Sauer 202
   HOME
*





Sauer 202
The Sauer 202 is a lightweight bolt-action rifle manufactured by Sauer & Sohn in Germany between 1993 and 2015. The rifle was imported to the US by SIG Arms. This rifle has a modular construction which allowed easy replacement of components and caliber changes. This rifle has a modular barrel-change system allows to change between calibers easily, and was offered in a large selection of calibers. Separate magnum receivers and barrels were made which were not interchangeable with non-magnum calibers. Receiver The standard receiver is made out of steel, but there is also a lightweight version available made of aluminium which weighs 470 grams less. Barrel change system The standard 202 system uses the same receiver for mini and short action cartridges, but different types of bolts.FAQ - Sauer rifles
Sauer use a 3-lug bolt for medium short calibres (.243 ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Bolt-action
Bolt-action is a type of manual firearm action that is operated by ''directly'' manipulating the bolt via a bolt handle, which is most commonly placed on the right-hand side of the weapon (as most users are right-handed). Most bolt-action firearms use a rotating bolt design, where the handle must first be rotated upward to unlock the bolt from the receiver, then pulled back to open the breech and allowing any spent cartridge case to be extracted and ejected. This also cocks the striker within the bolt (either on opening or closing of the bolt depending on the gun design) and engages it against the sear. When the bolt is returned to the forward position, a new cartridge (if available) is pushed out of the magazine and into the barrel chamber, and finally the breech is closed tight by rotating the handle down so the bolt head relocks on the receiver. Bolt-action firearms are generally repeating firearms, but some single-shot breechloaders also use bolt-action design as ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

30-06 Springfield
The .30-06 Springfield cartridge (pronounced "thirty-aught-six" ), 7.62×63mm in metric notation, and called the .30 Gov't '06 by Winchester, was introduced to the United States Army in 1906 and later standardized; it remained in military use until the late 1970s. The ".30" refers to the caliber of the bullet in inches. The "06" refers to the year the cartridge was adopted, 1906. It replaced the .30-03, 6mm Lee Navy, and .30-40 Krag cartridges. The .30-06 remained the U.S. Army's primary rifle and machine gun cartridge for nearly 50 years before being replaced by the 7.62×51mm NATO and 5.56×45mm NATO, both of which remain in current U.S. and NATO service. It remains a very popular sporting round, with ammunition produced by all major manufacturers. History In the early-1890s, the U.S. military adopted the smokeless powder .30-40 Krag rimmed cartridge. The 1894 version of that cartridge used a round-nose bullet. Around 1901, the U.S. started developing an experimental rimles ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Bolt-action Rifles
Bolt-action is a type of manual firearm action that is operated by ''directly'' manipulating the bolt via a bolt handle, which is most commonly placed on the right-hand side of the weapon (as most users are right-handed). Most bolt-action firearms use a rotating bolt design, where the handle must first be rotated upward to unlock the bolt from the receiver, then pulled back to open the breech and allowing any spent cartridge case to be extracted and ejected. This also cocks the striker within the bolt (either on opening or closing of the bolt depending on the gun design) and engages it against the sear. When the bolt is returned to the forward position, a new cartridge (if available) is pushed out of the magazine and into the barrel chamber, and finally the breech is closed tight by rotating the handle down so the bolt head relocks on the receiver. Bolt-action firearms are generally repeating firearms, but some single-shot breechloaders also use bolt-action design as ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Sauer 404
The Sauer 404 is a lightweight bolt-action rifle manufactured by Sauer & Sohn. The rifle was launched in 2015, and is a direct successor of the Sauer 202. It has a modular construction allowing for easy replacement of components and changing between barrels with different chamberings. This 404 is currently made in a large selection of chamberings and a modular barrel-change system allows changing between chamberings. While the 404 has a similar appearance to the 202 on the outside, it has several upgrades and updates, and parts are not necessarily compatible. Some differences are that the 404 has a manual cocking lever instead of a push button safety like on the 202. Unlike the 202, the 404 uses the same receiver for magnum and non-magnum cartridges. Universal tool With the rifle, Sauer introduced the Sauer Universal Tool, also known as the Sauer Universal Key (SUK) or Sauer Universal-Schlüssel (SUS) in German. This is essentially a 5 mm hex key integrated into the front s ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


SIG Sauer 205
{{Infobox weapon , is_ranged = yes , name = SIG Sauer 205 , image = , image_size = , caption = , origin = {{flag, Germany , type = Bolt-action repeating rifle , designer = SIG Sauer , design_date = , manufacturer = J. P. Sauer & Sohn GmbH , service = , used_by = Primarily Swiss sport shooters , production_date = Around 1994 to 2007 , cartridge = 5.56×45mm NATO, 6mm BR, 6.5×55mm, 7.5×55mm Swiss, .308 Winchester, 7.62×51mm NATO, .22 LR , action = Bolt-action , rate = , velocity = 7.5×55mm Swiss: 11.3 gram bullet at 750 m/s , range = Used in Swiss competitions from 100 to 600 meters , height = , width = , weight = {{convert, 5400, g, lbs, abbr=on , length = {{convert, 1150, mm, in, abbr=on (with a 660 mm barrel) , part_length = {{convert, 660, mm, in, 1, abbr=on , feed = 10-round double stack box magazine , sights = Barrel mounted globe sight (optional), 11 mm dovetail rail on receiver for mounting diopter rear sight, or a scope sight, e ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

