|
Ozark Air Lines Flight 965
Ozark Air Lines Flight 965 was a scheduled commercial flight from Chicago, Illinois, to Lambert Field in St. Louis, Missouri, with a scheduled intermediate stopover at Greater Peoria Regional Airport in Peoria, Illinois. On March 27, 1968, the Douglas DC-9-15 jetliner operating the flight, carrying 44 passengers and five crew, collided in mid-air with a single-engined Cessna 150F while both aircraft were on approach to the same runway at Lambert Field. The DC-9 landed safely with no injuries to any of its 49 occupants, while both pilots in the two-person Cessna died in the collision and subsequent ground impact. Aircraft and crew The first accident aircraft was a Douglas DC-9-15, registered ''N970Z'', manufacturer's serial number ''45772'', manufactured on May 5, 1966 and owned and operated by Ozark Air Lines. At the time of the accident, it had a total time of 5,172 hours. There were three pilots aboard the flight: Captain R.J. Fitch, aged 52, had accumulated 24,127 flight ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Mid-air Collision
In aviation, a mid-air collision is an aviation accident, accident in which two or more aircraft come into unplanned contact during flight. Owing to the relatively high velocities involved and the likelihood of subsequent impact with the ground or sea, very severe damage or the total destruction of at least one of the aircraft usually results. The potential for a mid-air collision is increased by Aviation communication, miscommunication, mistrust, error in Air navigation, navigation, deviations from flight plans, lack of situational awareness, and the lack of Traffic collision avoidance system, collision-avoidance systems. Although a rare occurrence in general due to the vastness of open space available, collisions often happen near or at airports, where large volumes of aircraft are spaced more closely than in general flight. First recorded mid-air collision The first recorded collision between aircraft occurred at the "Milano Circuito Aereo Internazionale" meeting held betwee ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Flight Data Recorder
A flight recorder is an electronic recording device placed in an aircraft for the purpose of facilitating the investigation of aviation accidents and incidents. The device may often be referred to as a "black box", an outdated name which has become a misnomer—they are now required to be painted bright orange, to aid in their recovery after accidents. There are two types of flight recording devices: the flight data recorder (FDR) preserves the recent history of the flight through the recording of dozens of parameters collected several times per second; the cockpit voice recorder (CVR) preserves the recent history of the sounds in the cockpit, including the conversation of the pilots. The two devices may be combined into a single unit. Together, the FDR and CVR objectively document the aircraft's flight history, which may assist in any later investigation. The two flight recorders are required by international regulation, overseen by the International Civil Aviation Organizat ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Radar
Radar is a detection system that uses radio waves to determine the distance (''ranging''), angle, and radial velocity of objects relative to the site. It can be used to detect aircraft, ships, spacecraft, guided missiles, motor vehicles, weather formations, and terrain. A radar system consists of a transmitter producing electromagnetic waves in the radio or microwaves domain, a transmitting antenna, a receiving antenna (often the same antenna is used for transmitting and receiving) and a receiver and processor to determine properties of the objects. Radio waves (pulsed or continuous) from the transmitter reflect off the objects and return to the receiver, giving information about the objects' locations and speeds. Radar was developed secretly for military use by several countries in the period before and during World War II. A key development was the cavity magnetron in the United Kingdom, which allowed the creation of relatively small systems with sub-meter resolution. Th ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Flap (aeronautics)
A flap is a high-lift device used to reduce the stall (flight), stalling speed of an aircraft wing at a given weight. Flaps are usually mounted on the wing trailing edges of a fixed-wing aircraft. Flaps are used to reduce the take-off distance and the landing distance. Flaps also cause an increase in Drag (physics), drag so they are retracted when not needed. The flaps installed on most aircraft are partial-span flaps; spanwise from near the wing root to the inboard end of the ailerons. When partial-span flaps are extended they alter the spanwise lift distribution on the wing by causing the inboard half of the wing to supply an increased proportion of the lift, and the outboard half to supply a reduced proportion of the lift. Reducing the proportion of the lift supplied by the outboard half of the wing is accompanied by a reduction in the angle of attack on the outboard half. This is beneficial because it increases the margin above the Stall (fluid dynamics), stall of the outboa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
ICAO Phonetic Alphabet
The (International) Radiotelephony Spelling Alphabet, commonly known as the NATO phonetic alphabet, is the most widely used set of clear code words for communicating the letters of the Roman alphabet, technically a ''radiotelephonic spelling alphabet.'' It goes by various names, including NATO spelling alphabet, ICAO phonetic alphabet and ICAO spelling alphabet. The ITU phonetic alphabet and figure code is a rarely used variant that differs in the code words for digits. To create the code, a series of international agencies assigned 26 code words acrophonically to the letters of the Roman alphabet, with the intention of the letters and numbers being easily distinguishable from one another over radio and telephone, regardless of language barriers and connection quality. The specific code words varied, as some seemingly distinct words were found to be ineffective in real-life conditions. In 1956, NATO modified the then-current set of code words used by the International C ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Airfield Traffic Pattern
