|
On-premises Wiring
On-premises wiring (customer premises wiring) is customer-owned telecommunication transmission or distribution lines. The transmission lines may be metallic (copper) or optical fiber, and may be installed within or between buildings. Premises wiring may consist of horizontal wiring, vertical wiring, and backbone cabling. It may extend from the point-of-entry to user work areas. Any type of telecommunications or data wiring is considered premises wiring, including telephone, computer/data, intercom, closed-circuit television. Premises networks are wired worldwide, across every industry, in both small and large-scale applications. Any type or number of topologies may be used – star, bus, ring, etc. In 1989, the United States Federal Communications Commission (FCC) deregulated charges for maintaining at home ''inside wiring''; the corresponding monthly charge was dropped January 1990. Ownership The ownership of on-premises wiring varies between jurisdictions: It depends on t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Inside Wiring
On-premises wiring (customer premises wiring) is customer-owned telecommunication transmission (telecommunications), transmission or distribution lines. The transmission lines may be metallic (copper) or optical fiber, and may be installed within or between buildings. Premises wiring may consist of horizontal wiring, vertical wiring, and backbone cabling. It may extend from the point-of-entry to User (telecommunications), user work areas. Any type of telecommunications or information technology, data wiring is considered premises wiring, including telephone, computer network, computer/data, intercom, closed-circuit television. Premises networks are wired worldwide, across every industry, in both small and large-scale applications. Any type or number of network topology, topologies may be used – star network, star, bus network, bus, ring network, ring, etc. In 1989, the United States Federal Communications Commission (FCC) deregulated charges for maintaining at home ''inside ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bus Network
A bus network is a network topology in which nodes are directly connected to a common half-duplex link called a bus. A host on a bus network is called a ''station''. In a bus network, every station will receive all network traffic, and the traffic generated by each station has equal transmission priority. A bus network forms a single network segment and collision domain. In order for nodes to share the bus, they use a medium access control technology such as carrier-sense multiple access (CSMA) or a bus master In computing, bus mastering is a feature supported by many bus architectures that enables a device connected to the bus to initiate direct memory access (DMA) transactions. It is also referred to as first-party DMA, in contrast with third-party .... References {{Network topologies Network architecture Network topology ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Signal Cables
A shielded cable or screened cable is an electrical cable that has a common conductive layer around its conductors for electromagnetic shielding. This shield is usually covered by an outermost layer of the cable. Common types of cable shielding can most broadly be categorized as foil type (hereunder: metallised film Metallised films (or metallized films) are polymer films coated with a thin layer of metal, usually aluminium. They offer the glossy metallic appearance of an aluminium foil at a reduced weight and cost. Metallised films are widely used for decorati ...), contraspiralling wire strands (braided or unbraided) or both. A longitudinal wire may be necessary with dielectric spiral foils to short out each turn. The shield acts as a Faraday cage – a surface that reflects electromagnetic radiation. This reduces both the Electromagnetic interference, interference from outside noise onto the signals and the signals from radiating out and potentially disturbing other devices ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Structured Cabling
In telecommunications, structured cabling is building or campus cabling infrastructure that consists of a number of standardized smaller elements (hence structured) called subsystems. Structured cabling components include twisted pair and optical cabling, patch panels and patch cables. Overview Structured cabling is the design and installation of a cabling system that will support multiple hardware uses and be suitable for today's needs and those of the future. With a correctly installed system, current and future requirements can be met, and hardware that is added in the future will be supported Structured cabling design and installation is governed by a set of standards that specify wiring data centers, offices, and apartment buildings for data or voice communications using various kinds of cable, most commonly category 5e (Cat 5e), category 6 (Cat 6), and fiber optic cabling and modular connectors. These standards define how to lay the cabling in various topologies in ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Riser Cable
__NOTOC__ Plenum cable is electrical cable that is laid in the plenum spaces of buildings. In the United States, plastics used in the construction of plenum cable are regulated under the National Fire Protection Association standard NFPA 90A: Standard for the Installation of Air Conditioning and Ventilating Systems. All materials intended for use on wire and cables to be placed in plenum spaces are designed to meet rigorous fire safety test standards in accordance with NFPA 262 and outlined in NFPA 90A. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer ( FEP). Polyolefin formulations, specifically based on polyethylene compounding had been developed by at least two companies in the early to mid-1990s; however, these were never commercialized, and development efforts continue in these yet-untapped product potentials. Development efforts on a non-halogen plenum compound were announced in 2 ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Demarc Extension In telephony, the demarcation point is the point at which the public switched telephone network ends and connects with the customer's on-premises wiring. It is the dividing line which determines who is responsible for installation and maintenance of wiring and equipment—customer/subscriber, or telephone company/provider. The demarcation point varies between countries and has changed over time. ''Demarcation point'' is sometimes abbreviated as demarc, DMARC, or similar. The term MPOE (minimum or main point of entry) is synonymous, with the added implication that it occurs as soon as possible upon entering the customer premises. A network interface device often serves as the demarcation point. History Prior to Federal Communications Commission (FCC) regulations separating the ownership of customer premises telecommunication equipment from the telephone network, there was no need for a public standard governing the interconnection of customer premises equipment (CPE) to the ... [...More Info...] [...Related Items...] |
