|
Dodge Ram SRT-10
The Dodge Ram SRT-10 is a sport pickup truck that was produced by American automaker Dodge in limited numbers. It was introduced at the January 2002 North American International Auto Show, but was not put into production until 2004. Development The Dodge Ram SRT was created by DaimlerChrysler's PVO ( Performance Vehicle Operations) division, using Dodge Viper and Plymouth Prowler engineers. Extensive wind tunnel testing was used in styling the exterior of the Ram SRT-10. This is the second time that Dodge has put a Viper engine into a Ram pickup. At the 1996 Chicago Auto Show, Dodge introduced a concept Dodge Ram with a Viper Generation 2 engine, but it was not put into production. The Dodge Ram VTS was painted Banzai Blue with dual white skunk stripes, housed an 8.0 L (488 cid) V10, a six-speed Borg-Warner manual gearbox, and Viper GTS wheels wrapped in BF Goodrich 275/60-HR17 Comp T/A HR4 tires. Overview The SRT-10 featured a Chrysler 8.3 liter V10 that was first used in the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
DaimlerChrysler
The Mercedes-Benz Group AG (previously named Daimler-Benz, DaimlerChrysler and Daimler) is a German multinational automotive corporation headquartered in Stuttgart, Baden-Württemberg, Germany. It is one of the world's leading car manufacturers. Daimler-Benz was formed with the merger of Benz & Cie. and Daimler Motoren Gesellschaft in 1926. The company was renamed DaimlerChrysler upon acquiring the American automobile manufacturer Chrysler Corporation in 1998, and was again renamed Daimler AG upon divestment of Chrysler in 2007. In 2021, Daimler AG was the second-largest German automaker and the sixth-largest worldwide by production. In February 2022, Daimler was renamed Mercedes-Benz Group. The Mercedes-Benz Group's marques are Mercedes-Benz for cars and vans (including Mercedes-AMG and Mercedes-Maybach) and Smart. It has shares in other vehicle manufactures such as Daimler Truck, Denza, BAIC Motor and Aston Martin. By unit sales, the Mercedes-Benz Group is the thirteenth-l ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Dodge Viper
The Dodge Viper is a sports car that was manufactured by Dodge (by SRT for 2013 and 2014), a division of American car manufacturer FCA US LLC from 1992 until 2017, having taken a brief hiatus in 2007 and from 2010 to 2012. Production of the two-seat super car began at New Mack Assembly Plant in 1991 and moved to Conner Avenue Assembly Plant in October 1995. Although Chrysler considered ending production because of serious financial problems, on September 14, 2010, the then chief executive Sergio Marchionne announced and previewed a new model of the Viper for 2012. In 2014, the Viper was named number 10 on the "Most American Cars" list, meaning 75% or more of its parts are manufactured in the U.S. The Viper was eventually discontinued in 2017 after being in production for 26 years. The 0-60 mph time on a Viper varies from around 3.5-seconds to 4.5 seconds. Top speed ranges from 160 mph to over 200 mph, depending on variant and year. Development history The Viper was initial ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tonneau Cover
A tonneau ( or ) is an area of a car or truck open at the top. It can be for passengers or cargo. A tonneau cover in current automotive terminology is a hard or soft cover that spans the back of a pickup truck to protect the load or to improve aerodynamics. Tonneau covers come in many styles that fold, retract, or tilt open, and can be locked shut. Common materials used include steel, aluminium, canvas, PVC, fibreglass, and carbon fibre. Tonneau covers are also used to cover and protect open areas of boats. Many of these covers are made of waterproofed canvas and are held in place by snaps. The older, original tonneau covers were used to protect unoccupied passenger seats in convertibles and roadsters, and the cargo bed of a pickup truck or coupé utility. Hard tonneau covers open by a hinging or folding mechanism while segmented or soft covers open by rolling up or folding. Truck and car tonneau covers keep items out of the sun and out of the sight of potential thieves. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Chassis
