|
In-cab Signalling
Cab signaling is a railway safety system that communicates track status and condition information to the cab, crew compartment or driver's compartment of a locomotive, railcar or multiple unit. The information is continually updated giving an easy to read display to the train driver or engine driver. The simplest systems display the trackside signal, while more sophisticated systems also display allowable speed, location of nearby trains, and dynamic information about the track ahead. Cab signals can also be part of a more comprehensive train protection system that can automatically apply the brakes stopping the train if the operator does not respond appropriately to a dangerous condition. Overview The main purpose of a signal system is to enforce a safe separation between trains and to stop or slow trains in advance of a restrictive situation. The cab signal system is an improvement over the wayside signal system, where visual signals beside or above the right-of-way gov ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
CTA Cab-signal-display
CTA may refer to: Legislation *Children's Television Act, American legislation passed in 1990 that enforces a certain degree of educational television *Counter-Terrorism Act 2008 *Criminal Tribes Act, British legislation in India passed in 1871 which labelled entire communities as criminal Organizations Asia *Central Tibetan Administration * China Tourism Academy * Chinese Taoist Association * Crystal Thai Airlines Europe, Africa, and South America *Cairo Transportation Authority * Central de los Trabajadores Argentinos *Cyprus Turkish Airlines *Technical Centre for Agricultural and Rural Cooperation ACP-EU (CTA) *CTA International North America *California Teachers Association, a labor union * California Technology Agency, a California cabinet-level state agency * Call to Action, a Christian organization *Canadian Transportation Agency, an independent tribunal of the Government of Canada * Canadian Trucking Alliance, a Canadian federation of provincial trucking associations *Cent ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
ALSN
ALSN (Автоматическая локомотивная сигнализация непрерывная, in Latin - Avtomaticheskaya Lokomotivnaya Signalizatsiya Nepreryvnaya, meaning ''Continuous Automatic Train Signalling'') is a train control system used widely on the main lines of the ex-Soviet states (Russian Federation, Ukraine, Belarus, Latvia, Lithuania, Estonia). It uses modulated pulses inducted into rails similar to the Italian RS4 Codici and American Pulse Code Cab Signaling. On high-speed lines the variant ALS-EN (АЛС-ЕН) is used which takes advantage of a double phase difference modulation of the carrier wave. The name ALSN (АЛСН - автоматическая локомотивная сигнализация непрерывного действия) is composed of ALS, literally "Automatic Locomotive Signalling" (АЛС - автоматическая локомотивная сигнализация) and the variant designation N "Continuous Effect" ( ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Track Circuit
A track circuit is an electrical device used to prove the absence of a train on rail tracks to signallers and control relevant signals. An alternative to track circuits are axle counters. Principles and operation The basic principle behind the track circuit lies in the connection of the two rails by the wheels and axle of locomotives and rolling stock to short an electrical circuit. This circuit is monitored by electrical equipment to detect the absence of the trains. Since this is a safety appliance, fail-safe operation is crucial. Hence the circuit is designed to indicate the presence of a train when failures occur. On the other hand, false occupancy readings are disruptive to railway operations and must be minimized. Track circuits allow railway signalling systems to operate semi-automatically, by displaying signals for trains to slow or stop in the presence of occupied track ahead of them. They help prevent Train dispatcher, dispatchers and Manual block, operators from ca ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Chicago And North Western Railroad
The Chicago and North Western was a Class I railroad in the Midwestern United States. It was also known as the "North Western". The railroad operated more than of track at the turn of the 20th century, and over of track in seven states before retrenchment in the late 1970s. Until 1972, when the employees purchased the company, it was named the Chicago and North Western Railway (or Chicago and North Western Railway Company). The C&NW became one of the longest railroads in the United States as a result of mergers with other railroads, such as the Chicago Great Western Railway, Minneapolis and St. Louis Railway and others. By 1995, track sales and abandonment had reduced the total mileage to about 5,000. The majority of the abandoned and sold lines were lightly trafficked branches in Iowa, Illinois, Minnesota, South Dakota and Wisconsin. Large line sales, such as those that resulted in the Dakota, Minnesota and Eastern Railroad, further helped reduce the railroad to a mainline ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
General Railway Signal
General Railway Signal Company (GRS) was an American manufacturing company located in the Rochester, New York area. GRS was focused on railway signaling equipment, systems and services. The company was established in 1904 and became part of Alstom#Transport, Alstom Transport in 1998. GRS was a member of the Dow Jones Industrial Average from 1928 to 1930. History GRS was founded in 1904 with the merger of three companies (Pneumatic Signal Company of Rochester, New York; Taylor Signal Co. of Buffalo, New York and Standard Railroad Signal Company of Arlington, New Jersey). In 1923 GRS acquired the Federal Signal Company of Albany, New York. General Railway Signal was one of the 30 stocks when the Dow Jones Industrial Average was expanded from a 20-stock average on October 1, 1928. It was replaced in the DJIA by Liggett & Myers on July 18, 1930. In 1965, General Signal Corporation (GSX) was created with the intent to diversify into areas other than railway signaling. GRS was a wholly ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Induction Loop
