English mechanical engineer who worked extensively on railway locomotives. Clayton was born in Stockport, Cheshire and attended the Technical School in Manchester and thereafter served an apprenticeship at Beyer Peacock, becoming a draughtsman in their drawing office. After six years in that post he took a position with the South Eastern and Chatham Railway (SECR). In 1904, he left for a year's work with the Motor Manufacturing Company, an automobile manufacturer in Coventry, as their chief draughtsman and assistant works manager. Following this, he was hired by Cecil Paget, Chief Superintendent of the Midland Railway, to work on his high pressure multi-cylinder locomotive. During his time with the Midland, he spent two years in charge of the casualty and investigation section, and was appointed Assistant Chief Locomotive Draughtsman in 1907. In 1914, he rejoined the SECR and was soon Chief Locomotive Draugh ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Ramsgate
Ramsgate is a seaside resort, seaside town in the district of Thanet District, Thanet in east Kent, England. It was one of the great English seaside towns of the 19th century. In 2001 it had a population of about 40,000. In 2011, according to the Census, there was a population of 40,408. Ramsgate's main attraction is its coastline, and its main industries are tourism and fishing. The town has one of the largest marinas on the English south coast, and the Port of Ramsgate provided cross-English channel, channel ferries for many years. History Ramsgate began as a fishing and farming hamlet. The Christian missionary Augustine of Canterbury, St Augustine, sent by Pope Gregory I, Pope Gregory the Great, landed near Ramsgate in 597AD. The town is home to the Pugin's Church and Shrine of St Augustine, Shrine of St Augustine. The earliest reference to the town is in the Kent Hundred Rolls of 1274–5, both as ''Remmesgate'' (in the local personal name of ‘Christina de Remmesgate ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
London
London is the capital and largest city of England and the United Kingdom, with a population of just under 9 million. It stands on the River Thames in south-east England at the head of a estuary down to the North Sea, and has been a major settlement for two millennia. The City of London, its ancient core and financial centre, was founded by the Romans as '' Londinium'' and retains its medieval boundaries.See also: Independent city § National capitals The City of Westminster, to the west of the City of London, has for centuries hosted the national government and parliament. Since the 19th century, the name "London" has also referred to the metropolis around this core, historically split between the counties of Middlesex, Essex, Surrey, Kent, and Hertfordshire, which largely comprises Greater London, governed by the Greater London Authority.The Greater London Authority consists of the Mayor of London and the London Assembly. The London Mayor is distinguished fr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Loading Gauge
A loading gauge is a diagram or physical structure that defines the maximum height and width dimensions in railway vehicles and their loads. Their purpose is to ensure that rail vehicles can pass safely through tunnels and under bridges, and keep clear of platforms, trackside buildings and structures. Classification systems vary between different countries, and gauges may vary across a network, even if the track gauge is uniform. The term loading gauge can also be applied to the maximum size of road vehicles in relation to tunnels, overpasses and bridges, and doors into automobile repair shops, bus garages, filling stations, residential garages, multi-storey car parks and warehouses. A related but separate gauge is the structure gauge, which sets limits to the extent that bridges, tunnels and other infrastructure can encroach on rail vehicles. The difference between these two gauges is called the clearance. The specified amount of clearance makes allowance for wobbling of ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Harold Holcroft
Harold Holcroft (12 February 1882 – 15 February 1973) was an English railway and mechanical engineer who worked for the Great Western Railway (GWR), the South Eastern and Chatham Railway (SECR) and the Southern Railway (SR). At the GWR, Holcroft helped the Chief Mechanical Engineer (CME), George Jackson Churchward, design the 4300 class 2-6-0 Moguls, and took the design principles for this class of locomotive with him when he moved to the SECR. Here, he worked as Assistant to Richard Maunsell and was involved with the design of the Maunsell Moguls, transferring to the Southern Railway when it was created by the amalgamation of the SECR with other railways at Grouping in 1923. After Maunsell's retirement in 1937, Holcroft continued to work for the Southern Railway under Oliver Bulleid until his retirement in 1946. Early life, GWR service and Holcroft conjugated valve gear Holcroft was born in Wolverhampton and undertook a premium apprenticeship at the Wolverhampton works of t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
SR N1 Class
The SECR N1 class was a type of 3-cylinder 2-6-0 ('mogul') steam locomotive designed by Richard Maunsell for mixed traffic duties, initially on the South Eastern and Chatham Railway (SECR), and later operated for the Southern Railway (SR). The N1 was a development of the basic principles established by the Great Western Railway's (GWR) Chief Mechanical Engineer (CME) George Jackson Churchward and by Maunsell's previous N class design.Scott-Morgan (2002), p. 18 The N1 prototype was the result of modifications made to N class No. 822 during construction in 1922. The locomotive became operational in 1923 and used parts interchangeable with other Maunsell locomotive classes. The prototype N1 was the only member of the class constructed before the SECR became part of the Southern Railway at the Grouping in 1923, and featured Holcroft conjugated valve gear, Holcroft's experience in this field later aided in the development of the Gresley conjugated valve gear which ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> Richard Maunsell")