A chassis (, ; plural ''chassis'' from French châssis ) is the load-bearing framework of an artificial object, which structurally supports the object in its construction and function. An example of a chassis is a vehicle frame, the underpart of a motor vehicle, on which the body is mounted; if the running gear such as wheels and transmission, and sometimes even the driver's seat, are included, then the assembly is described as a rolling chassis. Examples of use Vehicles In the case of vehicles, the term ''rolling chassis'' means the frame plus the "running gear" like engine, transmission, drive shaft, differential and suspension. An underbody (sometimes referred to as "coachwork"), which is usually not necessary for integrity of the structure, is built on the chassis to complete the vehicle. For commercial vehicles, a rolling chassis consists of an assembly of all the essential parts of a truck without the body to be ready for operation on the road. A car chassis wi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Dana 60
The Dana/Spicer Model 60 is an automotive axle manufactured by Dana Holding Corporation and used in OEM pickup and limited passenger car applications by Chevrolet, Dodge, Chrysler, Jeep, Ford and Land Rover. There are front and rear versions of the Dana 60. It can be readily identified by its straight axle tubes, 10 bolt asymmetrical cover, and a "60" cast into the housing. Gross axle weight ratings are often lowered by the vehicle manufacturer for safety and tire reasons. They are also lowered to reduce loads on other powertrain components such as transmissions and transfer cases. Dana 60 Axles are also increasingly swapped into many custom offroad applications to accommodate larger tires and deep compound gearing with locking differentials. __TOC__ General specifications Every Dana 60 that was originally manufactured by Dana Corp (i.e. not aftermarket) is stamped with a build date and bill of materials on the back of the right hand axle tube. * Gross Axle Weight Rating ( ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
TorqueFlite
TorqueFlite (also seen as Torqueflite) is the trademarked name of Chrysler Corporation's automatic transmissions, starting with the three-speed unit introduced late in the 1956 model year as a successor to Chrysler's two-speed PowerFlite. In the 1990s, the TorqueFlite name was dropped in favor of alphanumeric designations, although the latest Chrysler eight-speed automatic transmission has revived the name. History Torqueflites use torque converters and Simpson gearsets, two identical planetary gearsets sharing a common sun gear. Chrysler Corporation licensed this gearset from Simpson in 1955. The first Torqueflites provided three speeds forward plus reverse. Gear ratios were 2.45:1 in first, 1.45 in second, and 1.00 in third. The transmission was controlled by a series of pushbuttons located on the vehicle's dashboard. The buttons were generally at the extreme driver's side end of the dash, i.e., the left in left-hand drive vehicles, and the right in right-hand drive ones. How ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Stroke (engines)
In the context of an internal combustion engine, the term stroke has the following related meanings: * A phase of the engine's cycle (e.g. compression stroke, exhaust stroke), during which the piston travels from top to bottom or vice versa. * The type of power cycle used by a piston engine (e.g. two-stroke engine, four-stroke engine). * "Stroke length", the distance travelled by the piston during each cycle. The stroke length––along with bore diameter––determines the engine's displacement. Phases in the power cycle Commonly used engine phases or strokes (i.e. those used in a four-stroke engine) are described below. Other types of engines can have very different phases. Induction-intake stroke The induction stroke is the first phase in a four-stroke (e.g. Otto cycle or Diesel cycle) engine. It involves the downward movement of the piston, creating a partial vacuum that draws a air-fuel mixture (or air alone, in the case of a direct injection engine) into the combusti ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bore (engines)
In a piston engine, the bore (or cylinder bore) is the diameter of each cylinder. Engine displacement is calculated based on bore, stroke length and the number of cylinders: displacement = The stroke ratio, determined by dividing the bore by the stroke, traditionally indicated whether an engine was designed for power at high engine speeds (rpm) or torque at lower engine speeds. The term "bore" can also be applied to the bore of a locomotive cylinder or steam engine pistons. Steam locomotive The term bore also applies to the cylinder of a steam locomotive or steam engine. See also * Bore pitch * Compression ratio * Engine displacement Engine displacement is the measure of the cylinder volume swept by all of the pistons of a piston engine, excluding the combustion chambers. It is commonly used as an expression of an engine's size, and by extension as a loose indicator of the ... References {{Steam engine configurations Engine technology ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cylinder Block
