|
LMS Diesel Shunters
The London, Midland and Scottish Railway (LMS) pioneered the use of diesel shunting locomotives in Great Britain. The variety of experimental and production diesel shunters produced by the LMS is summarised below. 5519 renumbered ZM9 This was an 0-4-0 diesel mechananical shunting locomotive built by Hudswell Clarke for the Crewe Works Narrow-gauge railway in 1930. It was the first diesel locomotive supplied to a major UK railway. It had a McLaren-Benz 2-cylinder engine of 20 hp at 800 rpm. It was transferred to Horwich Works in 1935. It was renumbered ZM9 by British Railways and survived until 1957. 1831 This was the first experimental, standard-gauge shunter, nominally rebuilt from a Midland Railway steam locomotive in 1932 (originally built in September 1892 by the Vulcan Foundry). The rebuild therefore inherited the same number (1831), although little of the steam locomotive was actually re-used. 1831 was not successful, but it did provide useful data for the further deve ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
London, Midland And Scottish Railway
The London, Midland and Scottish Railway (LMSIt has been argued that the initials LMSR should be used to be consistent with LNER, GWR and SR. The London, Midland and Scottish Railway's corporate image used LMS, and this is what is generally used in historical circles. The LMS occasionally also used the initials LM&SR. For consistency, this article uses the initials LMS.) was a British railway company. It was formed on 1 January 1923 under the Railways Act of 1921, which required the grouping of over 120 separate railways into four. The companies merged into the LMS included the London and North Western Railway, Midland Railway, the Lancashire and Yorkshire Railway (which had previously merged with the London and North Western Railway on 1 January 1922), several Scottish railway companies (including the Caledonian Railway), and numerous other, smaller ventures. Besides being the world's largest transport organisation, the company was also the largest commercial enterprise ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
LMS Diesel Shunter 7052
LMS diesel shunter 7052 was an experimental 0-6-0 diesel-mechanical shunting locomotive, introduced by the London Midland and Scottish Railway (LMSR) in 1934 and which remained in service with that railway for six years. It was later acquired for military use until 1966. History No. 7052 locomotive was an experimental locomotive built by the Hunslet Engine Company at their Leeds works in 1934. It carried an original number of 7402 only within the works and was delivered as LMSR as number 7052. For six years it was used for shunting at Leeds before being loaned to the Air Ministry in 1940. It was loaned to the War Department between 1940 and 1942, which numbered it 24. It was withdrawn from LMS stock in December 1943 and sold for use at RNAD Broughton Moor, near Maryport, for which use it was flameproofed by Hunslet. After withdrawal in 1966, it was sold to a scrap metal company in Long Marston, which used it as a yard shunter A switcher, shunter, yard pilot, switch engine ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
0-6-0
Under the Whyte notation for the classification of steam locomotives, represents the wheel arrangement of no leading wheels, six powered and coupled driving wheels on three axles and no trailing wheels. This was the most common wheel arrangement used on both tender and tank locomotives in versions with both inside and outside cylinders. In the United Kingdom, the Whyte notation of wheel arrangement was also often used for the classification of electric and diesel-electric locomotives with side-rod coupled driving wheels. Under the UIC classification, popular in Europe, this wheel arrangement is written as C if the wheels are coupled with rods or gears, or Co if they are independently driven, the latter usually being electric and diesel-electric locomotives. Overview History The 0-6-0 configuration was the most widely used wheel arrangement for both tender and tank steam locomotives. The type was also widely used for diesel switchers (shunters). Because they lack leading a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
GWR Diesel Shunters