An induction or inductive loop is an electromagnetic communication or detection system which uses a moving magnet or an alternating current to induce an electric current in a nearby wire. Induction loops are used for transmission and reception of communication signals, or for detection of metal objects in metal detectors or vehicle presence indicators. A common modern use for induction loops is to provide hearing assistance to hearing-aid users. Applications Vehicle detection Vehicle detection loops, called ''inductive-loop traffic detectors'', can detect vehicles passing or arriving at a certain point, for instance approaching a traffic light or in motorway traffic. An insulated, electrically conducting loop is installed in the pavement. The electronics unit applies alternating current electrical energy onto the wire loops at frequencies between 10 k Hz to 200 kHz, depending on the model. The inductive-loop system behaves as a tuned electrical circuit in which the lo ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Inductive Sensor
An inductive sensor is a device that uses the principle of electromagnetic induction to detect or measure objects. An inductor develops a magnetic field when a current flows through it; alternatively, a current will flow through a circuit containing an inductor when the magnetic field through it changes. This effect can be used to detect metallic objects that interact with a magnetic field. Non-metallic substances such as liquids or some kinds of dirt do not interact with the magnetic field, so an inductive sensor can operate in wet or dirty conditions.Winncy Y. Du, ''Resistive, Capacitive, Inductive, and Magnetic Sensor Technologies'', CRC Press, 2014 , Chapter 4 ''Inductive Sensors'' Principle The inductive sensor is based on Faraday's law of induction. The temporal variations of the Magnetic Flux \Phi through a ''N'' turns circuit will induce a voltage ''e'' which follows: : e = - N\frac which can be expressed in a simpler way: : e = - N\times S\frac by assuming that the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Automatic Train Control
Automatic train control (ATC) is a general class of train protection systems for railways that involves a speed control mechanism in response to external inputs. For example, a system could effect an emergency brake application if the driver does not react to a signal at danger. ATC systems tend to integrate various cab signalling technologies and they use more granular deceleration patterns in lieu of the rigid stops encountered with the older automatic train stop (ATS) technology. ATC can also be used with automatic train operation (ATO) and is usually considered to be the safety-critical part of a railway system. Over time, there have been many different safety systems labelled as "automatic train control". The first experimental apparatus was installed on the Henley branch line in January 1906 by the Great Western Railway, although it would now be referred to as an automatic warning system (AWS) because the driver retained full command of braking. The term is especially co ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Fail Safe
In engineering, a fail-safe is a design feature or practice that in the event of a specific type of failure, inherently responds in a way that will cause minimal or no harm to other equipment, to the environment or to people. Unlike inherent safety to a particular hazard, a system being "fail-safe" does not mean that failure is impossible or improbable, but rather that the system's design prevents or mitigates unsafe consequences of the system's failure. That is, if and when a "fail-safe" system fails, it remains at least as safe as it was before the failure. Since many types of failure are possible, failure mode and effects analysis is used to examine failure situations and recommend safety design and procedures. Some systems can never be made fail-safe, as continuous availability is needed. Redundancy, fault tolerance, or contingency plans are used for these situations (e.g. multiple independently controlled and fuel-fed engines). Examples Mechanical or physical Examples incl ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Automatische Treinbeïnvloeding
Automatische TreinBeïnvloeding or ATB (English: Automatic Train Control) is a Dutch train protection system first developed in the 1950s. Its installation was spurred by the Harmelen train disaster of 1962. ATB operates by the train collecting electrical signals from line-side apparatus and will override the driver's controls in the following situations: * a) failure to reduce speed at a caution signal (ATB will slow the train sufficiently to stop at the next signal). * b) failure to observe speed limit (ATB makes an immediate emergency brake application) ATB-EG ATB-EG ''(''ATB Eerste Generatie ''English: ATB First Generation'') is based on the American Pulse Code Cab Signaling system. It is installed on all major Dutch rail lines Technical overview ATB-EG controls 5 speeds: 40 km/h, 60 km/h, 80 km/h, 130 km/h and 140 km/h. Just like Pulse Code Cab Signaling the system works by sending pulses along the AC track circuit. When the circuit is closed by ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> Chicago And North Western Railroad")
.svg "Click for more on -> Inductive Sensor")
