INT 10H
INT 10h, INT 10H or INT 16 is shorthand for BIOS interrupt call 10 hex, the 17th interrupt vector in an x86-based computer system. The BIOS typically sets up a real mode interrupt handler at this vector that provides video services. Such services include setting the video mode, character and string output, and graphics primitives (reading and writing pixels in graphics mode). To use this call, load AH with the number of the desired subfunction, load other required parameters in other registers, and make the call. INT 10h is fairly slow, so many programs bypass this BIOS routine and access the display hardware directly. Setting the video mode, which is done infrequently, can be accomplished by using the BIOS, while drawing graphics on the screen in a game needs to be done quickly, so direct access to video RAM is more appropriate than making a BIOS call for every pixel. Furthermore, on a modern x86 system, BIOS calls can only be performed in Real mode, or Virtual 8086 mode. v808 ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
BIOS Interrupt Call
BIOS interrupt calls are a facility that operating systems and application programs use to invoke the facilities of the Basic Input/Output System firmware on IBM PC compatible computers. Traditionally, BIOS calls are mainly used by DOS programs and some other software such as boot loaders (including, mostly historically, relatively simple application software that boots directly and runs without an operating system—especially game software). BIOS runs in the real address mode (Real Mode) of the x86 CPU, so programs that call BIOS either must also run in real mode or must switch from protected mode to real mode before calling BIOS and then switching back again. For this reason, modern operating systems that use the CPU in Protected mode or Long mode generally do not use the BIOS interrupt calls to support system functions, although they use the BIOS interrupt calls to probe and initialize hardware during booting. Real mode has the 1MB memory limitation, modern boot loaders ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Extensible Firmware Interface
UEFI (Unified Extensible Firmware Interface) is a set of specifications written by the UEFI Forum. They define the architecture of the platform firmware used for booting and its interface for interaction with the operating system. Examples of firmware that implement these specifications are AMI Aptio, Phoenix SecureCore, TianoCore EDK II and InsydeH2O. UEFI replaces the BIOS which was present in the boot ROM of all personal computers that are IBM PC-compatible, although it can provide backwards compatibility with the BIOS using CSM booting. Intel developed the original ''Extensible Firmware Interface'' (''EFI'') specifications. Some of the EFI's practices and data formats mirror those of Microsoft Windows. In 2005, UEFI deprecated EFI 1.10 (the final release of EFI). UEFI is independent of platform and programming language, but C is used for the reference implementation TianoCore EDKII. History The original motivation for EFI came during early development of the first Int ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Mode 13h
Mode 13h is the standard 256-color mode on VGA graphics hardware introduced in 1987 with the IBM PS/2. It has a resolution of 320×200 pixels. It was used extensively in computer games and art/animation software of the late 1980s and early to mid-1990s. "13h" refers to the number of the mode in the VGA BIOS. The "h" stands for hexadecimal. Mode 13h provides programmers with a linear 320x200 block of video memory, where each byte represents one pixel. This allows ease of programming at the expense of access to other useful features of the VGA hardware. Given the aspect ratio of a 320×200 resolution screen for use on a 4:3 display, Mode 13h does not have square pixels. Technical details Mode 13h is something of a curiosity, because the VGA is a planar device from a hardware perspective, and not suited to chunky graphics operation. The VGA has 256 KiB of video memory consisting of 4 banks of 64 KiB, known as planes (or 'maps' in IBM's documentation). Planar ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Sign Bit
In computer science, the sign bit is a bit in a signed number representation that indicates the sign of a number. Although only signed numeric data types have a sign bit, it is invariably located in the most significant bit position, so the term may be used interchangeably with "most significant bit" in some contexts. Almost always, if the sign bit is 0, the number is non-negative (positive or zero). If the sign bit is 1 then the number is negative, although formats other than two's complement integers allow a signed zero: distinct "positive zero" and "negative zero" representations, the latter of which does not correspond to the mathematical concept of a negative number. In the two's complement representation, the sign bit has the weight where is the number of bits. In the ones' complement representation, the most negative value is , but there are two representations of zero, one for each value of the sign bit. In a sign-and-magnitude representation of numbers, the value ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
PC AT
The IBM Personal Computer/AT (model 5170, abbreviated as IBM AT or PC/AT) was released in 1984 as the fourth model in the IBM Personal Computer line, following the IBM PC/XT and its IBM Portable PC variant. It was designed around the Intel 80286 microprocessor. Name IBM did not specify an expanded form of "AT" on the machine, press releases, brochures or documentation, but some sources expand the term as "Advanced Technology", including at least one internal IBM document. History IBM's 1984 introduction of the AT was seen as an unusual move for the company, which typically waited for competitors to release new products before producing its own models. At $4,000–6,000, it was only slightly more expensive than considerably slower IBM models. The announcement surprised rival executives, who admitted that matching IBM's prices would be difficult. No major competitor showed a comparable computer at COMDEX Las Vegas that year. Features The AT is IBM PC compatible, with the ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Color Graphics Adapter
The Color Graphics Adapter (CGA), originally also called the ''Color/Graphics Adapter'' or ''IBM Color/Graphics Monitor Adapter'', introduced in 1981, was IBM's first color graphics card for the IBM PC and established a De facto standard, de facto computer display standard. Hardware design The original IBM CGA graphics card was built around the Motorola 6845 display controller, came with 16 kilobytes of video memory built in, and featured several graphics and text modes. The highest display resolution of any mode was 640×200, and the highest color depth supported was 4-bit (16 colors). The CGA card could be connected either to a direct-drive Cathode ray tube, CRT monitor using a 4-bit computing, 4-bit digital (Transistor-transistor logic, TTL) RGB(I), RGBI interface, such as the IBM 5153 color display, or to an NTSC-compatible television or composite video computer monitor, monitor via an RCA connector. The RCA connector provided only baseband video, so to connect the ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