An airfield traffic pattern is a standard path followed by aircraft when taking off or landing while maintaining visual contact with the airfield. At an airport, the pattern (or circuit) is a standard path for coordinating air traffic. It differs from "straight-in approaches" and "direct climb-outs" in that aircraft using a traffic pattern remain close to the airport. Patterns are usually employed at small general aviation (GA) airfields and military airbases. Many large controlled airports avoid the system unless there is GA activity as well as commercial flights. However, some kind of a pattern may be used at airports in some cases such as when an aircraft is required to go around, but this kind of pattern at controlled airports may be very different in form, shape, and purpose to the standard traffic pattern as used at GA airports. The use of a pattern at airfields is for aviation safety. By using a consistent flight pattern, pilots will know from where to expect other air tr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Visual Flight Rules
In aviation, visual flight rules (VFR) are a set of regulations under which a pilot operates an aircraft in weather conditions generally clear enough to allow the pilot to see where the aircraft is going. Specifically, the weather must be better than basic VFR weather minima, i.e. in visual meteorological conditions (VMC), as specified in the rules of the relevant aviation authority. The pilot must be able to operate the aircraft with visual reference to the ground, and by visually avoiding obstructions and other aircraft. If the weather is less than VMC, pilots are required to use instrument flight rules, and operation of the aircraft will be primarily through referencing the instruments rather than visual reference. In a control zone, a VFR flight may obtain a clearance from air traffic control to operate as Special VFR. Requirements VFR require a pilot to be able to see outside the cockpit, to control the aircraft's altitude, navigate, and avoid obstacles and other aircraft ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Airfield Traffic Pattern
An airfield traffic pattern is a standard path followed by aircraft when taking off or landing while maintaining visual contact with the airfield. At an airport, the pattern (or circuit) is a standard path for coordinating air traffic. It differs from "straight-in approaches" and "direct climb-outs" in that aircraft using a traffic pattern remain close to the airport. Patterns are usually employed at small general aviation (GA) airfields and military airbases. Many large controlled airports avoid the system unless there is GA activity as well as commercial flights. However, some kind of a pattern may be used at airports in some cases such as when an aircraft is required to go around, but this kind of pattern at controlled airports may be very different in form, shape, and purpose to the standard traffic pattern as used at GA airports. The use of a pattern at airfields is for aviation safety. By using a consistent flight pattern, pilots will know from where to expect other air tr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Control Tower
Air traffic control (ATC) is a service provided by ground-based air traffic controllers who direct aircraft on the ground and through a given section of controlled airspace, and can provide advisory services to aircraft in non-controlled airspace. The primary purpose of ATC worldwide is to prevent collisions, organize and expedite the flow of air traffic, and provide information and other support for pilots. Air traffic controllers monitor the location of aircraft in their assigned airspace by radar and communicate with the pilots by radio. To prevent collisions, ATC enforces Separation (air traffic control), traffic separation rules, which ensure each aircraft maintains a minimum amount of empty space around it at all times. In many countries, ATC provides services to all private, military, and commercial aircraft operating within its airspace. Depending on the type of flight and the class of airspace, ATC may issue ''instructions'' that pilots are required to obey, or ''advis ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Contact Approach
A contact approach is an approach available to aircraft operating on an instrument flight rules (IFR) flight plan, where the pilot may deviate from the published instrument approach procedure (IAP) and proceed to the destination airport by visual reference to the surface. It is similar to a visual approach, except that the pilot is not required to have the destination airport nor the preceding aircraft in sight at all times during the approach, and the visibility requirements are less stringent. Overview Only pilots may initiate a request for this type of approach; regulations prohibit air traffic control (ATC) from asking pilots to perform them. A contact approach will only be issued if the aircraft is operating clear of clouds with at least 1 statute mile (1.6 km) of flight visibility, with a reasonable expectation of continuing to the destination airport under those conditions. Additionally, the reported ground visibility at the destination airport must be at least 1 statute mi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Outer Marker
A marker beacon is a particular type of VHF radio beacon used in aviation, usually in conjunction with an instrument landing system (ILS), to give pilots a means to determine position along an established route to a destination such as a runway. According to ''Article 1.107'' of the International Telecommunication Union's (ITU) ITU Radio Regulations (RR) a marker beacon is defined as "a transmitter in the aeronautical radionavigation service which radiates vertically a distinctive pattern for providing position information to aircraft". History From the 1930s until the 1950s, markers were used extensively along airways to provide an indication of an aircraft's specific position along the route, but from the 1960s they have become increasingly limited to ILS approach installations. They are now very gradually being phased out of service, especially in more developed parts of the world, as GPS and other technologies have made marker beacons increasingly redundant. Types There a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Instrument Approach
In aviation, an instrument approach or instrument approach procedure (IAP) is a series of predetermined maneuvers for the orderly transfer of an aircraft operating under instrument flight rules from the beginning of the initial approach to a landing, or to a point from which a landing may be made visually. These approaches are approved in the European Union by EASA and the respective country authorities and in the United States by the FAA or the United States Department of Defense for the military. The ICAO defines an instrument approach as, "a series of predetermined maneuvers by reference to flight instruments with specific protection from obstacles from the initial approach fix, or where applicable, from the beginning of a defined arrival route to a point from which a landing can be completed and thereafter, if landing is not completed, to a position at which holding or enroute obstacle clearance criteria apply." There are three categories of instrument approach procedures: pr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