The Great Western Railway purchased two diesel shunters, and ordered a further seven immediately prior to Nationalisation, which were delivered to British Rail in 1948–49. The two shunters used by the GWR were numbered 1 and 2, while a series commencing at 501 was planned for the new locomotives ordered in the 1940s. British Rail numbered 2 and the new locomotives in a series commencing at 15100. 1 This locomotive was built by Fowler in 1933 and was used at Swindon Works. It was an 0-4-0 diesel mechanical shunter with a engine, diameter wheels and a wheelbase of . It was very similar to the London, Midland and Scottish Railway's departmental locomotive number 2, which was built a couple of years later. It was withdrawn in 1940 and sold to the Ministry of Supply. 2 / 15100 This locomotive was built by Hawthorn Leslie in 1936 and allocated to Swindon. It was a 0-6-0 diesel electric shunter, very similar to the London Midland and Scottish Railway 7069 class (later Br ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Great Western Railway
The Great Western Railway (GWR) was a British railway company that linked London with the southwest, west and West Midlands of England and most of Wales. It was founded in 1833, received its enabling Act of Parliament on 31 August 1835 and ran its first trains in 1838 with the initial route completed between London and Bristol in 1841. It was engineered by Isambard Kingdom Brunel, who chose a broad gauge of —later slightly widened to —but, from 1854, a series of amalgamations saw it also operate standard-gauge trains; the last broad-gauge services were operated in 1892. The GWR was the only company to keep its identity through the Railways Act 1921, which amalgamated it with the remaining independent railways within its territory, and it was finally merged at the end of 1947 when it was nationalised and became the Western Region of British Railways. The GWR was called by some "God's Wonderful Railway" and by others the "Great Way Round" but it was famed as the "Holiday ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
TOPS
Total Operations Processing System (TOPS) is a computer system for managing railway locomotives and rolling stock, known for many years of use in the United Kingdom. TOPS was originally developed between the Southern Pacific Railroad (SP), Stanford University and IBM as a replacement for paper-based systems for managing rail logistics. A jointly-owned consultancy company, ''TOPS On-Line Inc.'', was established in 1960 with the goal of implementing TOPS, as well as selling it to third parties. Development was protracted, requiring around 660 man-years of effort to produce a releasable build. During mid-1968, the first phase of the system was introduced on the SP, and quickly proved its advantages over the traditional methods practiced prior to its availability. In addition to SP, TOPS was widely adopted throughout North America and beyond. While it was at one point in widespread use across many of the United States railroads, the system has been perhaps most prominently used ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Rail Class 11
The British Rail Class 11 was applied to a batch of diesel shunting locomotives built from April 1945 to December 1952, based on a similar earlier batch built by the London, Midland and Scottish Railway (LMS) between 1934 and 1936. Overview Numbering An initial batch of twenty locomotives was built during World War II, fourteen of which were built for the War Department, with the first ten of these (70260-70269) subsequently going to the Nederlandse Spoorwegen post-war as NS 501–510. LMS numbers 7120–7126 went straight into LMS stock, and a follow-up batch was built, 7129 being the last diesel shunter to be built for the LMS. British Railways continued to build the class from 1948 to 1952, using numbers M7130–M7131 and 12045–12138. 7120–7129 and M7130–M7131 became BR numbers 12033–12044. The whole class of 12033–12138 became Class 11. Locomotives up to 12102 were built at LMS/BR Derby and 12103–12138 at BR Darlington. Export locomotives Close to 100 almo ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Rail Class D3/7
The British Railways Class D3/7 is a class of 0-6-0 diesel electric shunting locomotives built as LMS Nos. 7080–7119. The class were built from May 1939 through to July 1942 by the London, Midland and Scottish Railway at their Derby Works using a diesel electric transmission supplied by English Electric. They are a modified version of the 1934-vintage Class D3/6 (LMS 7069-7079) diesel shunters based on the English Electric 6K diesel engine of , but have jackshaft transmission necessitating a significant increase in body length. The D3/6 had two axle-hung traction motors instead, and this feature became commonplace in more modern designs built after World War II. Design The locomotives are built to the specifications of LMS CME W.A. Stanier for general and hump shunting at the company's Derby Works using engine and electric equipment supplied by the English Electric Company. The Engineer, 14 July 1939 p. 45 col. 1 Powertrain The engine and generator are supported on girders ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Rail Class D3/6
