|
Doepfer A-100
The Doepfer A-100 is an analog modular synthesizer system introduced by German audio manufacturer Doepfer in 1995. Although only 10 module types were at time of release, it currently has more than 120 modules plus several different enclosures and accessories. Design A-100 modules are designed to be rackmounted, each being 3U tall and a multiple of 2HP wide, and a variety of cases are available to house them. This type of racking system, Eurorack, has been adopted by many other manufacturers of synthesiser modules. Modules are patched using standard mono miniature (3.5 mm) leads. This combination of 3U height, multiples of 2HP width, and 3.5 mm leads is known more generally as the Eurorack standard, and is in contrast to the older combination of 5U height and 6.35 mm width pioneered by Moog. Other companies such as Analogue Solutions, Analogue Systems, Roland, Moog and Cwejman have also adopted the Eurorack standard, making it relatively easy to integrate t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Subtractive Synthesis
Subtractive synthesis is a method of sound synthesis in which partials of an audio signal (often one rich in harmonics) are attenuated by a filter to alter the timbre of the sound. While subtractive synthesis can be applied to any source audio signal, the sound most commonly associated with the technique is that of analog synthesizers of the 1960s and 1970s, in which the harmonics of simple waveforms such as sawtooth, pulse or square waves are attenuated with a voltage-controlled resonant low-pass filter. Many digital, virtual analog and software synthesizers use subtractive synthesis, sometimes in conjunction with other methods of sound synthesis. Examples of subtractive synthesis A human example The basis of subtractive synthesis can be understood by considering the human voice; when a human speaks, sings or makes other vocal noises, the vocal folds act as an oscillator and the mouth and throat as a filter. Consider the difference between singing "oooh" and "aaah" , ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Theremin
The theremin (; originally known as the ætherphone/etherphone, thereminophone or termenvox/thereminvox) is an electronic musical instrument controlled without physical contact by the performer (who is known as a thereminist). It is named after its inventor, Leon Theremin, who patented the device in 1928. The instrument's controlling section usually consists of two metal antennas which sense the relative position of the thereminist's hands and control oscillators for frequency with one hand, and amplitude (volume) with the other. The electric signals from the theremin are amplified and sent to a loudspeaker. The sound of the instrument is often associated with eerie situations. The theremin has been used in movie soundtracks such as Miklós Rózsa's '' Spellbound'' and '' The Lost Weekend'', Bernard Herrmann's ''The Day the Earth Stood Still'', and Justin Hurwitz's '' First Man'' as well as in theme songs for television shows such as the ITV drama ''Midsomer Murders'' a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Noise Generator
A noise generator is a circuit that produces electrical noise (i.e., a random signal). Noise generators are used to test signals for measuring noise figure, frequency response, and other parameters. Noise generators are also used for generating random numbers. Theory There are several circuits used for noise generation. For example, temperature-controlled resistors, temperature-limited vacuum diodes, zener diodes, and gas discharge tubes. A source that can be switched on and off ("gated") is beneficial for some test methods. Noise generators usually rely on a fundamental noise process such as thermal noise or shot noise. Thermal noise generator Thermal noise can be a fundamental standard. A resistor at a certain temperature has a thermal noise associated with it. A noise generator might have two resistors at different temperatures and switch between the two resistors. The resulting output power is low. (For a 1 kΩ resistor at room temperature and a 10 kHz bandwid ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Roland TR-808
The Roland TR-808 Rhythm Composer, commonly known as the 808, is a drum machine manufactured by the Roland Corporation between 1980 and 1983. It was one of the first drum machines to allow users to program rhythms instead of using preset patterns. Unlike its nearest competitor at the time, the more expensive Linn LM-1, the 808 generates sounds using analog synthesis rather than by playing samples (prerecorded sounds). Launched when electronic music had yet to become mainstream, the 808 received mixed reviews for its unrealistic drum sounds and was a commercial failure. After building approximately 12,000 units, Roland discontinued the 808 after its semiconductors became impossible to restock. It was succeeded by the TR-909 in 1983. Over the course of the 1980s, the 808 attracted a cult following among underground musicians for its affordability on the used market, ease of use and idiosyncratic sounds, particularly its deep, booming bass drum. It became a cornerstone of the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Waveform
In electronics, acoustics, and related fields, the waveform of a signal is the shape of its graph as a function of time, independent of its time and magnitude scales and of any displacement in time.David Crecraft, David Gorham, ''Electronics'', 2nd ed., , CRC Press, 2002, p. 62 In electronics, the term is usually applied to periodically varying voltages, currents, or electromagnetic fields. In acoustics, it is usually applied to steady periodic sounds—variations of pressure in air or other media. In these cases, the waveform is an attribute that is independent of the frequency, amplitude, or phase shift of the signal. The term can also be used for non-periodic signals, like chirps and pulses. The waveform of an electrical signal can be visualized in an oscilloscope or any other device that can capture and plot its value at various times, with a suitable scales in the time and value axes. The electrocardiograph is a medical device to record the waveform of t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Ring Modulation
In electronics, ring modulation is a signal processing function, an implementation of frequency mixing, in which two signals are combined to yield an output signal. One signal, called the carrier, is typically a sine wave or another simple waveform; the other signal is typically more complicated and is called the input or the modulator signal. A ring modulator is an electronic device for ring modulation. A ring modulator may be used in music synthesizers and as an effects unit. The name derives from the fact that the analog circuit of diodes originally used to implement this technique takes the shape of a ring: a diode ring. The circuit is similar to a bridge rectifier, except that instead of the diodes facing left or right, they face clockwise or counterclockwise. Ring modulation is quite similar to amplitude modulation, with the difference that in the latter the modulator is shifted to be positive before being multiplied with the carrier, while in the former the unshi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Table-lookup Synthesis
Wavetable synthesis is a sound synthesis technique used to create quasi-periodic waveforms often used in the production of musical tones or notes. Development Wavetable synthesis was invented by Max Mathews in 1958 as part of MUSIC II. MUSIC II “had four-voice polyphony and was capable of generating sixteen wave shapes via the introduction of a wavetable oscillator.” Hal Chamberlin discussed wavetable synthesis in Byte's September 1977 issue. Wolfgang Palm of Palm Products GmbH (PPG) developed his version in the late 1970s and published it in 1979. The technique has since been used as the primary synthesis method in synthesizers built by PPG and Waldorf Music and as an auxiliary synthesis method by Ensoniq and Access. It is currently used in hardware synthesizers from Waldorf Music and in software synthesizers for PCs and tablets, including apps offered by PPG and Waldorf, among others. It was also independently developed by Michael McNabb, who used it in his 1978 ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Sampler (musical Instrument)
A sampler is an electronic or digital musical instrument which uses sound recordings (or " samples") of real instrument sounds (e.g., a piano, violin, trumpet, or other synthesizer), excerpts from recorded songs (e.g., a five-second bass guitar riff from a funk song) or found sounds (e.g., sirens and ocean waves). The samples are loaded or recorded by the user or by a manufacturer. These sounds are then played back by means of the sampler program itself, a MIDI keyboard, sequencer or another triggering device (e.g., electronic drums) to perform or compose music. Because these samples are usually stored in digital memory, the information can be quickly accessed. A single sample may often be pitch-shifted to different pitches to produce musical scales and chords. Often samplers offer filters, effects units, modulation via low frequency oscillation and other synthesizer-like processes that allow the original sound to be modified in many different ways. Most samplers have Mu ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Voltage-controlled Oscillator
A microwave (12–18GHz) voltage-controlled oscillator A voltage-controlled oscillator (VCO) is an electronic oscillator whose oscillation frequency is controlled by a voltage input. The applied input voltage determines the instantaneous oscillation frequency. Consequently, a VCO can be used for frequency modulation (FM) or phase modulation (PM) by applying a modulating signal to the control input. A VCO is also an integral part of a phase-locked loop. VCOs are used in synthesizers to generate a waveform whose pitch can be adjusted by a voltage determined by a musical keyboard or other input. A voltage-to-frequency converter (VFC) is a special type of VCO designed to be very linear in frequency control over a wide range of input control voltages. Types VCOs can be generally categorized into two groups based on the type of waveform produced. * ''Linear'' or ''harmonic oscillators'' generate a sinusoidal waveform. Harmonic oscillators in electronics usually consist of a reson ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Oberheim Xpander
The Oberheim Xpander () is an analog synthesizer launched by Oberheim in 1984 and discontinued in 1988. It is essentially a keyboardless, six-voice version of the Matrix-12 (released a year later, in 1985). Utilizing Oberheim's Matrix Modulation technology, the Xpander combined analog audio generation (VCOs, VCF and VCAs) with the flexibility of digital controls logic. The Xpander "Owner's Manual, First Edition" describes the technology as this: :"An analogy to the Matrix Modulation system might be all of those millions of wires that existed on the first modular synthesizers. As cumbersome as all of that wiring was, it allowed the user to connect any input to any output, resulting in sophistication and flexibility unmatched by any programmable synthesizer...until now." Architecture Analog Components Each of the six voices of the Xpander is completely independent. That is to say, each could be configured to create a different timbre - this is accomplished via the multi-patch ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Oberheim SEM
Oberheim is an American synthesizer manufacturer founded in 1969 by Tom Oberheim. History and products Tom Oberheim founded the company in 1969, originally as a designer and contract manufacturer of electronic effects devices for Maestro (most notably the Maestro PS-1A Phase Shifter),, and briefly a retail dealer for ARP Instruments, eventually designing the company's first Oberheim-branded product, the Oberheim DS-2, one of the first digital music sequencers. In 1975 Oberheim introduced the Synthesizer Expander Module (SEM) to complement the DS-2 sequencer and enable a user to play one synthesizer while the DS-2 played a sequence on another. The SEM featured a two-pole filter that could operate as a low-pass, high-pass, band-pass, or band-reject filter, giving it a different sound than the Moog and ARP filters popular at the time. The company later combined multiple SEM modules with a digitally-scanned keyboard and a 2-channel voltage-controlled sequencer to create a series ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Korg MS-20
The Korg MS-20 is a patchable semi-modular monophonic analog synthesizer which Korg released in 1978 and which was in production until 1983. It was part of Korg's MS series of instruments, which also included the single oscillator MS-10, the keyboardless MS-50 module, the SQ-10 sequencer, and the VC-10 Vocoder. Additional devices included the MS-01 Foot Controller, MS-02 Interface, MS-03 Signal Processor, and MS-04 Modulation Pedal. Although the MS-20 follows a conventional subtractive synthesis architecture of oscillators/filter/vca, its patch panel allows some rerouting of both audio and modulation, and it includes an external signal processor. This flexibility led to its resurgence during the analog revival of the late 1990s. In 2013, Korg responded to a revived interest in monophonic analog synthesizers by reintroducing the MS-20 in a reduced-sized form, as the MS-20 Mini. Apart from being 86% of the size of the original, the use of 1/8" jacks on the patch area, and the a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> Korg MS-20")