SIG Sauer 200 STR
The SIG Sauer 200 STR (Scandinavian Target Rifle), also known as the SIG Sauer 200 STR Match, is a bolt-action rifle mostly used as a target/competition rifle for national competitions by Norwegian, Swedish and Danish sport shooters. It is a variant of the Sauer 200 TR or SIG Sauer 200 TR Match rifle that features thicker diameter barrels. The 200 STR is produced by J. P. Sauer & Sohn GmbH in Germany. The Sauer 200 STR rifle has a factory warranty of 15 years, exempting the use of overpressure (handloaded) ammunition—the 6.5×55mm Pmax piezo pressure is set at 380 MPa (55,114 psi) and the .308 Winchester/ 7.62×51mm NATO Pmax piezo pressure is set at 415 MPa (60,191 psi) by Sauer & Sohn following the relevant C.I.P. rulings. Design details Due to the Sauer 200 STR modular design, barrel, chambering, and trigger groups can be relatively easy changed by the user with the help of simple tools. The rifle stocks are however factory fitted to a particular rifle, so stocks can n ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Hex Key
Hex keys of various sizes Socket head screws of various sizes A hex key (also, hex wrench, Allen key and Allen wrench) is a simple driver for bolts or screws that have heads with ''internal'' hexagonal recesses (sockets). Hex keys are formed from a single piece of hard hexagonal steel rod, having blunt ends that fit snugly into similarly-shaped screw sockets. The rods are bent to 90º, forming two arms of unequal length resembling an "L". The tool is usually held and twisted by its long arm, creating a relatively large torque at the tip of the short arm; it can also be held by its short arm to access screws in difficult-to-reach locations and to turn screws faster at the expense of torque. Hex keys are designated with a socket size and are manufactured with tight tolerances. As such, they are commonly sold in kits that include a variety of sizes. Key length typically increases with size, but not necessarily proportionally so. Variants on this design have the short end inse ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

300 Winchester Magnum
The .300 Winchester Magnum (also known as .300 Win Mag or .300 WM) (7.62×67mmB, 7.62x66BR) is a belted, bottlenecked magnum rifle cartridge that was introduced by the Winchester Repeating Arms Company in 1963. The .300 Winchester Magnum is a magnum cartridge designed to fit in a standard rifle action. It is based on the .375 H&H Magnum, which has been blown out, shortened, and necked down to accept a .30 caliber (7.82 mm) bullet.2002, ''Lyman Reloading Handbook, 48th Edition'' The .300 Win Mag is extremely versatile and has been adopted by a wide range of users including big game hunters, target shooters, military units, and law enforcement departments. Many hunters have found the cartridge to be an effective all-around choice with bullet options ranging from the flatter shooting 150 grain to the harder-hitting 200+ grain selections available in factory ammunition. The .300 Win Mag remains the most popular .30 caliber magnum with American hunters, despite being surpasse ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

7mm Remington Magnum
The 7mm Remington Magnum rifle cartridge was introduced as a commercially available round in 1962, along with the new Remington Model 700 bolt-action rifle. It is a member of the belted magnum family that is directly derived from the venerable .375 H&H Magnum.Speer Reloading Manual The original purpose of the belted magnum concept taken from the .300 H&H Magnum and .375 H&H Magnum, was to provide precise headspace control, since the sloping shoulders, while easing cartridge extraction, were unsuitable for this purpose. Improved cartridge extraction reliability is desirable while hunting dangerous game, in particular when a fast follow-up shot is required. The 7mm Remington Magnum is based on the commercial .264 Winchester Magnum, .338 Winchester Magnum, and .458 Winchester Magnum, which were based on the same belted .300 H&H Magnum and .375 H&H Magnum cases, trimmed to nearly the same length as the .270 Weatherby Magnum. History On its introduction, the 7mm Remington Magnu ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

308 Winchester
The .308 Winchester is a smokeless powder rimless bottlenecked rifle cartridge widely used for hunting, target shooting, police, military, and personal protection applications globally. It is similar but not identical to the 7.62×51mm NATO cartridge. History During the 1940s, the .300 Savage became the basis for experiments on behalf of the U.S. military that resulted in the development of the T65 series of experimental cartridges. The original experimental case design by the Frankford Arsenal was designated the T65 and was similar to the .300 Savage case, but with less taper. The experimental cases were made from standard .30-06 Springfield cases which gave a little less capacity than standard .300 Savage cases because the Frankford Arsenal cases had slightly thicker case walls. The later T65 iterations were lengthened compared to the original T65 case and provided a ballistic performance roughly equal to the U.S. military .30-06 Springfield service cartridge. Over forty yea ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]