In an internal combustion engine, the engine block is the structure which contains the cylinders and other components. In an early automotive engine, the engine block consisted of just the cylinder block, to which a separate crankcase was attached. Modern engine blocks typically have the crankcase integrated with the cylinder block as a single component. Engine blocks often also include elements such as coolant passages and oil galleries. The term "cylinder block" is often used interchangeably with "engine block", although technically, the block of a modern engine (i.e. multiple cylinders integrated with another component) would be classified as a monobloc. __TOC__ Construction The main structure of an engine typically consists of the cylinders, coolant passages, oil galleries, crankcase, and cylinder head(s). The first production engines of the 1880s to 1920s usually used separate components for each of these elements, which were bolted together during engine assembly. M ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Viper Engine
The Viper engine is a high-performance naturally-aspirated pushrod 2 valves-per-cylinder 90° V10 engine commissioned by Chrysler and built by Lamborghini for use in the Dodge Viper. Despite its large displacement, it is based on a small-block V8. Development Phase SR (1992–2002) SR I (1st generation) The Viper V10 is based on the Chrysler LA engine family and appeared with the Dodge Viper in 1992. It was conceived and prototyped as a Magnum 5.9 with two extra cylinders and a longer stroke of . The first-generation Viper V10 engine had a displacement of and produced at 4600 rpm and of torque at 3600 rpm. SR II (2nd generation) The second-generation engine, also displacing 8.0 L, produced @ 5200 rpm and of torque @ 3700 rpm. 1999 was the last year for forged pistons until the 5th gen engine was released in 2012. There was a emissions transition happening around this time that may have influenced this. Phase ZB (2003–2010) ZB I (3rd generation) The third-g ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Torque
In physics and mechanics, torque is the rotational equivalent of linear force. It is also referred to as the moment of force (also abbreviated to moment). It represents the capability of a force to produce change in the rotational motion of the body. The concept originated with the studies by Archimedes of the usage of levers, which is reflected in his famous quote: "''Give me a lever and a place to stand and I will move the Earth''". Just as a linear force is a push or a pull, a torque can be thought of as a twist to an object around a specific axis. Torque is defined as the product of the magnitude of the perpendicular component of the force and the distance of the line of action of a force from the point around which it is being determined. The law of conservation of energy can also be used to understand torque. The symbol for torque is typically \boldsymbol\tau, the lowercase Greek letter ''tau''. When being referred to as moment of force, it is commonly denoted by . In ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Ram SRT Engine
Ram, ram, or RAM may refer to: Animals * A male sheep * Ram cichlid, a freshwater tropical fish People * Ram (given name) * Ram (surname) * Ram (director) (Ramsubramaniam), an Indian Tamil film director * RAM (musician) (born 1974), Dutch * Raja Ram (musician) (Ronald Rothfield), Australian * Ram Dass (Richard Alpert), US spiritual teacher and author * Kavitark Ram Shriram (born 1950s), Google founding board member * Ram Herrera, a Tejano musician Religion * Rama, incarnation of the god Vishnu in Hinduism * Ram and Rud, progenitors of the second generation of humans in Mandaeism Places * Ram, Serbia, Veliko Gradište * Lake Ram, Golan Heights, Syria * Ram Island (other), several islands with the name * Ram Fortress, Serbia * Ram Range, a mountain range in the Canadian Rockies * Ram River in Alberta, Canada * Ramingining Airport, IATA airport code "RAM" Arts, entertainment, and media * ''Ram'' (album), a 1971 album by Paul and Linda McCartney * RAM (band), Port-au ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
