|
Rock Climbing Hammer
Rock climbing hammers, also known as wall hammers, big wall hammers, or aid hammers, are a type of specialty hammer used mainly in aid climbing for the placement and removal of pitons, copper-heads, and circle-heads. They can also be used in the initial placement of fixed anchors ( bolts) or the forceful removal of stuck free climbing protection. File:Climbing Hammer.png, Chouinard Climbing Hammer File:OutDoor 2018, Friedrichshafen (1X7A0354).jpg, Climbing hammer See also * Bolt * Climbing equipment A wide range of equipment is used during rock or any other type of climbing that includes equipment commonly used to protect a climber against the consequences of a fall. Rope, cord and webbing Climbing ropes are typically of kernmantle c ... * Piton References Climbing equipment {{Climbing-stub ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Aid Climbing
Aid climbing is a style of climbing in which standing on or pulling oneself up via devices attached to fixed or placed protection is used to make upward progress. The term contrasts with free climbing in which progress is made without using artificial aids: a free climber ascends by only holding onto and stepping on natural features of the rock, using rope and equipment merely to catch them in case of fall and provide belay. In general, aid techniques are reserved for pitches where free climbing is difficult to impossible, and extremely steep and long routes demanding great endurance and both physical and mental stamina. While aid climbing places less emphasis on athletic fitness and raw strength than free climbing, the physical demands of hard aid climbing should not be underestimated. In early versions of the Yosemite Decimal System, aid climbing was class 6, but today the YDS uses only classes 1-5. Aid climbing has its own ranking system, using a separate scale from A0 t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Piton
A piton (; also called ''pin'' or ''peg'') in climbing is a metal spike (usually steel) that is driven into a crack or seam in the climbing surface using a climbing hammer, and which acts as an anchor for protecting the climber against the consequences of falling or to assist progress in aid climbing. Pitons are equipped with an eye hole or a ring to which a carabiner is attached; the carabiner can then be directly or indirectly connected to a climbing rope. Pitons were the original form of protection and are still used where there is no alternative. Repeated hammering and extraction of pitons damage the rock, and climbers who subscribe to the clean climbing ethic avoid their use as much as possible. With the popularization of clean climbing in the 1970s, pitons were largely replaced by faster and easier-to-use clean protection, such as nuts and camming devices. Pitons are still found in place (as "fixed" pitons) on some established free climbing routes, as fixed be ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Copperhead (climbing)
In rock climbing, a copperhead is a small nut with a head made of soft metal on a loop of wire, originally copper or brass, later aluminium. Copperheads are most often placed into small shallow seams and crevices by pounding or hammering them in to place, with a climbing hammer, sometimes with the aid of metal rod, chisel, or punch. The malleability of the soft metal head makes copperheads conform to the rock and grip better than other devices, and are often the only protection that will stay fixed in many placements. Their small size and low strength makes them among the poorest kinds of protection; their main use is in aid climbing where a placement that will just support the weight of the climber can be used to make progress, even though it would be useless in a fall. Variations such as Double-heads and Circleheads can also be used. See also * Piton * Bolt * Climbing equipment A wide range of equipment is used during rock or any other type of climbing that include ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bolt (climbing)
In rock climbing, a bolt is a permanent anchor fixed into a hole drilled in the rock as a form of protection. Most bolts are either self-anchoring expansion bolts or fixed in place with liquid resin. Description While bolts are commonplace in rock and gym climbing there is no universal vocabulary to describe them. Generally, a ''bolt hanger'' or a ''fixed hanger'' is a combination of a fixed bolt and a specialized stainless steel hanger designed to accept a carabiner, whereas in certain regions a ''bolt runner'' or a ''carrot'' describes a hangerless bolt (where the climber must provide their own hanger bracket and sometimes lock nut). A ''ring bolt'' has a loop on one end so it presents as a U-shape embedded in the wall. A climbing rope is then clipped into the carabiner. Generally quickdraws or slings are employed between bolt hangers and the rope to reduce drag when ascending, belaying and rappelling. Use Bolts are used in sport climbing as a backup to catch a fall, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Climbing Equipment
A wide range of equipment is used during rock or any other type of climbing that includes equipment commonly used to protect a climber against the consequences of a fall. Rope, cord and webbing Climbing ropes are typically of kernmantle construction, consisting of a core (kern) of long twisted fibres and an outer sheath (mantle) of woven coloured fibres. The core provides about 70% of the tensile strength, while the sheath is a durable layer that protects the core and gives the rope desirable handling characteristics. Ropes used for climbing can be divided into two classes: dynamic ropes and low elongation ropes (sometimes called "static" ropes). Dynamic ropes are designed to absorb the energy of a falling climber, and are usually used as belaying ropes. When a climber falls, the rope stretches, reducing the maximum force experienced by the climber, their belayer, and equipment. Low elongation ropes stretch much less, and are usually used in anchoring systems. They are a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Piton
A piton (; also called ''pin'' or ''peg'') in climbing is a metal spike (usually steel) that is driven into a crack or seam in the climbing surface using a climbing hammer, and which acts as an anchor for protecting the climber against the consequences of falling or to assist progress in aid climbing. Pitons are equipped with an eye hole or a ring to which a carabiner is attached; the carabiner can then be directly or indirectly connected to a climbing rope. Pitons were the original form of protection and are still used where there is no alternative. Repeated hammering and extraction of pitons damage the rock, and climbers who subscribe to the clean climbing ethic avoid their use as much as possible. With the popularization of clean climbing in the 1970s, pitons were largely replaced by faster and easier-to-use clean protection, such as nuts and camming devices. Pitons are still found in place (as "fixed" pitons) on some established free climbing routes, as fixed be ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
