|
ISO-IR-68
The APL Character Set for Workspace Interchange, registered for use with ISO/IEC 2022 as ISO-IR-68, is a character set developed by the APL Working Group of the Canadian Standards Association. IBM calls it Code page 371. It is one of several APL code pages used for the syntax and symbols used by the APL programming language APL (named after the book ''A Programming Language'') is a programming language developed in the 1960s by Kenneth E. Iverson. Its central datatype is the multidimensional array. It uses a large range of special graphic symbols to represent mos .... Character set Composite characters The encoding intends that certain of the above characters should be able to be represented at the same character position to produce additional symbols required for APL as composite characters, such as the following: References {{APL programming language Character sets APL programming language family ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Digital Encoding Of APL Symbols
The programming language APL uses a number of symbols, rather than words from natural language, to identify operations, similarly to mathematical symbols. Prior to the wide adoption of Unicode, a number of special-purpose EBCDIC and non-EBCDIC code pages were used to represent the symbols required for writing APL. Character sets Due to its origins on IBM Selectric-based teleprinters, APL symbols have traditionally been represented on the wire using a unique, non-standard character set. In the 1960s and 1970s, few terminal devices existed which could reproduce them, the most popular ones being the IBM 2741 and IBM 1050 fitted with a specific APL print head. Over time, with the universal use of high-quality graphic display, printing devices and Unicode support, the APL character font problem has largely been eliminated. Character repertoire IBM assigns the following character IDs (GCGIDs) to APL syntax, which are used in the definitions of its code pages. EBCDIC code pages Code ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Vertical Tabulation
The tab key (abbreviation of tabulator key or tabular key) on a keyboard is used to advance the cursor to the next tab stop. History The word ''tab'' derives from the word ''tabulate'', which means "to arrange data in a tabular, or table, form." When a person wanted to type a table (of numbers or text) on a typewriter, there was a lot of time-consuming and repetitive use of the space bar and backspace key. To simplify this, a horizontal bar was placed in the mechanism called the tabulator rack. Pressing the tab key would advance the carriage to the next tabulator stop. The original tabulator stops were adjustable clips that could be arranged by the user on the tabulator rack. Fredric Hillard filed a patent application for such a mechanism in 1900. The tab mechanism came into its own as a rapid and consistent way of uniformly indenting the first line of each paragraph. Often a first tab stop at 5 or 6 characters was used for this, far larger than the indentation used when t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cancel Character
In telecommunication, the term cancel character has the following meanings: #A control character ("CAN", "Cancel", U+0018, or ^X) used to indicate that the data with which it is associated are in error or are to be disregarded. Exact meaning can depend on protocol. For example: #* In some journalistic text transmission formats, it signifies that the preceding word should be deleted; it is sometimes called "Kill Word" ("KW") in this context. #* In some Videotex formats, it stops any running macros. In others, it clears the current line after the cursor position (compare ). #A control character In computing and telecommunication, a control Character (computing), character or non-printing character (NPC) is a code point (a number) in a character encoding, character set, that does not represent a written symbol. They are used as in-band ... ("CCH", "Cancel Character", U+0094, or ESC T) used to erase the previous character. This character was created as an unambiguous alternativ ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
End Of Transmission Block
End-of-Transmission-Block (ETB) is a communications control character used to indicate the end of a block of data for communications purposes. ETB is used for segmenting data into blocks when the block structure is not necessarily related to the processing function. In ASCII, ETB is code point 23 (0x17, or in caret notation) in the C0 control code set. In EBCDIC Extended Binary Coded Decimal Interchange Code (EBCDIC; ) is an eight- bit character encoding used mainly on IBM mainframe and IBM midrange computer operating systems. It descended from the code used with punched cards and the corresponding ..., ETB is code point 0x26. References *Nichols A., Nichols et al.: ''Data Communications for Microcomputers'' (1982) ASCII Control characters {{Compu-stub ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Negative Acknowledge Character
In data networking, telecommunications, and computer buses, an acknowledgment (ACK) is a signal that is passed between communicating processes, computers, or devices to signify acknowledgment, or receipt of message, as part of a communications protocol. The negative-acknowledgement (NAK or NACK) is a signal that is sent to reject a previously received message or to indicate some kind of error. Acknowledgments and negative acknowledgments inform a sender of the receiver's state so that it can adjust its own state accordingly. Many protocols contain checksums to verify the integrity of the payload and header. Checksums are used to detect data corruption. If a message is received with an invalid checksum (that is, the data received would have a different checksum than the message had), the receiver can know that some information was corrupted. Most often, when checksums are employed, a corrupted message received will either not be served an ACK signal, or will be served a NAK sign ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Device Control 4