BIOS Color Attributes
A BIOS Color Attribute is an 8 bit value where the low 4 bits represent the character color and the high 4 bits represent the background color. The name comes from the fact that these colors are used in BIOS interrupts, specifically INT 10h, the video interrupt. When writing text to the screen, a BIOS color attribute is used to designate the color to write the text in. For example, to print a white character with a black background, a color attribute of 0F hex would be used. The high four bits are set to 0000 bin, representing the background color, black. The low 4 bits, 1111bin, represent the foreground color, white. The highest bit of the color attribute, which is also the highest bit of the background color can take over two functions. It can either have no influence on the background color making text blink when set, effectively limiting the available background colors to only eight, or if intensive background colors are enabled the full 16 colors become available but blinking ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
BIOS Color Attributes
A BIOS Color Attribute is an 8 bit value where the low 4 bits represent the character color and the high 4 bits represent the background color. The name comes from the fact that these colors are used in BIOS interrupts, specifically INT 10h, the video interrupt. When writing text to the screen, a BIOS color attribute is used to designate the color to write the text in. For example, to print a white character with a black background, a color attribute of 0F hex would be used. The high four bits are set to 0000 bin, representing the background color, black. The low 4 bits, 1111bin, represent the foreground color, white. The highest bit of the color attribute, which is also the highest bit of the background color can take over two functions. It can either have no influence on the background color making text blink when set, effectively limiting the available background colors to only eight, or if intensive background colors are enabled the full 16 colors become available but blinking ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Light Pen
A light pen is a computer input device in the form of a light-sensitive wand used in conjunction with a computer's cathode-ray tube (CRT) display. It allows the user to point to displayed objects or draw on the screen in a similar way to a touchscreen but with greater positional accuracy. A light pen can work with any CRT-based display, but its ability to be used with LCDs was unclear (though Toshiba and Hitachi displayed a similar idea at the "Display 2006" show in Japan). A light pen detects changes in brightness of nearby screen pixels when scanned by cathode-ray tube electron beam and communicates the timing of this event to the computer. Since a CRT scans the entire screen one pixel at a time, the computer can keep track of the expected time of scanning various locations on screen by the beam and infer the pen's position from the latest time stamps. History The first light pen, at this time still called "light gun", was created around 1945–1955 as part of the Whirl ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
UEFI GOP
UEFI (Unified Extensible Firmware Interface) is a set of specifications written by the UEFI Forum. They define the architecture of the platform firmware used for booting and its interface for interaction with the operating system. Examples of firmware that implement these specifications are AMI Aptio, Phoenix SecureCore, TianoCore EDK II and InsydeH2O. UEFI replaces the BIOS which was present in the boot ROM of all personal computers that are IBM PC-compatible, although it can provide backwards compatibility with the BIOS using CSM booting. Intel developed the original ''Extensible Firmware Interface'' (''EFI'') specifications. Some of the EFI's practices and data formats mirror those of Microsoft Windows. In 2005, UEFI deprecated EFI 1.10 (the final release of EFI). UEFI is independent of platform and programming language, but C is used for the reference implementation TianoCore EDKII. History The original motivation for EFI came during early development of the fir ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
UEFI
UEFI (Unified Extensible Firmware Interface) is a set of specifications written by the UEFI Forum. They define the architecture of the platform firmware used for booting and its interface for interaction with the operating system. Examples of firmware that implement these specifications are AMI Aptio, Phoenix SecureCore, TianoCore EDK II and InsydeH2O. UEFI replaces the BIOS which was present in the boot ROM of all personal computers that are IBM PC-compatible, although it can provide backwards compatibility with the BIOS using CSM booting. Intel developed the original ''Extensible Firmware Interface'' (''EFI'') specifications. Some of the EFI's practices and data formats mirror those of Microsoft Windows. In 2005, UEFI deprecated EFI 1.10 (the final release of EFI). UEFI is independent of platform and programming language, but C is used for the reference implementation TianoCore EDKII. History The original motivation for EFI came during early development of the f ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
VESA BIOS Extensions
VESA BIOS Extensions (VBE) is a VESA standard, currently at version 3, that defines the interface that can be used by software to access compliant video boards at high resolutions and bit depths. This is opposed to the "traditional" int 10h BIOS calls, which are limited to resolutions of 640×480 pixels with 16 color (4-bit) depth or less. VBE is made available through the video card's BIOS, which installs during boot up some interrupt vectors that point to itself. Most newer cards implement the more capable VBE 3.0 standard. Older versions of VBE provide only a real mode interface, which cannot be used without a significant performance penalty from within protected mode operating systems. Consequently, the VBE standard has almost never been used for writing a video card's drivers; each vendor has thus had to invent a proprietary protocol for communicating with its own video card. Despite this, it is common that a driver thunk out to the real mode interrupt in order to initia ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |