|
Polarity Reversal (seismology)
In reflection seismology, a polarity reversal or phase change is a local amplitude seismic attribute anomaly that can indicate the presence of hydrocarbons and is therefore known as a direct hydrocarbon indicator. It primarily results from the change in polarity of the seismic response when a shale (with a lower acoustic impedance) overlies a brine-saturated zone (with a high acoustic impedance), that becomes invaded with an oil/gas sand (with the lowest acoustic impedance of the three). This changes the acoustic impedance contrast from an increase to a decrease, resulting in the polarity of the seismic response being reversed - as per the normal convention adopted by the SEG. Occurrence For a polarity reversal to occur, the shale has to have a lower acoustic impedance than the water sand and both are required to have a higher acoustic impedance than the oil/gas sand. This is the intermediate situation, that occurs during sediment compaction with depth, between the acousti ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Seismic Polarity Reversal
Seismology (; from Ancient Greek σεισμός (''seismós'') meaning "Earthquake, earthquake" and -λογία (''-logía'') meaning "study of") is the scientific study of earthquakes and the propagation of Linear elasticity#Elastic wave, elastic waves through the Earth or through other planet-like bodies. It also includes studies of earthquake environmental effects such as tsunamis as well as diverse seismic sources such as volcanic, tectonic, glacial, Fluvial seismology, fluvial, oceanic, atmospheric, and artificial processes such as explosions. A related field that uses geology to infer information regarding past earthquakes is paleoseismology. A recording of Earth motion as a function of time is called a seismogram. A seismologist is a scientist who does research in seismology. History Scholarly interest in earthquakes can be traced back to antiquity. Early speculations on the natural causes of earthquakes were included in the writings of Thales of Miletus (c. 585 BCE), Anax ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Reflection Seismology
Reflection seismology (or seismic reflection) is a method of exploration geophysics that uses the principles of seismology to estimate the properties of the Earth's subsurface from reflected seismic waves. The method requires a controlled seismic source of energy, such as dynamite or Tovex blast, a specialized air gun or a seismic vibrator. Reflection seismology is similar to sonar and echolocation. This article is about surface seismic surveys; for vertical seismic profiles, see VSP. History Reflections and refractions of seismic waves at geologic interfaces within the Earth were first observed on recordings of earthquake-generated seismic waves. The basic model of the Earth's deep interior is based on observations of earthquake-generated seismic waves transmitted through the Earth's interior (e.g., Mohorovičić, 1910). The use of human-generated seismic waves to map in detail the geology of the upper few kilometers of the Earth's crust followed shortly thereafter and ha ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Seismic Attribute
In reflection seismology, a seismic attribute is a quantity extracted or derived from seismic data that can be analysed in order to enhance information that might be more subtle in a traditional seismic image, leading to a better geological or geophysical interpretation of the data. Examples of seismic attributes can include measured time, amplitude, frequency and attenuation, in addition to combinations of these. Most seismic attributes are post-stack, but those that use CMP gathers, such as amplitude versus offset (AVO), must be analysed pre-stack.Young, R. & LoPiccolo, R. 2005. AVO analysis demystified. E&P. http://www.e-seis.com/white_papers/AVO%20Analysis%20Demystified.pdf They can be measured along a single seismic trace or across multiple traces within a defined window. The first attributes developed were related to the 1D complex seismic trace and included: envelope amplitude, instantaneous phase, instantaneous frequency, and apparent polarity. Acoustic impedance ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Hydrocarbons
In organic chemistry, a hydrocarbon is an organic compound consisting entirely of hydrogen and carbon. Hydrocarbons are examples of group 14 hydrides. Hydrocarbons are generally colourless and hydrophobic, and their odors are usually weak or exemplified by the odors of gasoline and lighter fluid. They occur in a diverse range of molecular structures and phases: they can be gases (such as methane and propane), liquids (such as hexane and benzene), low melting solids (such as paraffin wax and naphthalene) or polymers (such as polyethylene and polystyrene). In the fossil fuel industries, ''hydrocarbon'' refers to the naturally occurring petroleum, natural gas and coal, and to their hydrocarbon derivatives and purified forms. Combustion of hydrocarbons is the main source of the world's energy. Petroleum is the dominant raw-material source for organic commodity chemicals such as solvents and polymers. Most anthropogenic (human-generated) emissions of greenhouse gases are ca ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Direct Hydrocarbon Indicator
