HOME
*





Perseverance (Rainhill Trials)
''Perseverance'' was an early steam locomotive that took part in the Rainhill Trials. Built by John Reed Hill of London and Timothy Burstall of Leith; the name of the locomotive was taken from "Persevere", Leith's town motto. ''Perseverance'' was damaged on the way to the trials and Burstall spent the first five days trying to repair his locomotive. It ran on the sixth and final day of the trials but only achieved a speed of 6 mph. Burstall and Hill were awarded a consolation prize of £25. Burstall and Hill used roller bearings for the axles, an important step in locomotive development. The design, adapted from a road-going steam coach Coach may refer to: Guidance/instruction * Coach (sport), a director of athletes' training and activities * Coaching, the practice of guiding an individual through a process ** Acting coach, a teacher who trains performers Transportation * Co ..., incorporated 2 cylinders, a vertical boiler and weighed 2.9 tons. See also * ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Burstall And Hill
Burstall may refer to: Places *Burstall, Saskatchewan, Canada *Burstall, Suffolk Burstall is a village and civil parish in Suffolk, England. Located around west of Ipswich, it is part of Babergh district. The parish includes the hamlet of Burstallhill. Recorded in the Domesday Book as Burgestala / Burghestala. It is in the ..., England Other uses * Burstall (surname) See also * Birstall (other) {{Disambiguation, geo ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Horsepower
Horsepower (hp) is a unit of measurement of power, or the rate at which work is done, usually in reference to the output of engines or motors. There are many different standards and types of horsepower. Two common definitions used today are the mechanical horsepower (or imperial horsepower), which is about 745.7 watts, and the metric horsepower, which is approximately 735.5 watts. The term was adopted in the late 18th century by Scottish engineer James Watt to compare the output of steam engines with the power of draft horses. It was later expanded to include the output power of other types of piston engines, as well as turbines, electric motors and other machinery. The definition of the unit varied among geographical regions. Most countries now use the SI unit watt for measurement of power. With the implementation of the EU Directive 80/181/EEC on 1 January 2010, the use of horsepower in the EU is permitted only as a supplementary unit. History The development of the stea ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Steam Locomotive
A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam. It is fuelled by burning combustible material (usually coal, oil or, rarely, wood) to heat water in the locomotive's boiler to the point where it becomes gaseous and its volume increases 1,700 times. Functionally, it is a steam engine on wheels. In most locomotives, the steam is admitted alternately to each end of its cylinders, in which pistons are mechanically connected to the locomotive's main wheels. Fuel and water supplies are usually carried with the locomotive, either on the locomotive itself or in a tender coupled to it. Variations in this general design include electrically-powered boilers, turbines in place of pistons, and using steam generated externally. Steam locomotives were first developed in the United Kingdom during the early 19th century and used for railway transport until the middle of the 20th century. Richard Trevithick ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


John Reed Hill
John is a common English name and surname: * John (given name) * John (surname) John may also refer to: New Testament Works * Gospel of John, a title often shortened to John * First Epistle of John, often shortened to 1 John * Second Epistle of John, often shortened to 2 John * Third Epistle of John, often shortened to 3 John People * John the Baptist (died c. AD 30), regarded as a prophet and the forerunner of Jesus Christ * John the Apostle (lived c. AD 30), one of the twelve apostles of Jesus * John the Evangelist, assigned author of the Fourth Gospel, once identified with the Apostle * John of Patmos, also known as John the Divine or John the Revelator, the author of the Book of Revelation, once identified with the Apostle * John the Presbyter, a figure either identified with or distinguished from the Apostle, the Evangelist and John of Patmos Other people with the given name Religious figures * John, father of Andrew the Apostle and Saint Peter * Pop ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  