The C0 and C1 control code or control character sets define control codes for use in text by computer systems that use ASCII and derivatives of ASCII. The codes represent additional information about the text, such as the position of a cursor, an instruction to start a new line, or a message that the text has been received. C0 codes are the range 00 HEX–1FHEX and the default C0 set was originally defined in ISO 646 (ASCII). C1 codes are the range 80HEX–9FHEX and the default C1 set was originally defined in ECMA-48 (harmonized later with ISO 6429). The ISO/IEC 2022 system of specifying control and graphic characters allows other C0 and C1 sets to be available for specialized applications, but they are rarely used. C0 controls ASCII defined 32 control characters, plus a necessary extra character for the DEL character, 7FHEX or 01111111BIN (needed to punch out all the holes on a paper tape and erase it). This large number of codes was desirable at the time, as mult ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Device Control 3
The C0 and C1 control code or control character sets define control codes for use in text by computer systems that use ASCII and derivatives of ASCII. The codes represent additional information about the text, such as the position of a cursor, an instruction to start a new line, or a message that the text has been received. C0 codes are the range 00 HEX–1FHEX and the default C0 set was originally defined in ISO 646 (ASCII). C1 codes are the range 80HEX–9FHEX and the default C1 set was originally defined in ECMA-48 (harmonized later with ISO 6429). The ISO/IEC 2022 system of specifying control and graphic characters allows other C0 and C1 sets to be available for specialized applications, but they are rarely used. C0 controls ASCII defined 32 control characters, plus a necessary extra character for the DEL character, 7FHEX or 01111111BIN (needed to punch out all the holes on a paper tape and erase it). This large number of codes was desirable at the time, as multi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Device Control 2
The C0 and C1 control code or control character sets define control codes for use in text by computer systems that use ASCII and derivatives of ASCII. The codes represent additional information about the text, such as the position of a cursor, an instruction to start a new line, or a message that the text has been received. C0 codes are the range 00 HEX–1FHEX and the default C0 set was originally defined in ISO 646 (ASCII). C1 codes are the range 80HEX–9FHEX and the default C1 set was originally defined in ECMA-48 (harmonized later with ISO 6429). The ISO/IEC 2022 system of specifying control and graphic characters allows other C0 and C1 sets to be available for specialized applications, but they are rarely used. C0 controls ASCII defined 32 control characters, plus a necessary extra character for the DEL character, 7FHEX or 01111111BIN (needed to punch out all the holes on a paper tape and erase it). This large number of codes was desirable at the time, as multi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Device Control 1
The C0 and C1 control code or control character sets define control codes for use in text by computer systems that use ASCII and derivatives of ASCII. The codes represent additional information about the text, such as the position of a cursor, an instruction to start a new line, or a message that the text has been received. C0 codes are the range 00 HEX–1FHEX and the default C0 set was originally defined in ISO 646 (ASCII). C1 codes are the range 80HEX–9FHEX and the default C1 set was originally defined in ECMA-48 (harmonized later with ISO 6429). The ISO/IEC 2022 system of specifying control and graphic characters allows other C0 and C1 sets to be available for specialized applications, but they are rarely used. C0 controls ASCII defined 32 control characters, plus a necessary extra character for the DEL character, 7FHEX or 01111111BIN (needed to punch out all the holes on a paper tape and erase it). This large number of codes was desirable at the time, as multi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Data Link Escape
The C0 and C1 control code or control character sets define control codes for use in text by computer systems that use ASCII and derivatives of ASCII. The codes represent additional information about the text, such as the position of a cursor, an instruction to start a new line, or a message that the text has been received. C0 codes are the range 00 HEX–1FHEX and the default C0 set was originally defined in ISO 646 (ASCII). C1 codes are the range 80HEX–9FHEX and the default C1 set was originally defined in ECMA-48 (harmonized later with ISO 6429). The ISO/IEC 2022 system of specifying control and graphic characters allows other C0 and C1 sets to be available for specialized applications, but they are rarely used. C0 controls ASCII defined 32 control characters, plus a necessary extra character for the DEL character, 7FHEX or 01111111BIN (needed to punch out all the holes on a paper tape and erase it). This large number of codes was desirable at the time, as multi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