A hydrocarbon indicator (HCI) or direct hydrocarbon indicator (DHI), is an anomalous seismic attribute value or pattern that could be explained by the presence of hydrocarbons in an oil or gas reservoir. DHIs are particularly useful in hydrocarbon exploration for reducing the geological risk of exploration wells. Broadly, geophysicists recognize several types of DHI: * Bright spots: localized amplitudes of greater magnitude than background amplitude values. Equipment prior to the 1970s had the bright spots obscured due to the automatic gain control. * Flat spot A flat spot, or wheel flat, also called spalling or shelling, is a fault in railroad wheel shape. A flat spot occurs when a rail vehicle's wheelset is dragged along the rail after the wheel/axle has stopped rotating. Flat spots are usually cau ...s: nearly horizontal reflectors that cross existing stratigraphy, possibly indicating a hydrocarbon fluid level within an oil or gas reservoir. * Dim spots: low amplitud ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Shale
Shale is a fine-grained, clastic sedimentary rock formed from mud that is a mix of flakes of clay minerals (hydrous aluminium phyllosilicates, e.g. kaolin, Al2 Si2 O5( OH)4) and tiny fragments (silt-sized particles) of other minerals, especially quartz and calcite.Blatt, Harvey and Robert J. Tracy (1996) ''Petrology: Igneous, Sedimentary and Metamorphic'', 2nd ed., Freeman, pp. 281–292 Shale is characterized by its tendency to split into thin layers ( laminae) less than one centimeter in thickness. This property is called '' fissility''. Shale is the most common sedimentary rock. The term ''shale'' is sometimes applied more broadly, as essentially a synonym for mudrock, rather than in the more narrow sense of clay-rich fissile mudrock. Texture Shale typically exhibits varying degrees of fissility. Because of the parallel orientation of clay mineral flakes in shale, it breaks into thin layers, often splintery and usually parallel to the otherwise indistinguishable bedding ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Acoustic Impedance
Acoustic impedance and specific acoustic impedance are measures of the opposition that a system presents to the acoustic flow resulting from an acoustic pressure applied to the system. The SI unit of acoustic impedance is the pascal-second per cubic metre (), or in the MKS system the rayl per square metre (), while that of specific acoustic impedance is the pascal-second per metre (), or in the MKS system the rayl. There is a close analogy with electrical impedance, which measures the opposition that a system presents to the electric current resulting from a voltage applied to the system. Mathematical definitions Acoustic impedance For a linear time-invariant system, the relationship between the acoustic pressure applied to the system and the resulting acoustic volume flow rate through a surface perpendicular to the direction of that pressure at its point of application is given by: : p(t) = * Qt), or equivalently by : Q(t) = * pt), where * ''p'' is the acoustic pressure; * ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Society Of Exploration Geophysicists
The Society of Exploration Geophysicists (SEG) is a learned society dedicated to promoting the science and education of exploration geophysics in particular and geophysics in general. The Society fosters the expert and ethical practice of geophysics in the exploration and development of natural resources, in characterizing the near-surface, and in mitigating earth hazards. SEG has more than 14,000 members working in more than 114 countries. SEG was founded in 1930 in Houston, Texas but its business office has been headquartered in Tulsa, Oklahoma since the mid-1940s. While most SEG members are involved in exploration for petroleum, SEG members also are involved in application of geophysics methods to mineral exploration as well as environmental and engineering problems, archaeology, and other scientific endeavors. SEG publishes ''The Leading Edge'' (''TLE''), a monthly professional magazine, ''Geophysics'', a peer-reviewed archival publication, and ''Interpretation'', a peer-revie ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bright Spot
In reflection seismology, a bright spot is a local high amplitude seismic attribute anomaly that can indicate the presence of hydrocarbons and is therefore known as a direct hydrocarbon indicator. It is used by geophysicists in hydrocarbon exploration. History Bright spots were not commonly identified until the early 1970s because of the extensive and industry-wide use of automatic gain control, which obscured the amplitude effects of hydrocarbon accumulations. Theory A bright spot primarily results from the increase in acoustic impedance Acoustic impedance and specific acoustic impedance are measures of the opposition that a system presents to the acoustic flow resulting from an acoustic pressure applied to the system. The SI unit of acoustic impedance is the pascal-second per cu ... contrast when a hydrocarbon (with a lower acoustic impedance) replaces the brine-saturated zone (with a higher acoustic impedance) that underlies a shale (with a higher acoustic impedance sti ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Dim Spot
In reflection seismology, a dim spot is a local low-amplitude seismic attribute anomaly that can indicate the presence of hydrocarbons and is therefore known as a direct hydrocarbon indicator. It primarily results from the decrease in acoustic impedance contrast when a hydrocarbon (with a low acoustic impedance) replaces the brine-saturated zone (with a high acoustic impedance) that underlies a shale (with the lowest acoustic impedance of the three), decreasing the reflection coefficient. Occurrence For a dim spot to occur, the shale has to have a lower acoustic impedance than both the water sand and the oil/gas sand, which is the opposite situation required for a bright spot In reflection seismology, a bright spot is a local high amplitude seismic attribute anomaly that can indicate the presence of hydrocarbons and is therefore known as a direct hydrocarbon indicator. It is used by geophysicists in hydrocarbon expl ... to occur. This is possible because compaction causes th ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