Timothy Burstall
Timothy Burstall (1776–1860) was a British engineer and pioneer in the field of locomotive construction. Biography Only fragmentary information is available on Burstall's life and work. In 1824 he collaborated with John Hill under the name of Burstall and Hill of London to construct a two-axle road steam carriage for passenger freight and mail transport, following it in the following year by the Patent No. 5090 dated February 3, 1825. During test drives, however, it was found that the machine was not up to the vibrations caused by the bad roads and suffered too much damage. In 1826, Burstall and Hill filed another patent (No. 5405 from August 22) for a three-axle steam car, in which the boiler was to rest on its own base separately from the car body. In October of the same year, this second steam car reached speeds of up to 6 miles per hour during test drives on Ferry Road in Glasgow. In late July 1827, the car's boiler exploded while driving on a property on Westminster ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Leith
Leith (; gd, Lìte) is a port area in the north of the city of Edinburgh, Scotland, founded at the mouth of the Water of Leith. In 2021, it was ranked by '' Time Out'' as one of the top five neighbourhoods to live in the world. The earliest surviving historical references are in the royal charter authorising the construction of Holyrood Abbey in 1128 in which it is termed ''Inverlet'' (Inverleith). After centuries of control by Edinburgh, Leith was made a separate burgh in 1833 only to be merged into Edinburgh in 1920. Leith is located on the southern coast of the Firth of Forth and lies within the City of Edinburgh Council area; since 2007 it has formed one of 17 multi-member wards of the city. History As the major port serving Edinburgh, Leith has seen many significant events in Scottish history. First settlement The earliest evidence of settlement in Leith comes from several archaeological digs undertaken in The Shore area in the late 20th century. Amongst the fi ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Roller Bearings
In mechanical engineering, a rolling-element bearing, also known as a rolling bearing, is a bearing (mechanical), bearing which carries a load by placing rolling elements (such as balls or rollers) between two concentric, Groove (engineering), grooved rings called Race (bearing), races. The relative motion of the races causes the rolling elements to rolling, roll with very little rolling resistance and with little sliding (motion), sliding. One of the earliest and best-known rolling-element bearings are sets of logs laid on the ground with a large stone block on top. As the stone is pulled, the logs roll along the ground with little sliding friction. As each log comes out the back, it is moved to the front where the block then rolls on to it. It is possible to imitate such a bearing by placing several pens or pencils on a table and placing an item on top of them. See "bearing (mechanical), bearings" for more on the historical development of bearings. A rolling element rotary bea ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Axles
An axle or axletree is a central shaft for a rotation, rotating wheel and axle, wheel or gear. On wheeled vehicles, the axle may be fixed to the wheels, rotating with them, or fixed to the vehicle, with the wheels rotating around the axle. In the former case, bearing (mechanical), bearings or Bushing (bearing), bushings are provided at the mounting points where the axle is supported. In the latter case, a bearing or bushing sits inside a central hole in the wheel to allow the wheel or gear to rotate around the axle. Sometimes, especially on bicycles, the latter type axle is referred to as a ''spindle (tool), spindle''. Terminology On cars and trucks, several senses of the word ''axle'' occur in casual usage, referring to the shaft itself, its housing, or simply any transverse pair of wheels. Strictly speaking, a shaft which rotates with the wheel, being either Bolt (fastener), bolted or rotating spline, splined in fixed relation to it, is called an ''axle'' or ''axle shaft'' ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

History Of Steam Road Vehicles
The history of steam road vehicles comprises the development of vehicles powered by a steam engine for use on land and independent of rails, whether for conventional road use, such as the steam car and steam waggon, or for agricultural or heavy haulage work, such as the traction engine. The first experimental vehicles were built in the 18th and 19th century, but it was not until after Richard Trevithick had developed the use of high-pressure steam, around 1800, that mobile steam engines became a practical proposition. The first half of the 19th century saw great progress in steam vehicle design, and by the 1850s it was viable to produce them on a commercial basis. This progress was dampened by legislation which limited or prohibited the use of steam-powered vehicles on roads. Nevertheless, the 1880s to the 1920s saw continuing improvements in vehicle technology and manufacturing techniques, and steam road vehicles were developed for many applications. In the 20th century, the ra ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Rothwell, Hick And Rothwell
Rothwell, Hick and Rothwell was an engineering company in Bolton, England. Set up in 1822, the partners became interested in the production of steam locomotives after the Rainhill Trials. The company's first engine was ''Union'', a vertical boiler, with horizontal cylinders for the Bolton and Leigh Railway of which Hick and Rothwell were promoters and original shareholders, followed by three more locomotives the following year for American railways. Rothwell and Company In 1832, Benjamin Hick left to set up his own business, B. Hick and Sons, to be replaced by Benjamin Cubitt, (younger brother of William Cubitt) from Fenton, Murray and Jackson. The firm then became Rothwell and Company. A further order for America was fulfilled in 1833, then for a couple of years the firm was occupied with pumps and stationary engines. Locomotives, steam engines and cranes 1820s About 1827 the company supplied three steam engines to André Koechlin & Cie in France, one for the Mulhouse cot ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Rainhill Trials Locomotives
Rainhill is a village and civil parish within the Metropolitan Borough of St Helens, in Merseyside, England. The population of the civil parish taken at the 2011 census was 10,853. Historically part of Lancashire, Rainhill was formerly a township within the ecclesiastical parish of Prescot, and hundred of West Derby. Following the Local Government Act 1894, it became part of the Whiston Rural District. The Rainhill Trials of 1829 resulted in the selection of Stephenson's ''Rocket'' as the world's first modern steam locomotive. History Early history Rainhill has been recorded since Norman times but its name is believed to come from the Old English personal name of Regna or Regan. It is thought that around the time of the Domesday Book that Rainhill was a part of one of the townships within the "Widnes fee". Recordings have shown that in the year of 1246, Roger of Rainhill died and the township was divided into two-halves for each of his daughters. One half was centred on the ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]