The British Rail Class D3/6 were diesel shunters designed in 1934/5 by English Electric for the London, Midland and Scottish Railway. (LMS) Prototype Between 1931 and 1934, the LMS ordered nine prototype 0-6-0 diesel shunters of different designs. The last of these was based on the English Electric 6K of diesel engine, with a long bonnet ("nose"), 0-6-0 wheel arrangement, EE 6K prime mover and two axle-hung traction motors. It was built by Hawthorne Leslie to English Electric design. Similar prototypes were later built for the Southern Railway ( SR1-3), Great Western Railway ( GWR2), and London and North Eastern Railway ( 8000-8004) and this configuration was repeated in most subsequent large diesel shunters built in Britain, such as the British Rail Class 11 and even more numerous British Rail Class 08 that entered service after World War II. After modification and uprating to , the prototype was taken into LMS stock in 1936 and numbered 7079, (later British Railways number ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Armstrong Whitworth
Sir W G Armstrong Whitworth & Co Ltd was a major British manufacturing company of the early years of the 20th century. With headquarters in Elswick, Newcastle upon Tyne, Armstrong Whitworth built armaments, ships, locomotives, automobiles and aircraft. The company was founded by William Armstrong in 1847, becoming Armstrong Mitchell and then Armstrong Whitworth through mergers. In 1927, it merged with Vickers Limited to form Vickers-Armstrongs, with its automobile and aircraft interests purchased by J D Siddeley. History In 1847, the engineer William George Armstrong founded the Elswick works at Newcastle, to produce hydraulic machinery, cranes and bridges, soon to be followed by artillery, notably the Armstrong breech-loading gun, with which the British Army was re-equipped after the Crimean War. In 1882, it merged with the shipbuilding firm of Charles Mitchell to form Armstrong Mitchell & Company and at the time its works extended for over a mile (about 2 km) along th ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
LMS Diesel Shunter 7058
LMS diesel shunter 7058 was based on an earlier Armstrong Whitworth prototype of 1932, which had been tested by the London, Midland and Scottish Railway. It was initially numbered 7408 and then re-numbered 7058. War Department use It was loaned to the War Department between 1941 and 1943 for use at the Longmoor Military Railway, but, despite the extensive period of time spent on loan, no WD number was allocated. Post-war use It passed to British Railways upon nationalisation in January 1948, which allocated it number 13000. However, it was withdrawn in November 1949 (and scrapped shortly afterwards) before the number had been applied. The number 13000 was then used instead for the first of the Class 08 shunters. See also * LMS diesel shunters The London, Midland and Scottish Railway (LMS) pioneered the use of diesel shunting locomotives in Great Britain. The variety of experimental and production diesel shunters produced by the LMS is summarised below. 5519 renumbere ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
LMS Diesel Shunter 7057
LMS diesel shunter 7057, later to become NCC Class 22, was built by Harland & Wolff. Testing started in July 1934 and the locomotive was taken into LMS stock in February 1935. It was loaned to the War Department between 1941-1943, which numbered it 233. It was withdrawn from LMS stock in January 1944 and sold back to Harland & Wolff, which rebuilt it with a new 225 hp (168 kW) engine and converted it to the gauge. It was then sold to the Northern Counties Committee, which numbered it 22. It was finally withdrawn in April 1965 and scrapped at the close of that year. See also * LMS diesel shunters * Diesel locomotives of Ireland Although prototype diesel locomotives ran in Britain before World War II, the railways of both the Republic and Northern Ireland changed over much more rapidly from steam to diesel traction than those in Britain, due to the island's limited coal r ... References * {{Ireland Diesel Locomotives 7057 Diesel shunter 7057 War Department ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> 0-6-0")
.jpg "Click for more on -> Armstrong Whitworth")