|
Distributed Split Multi-Link Trunking
Multi-link trunking (MLT) is a link aggregation technology developed at Nortel in 1999. It allows grouping several physical Ethernet links into one logical Ethernet link to provide fault-tolerance and high-speed links between routers, switches, and servers. MLT allows the use of several links (from 2 up to 8) and combines them to create a single fault-tolerant link with increased bandwidth. This produces server-to-switch or switch-to-switch connections that are up to 8 times faster. Prior to MLT and other aggregation techniques, parallel links were underutilized due to Spanning Tree Protocol’s loop protection. Fault-tolerant design is an important aspect of Multi-Link Trunking technology. Should any one or more than one link fail, the MLT technology will automatically redistribute traffic across the remaining links. This automatic redistribution is accomplished in less than half a second (typically less than 100 millisecond) so no outage is noticed by end users. This high speed ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
DSMLT
Multi-link trunking (MLT) is a link aggregation technology developed at Nortel in 1999. It allows grouping several physical Ethernet links into one logical Ethernet link to provide fault-tolerance and high-speed links between routers, switches, and servers. MLT allows the use of several links (from 2 up to 8) and combines them to create a single fault-tolerant link with increased bandwidth. This produces server-to-switch or switch-to-switch connections that are up to 8 times faster. Prior to MLT and other aggregation techniques, parallel links were underutilized due to Spanning Tree Protocol’s loop protection. Fault-tolerant design is an important aspect of Multi-Link Trunking technology. Should any one or more than one link fail, the MLT technology will automatically redistribute traffic across the remaining links. This automatic redistribution is accomplished in less than half a second (typically less than 100 millisecond) so no outage is noticed by end users. This high speed ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Avaya ERS 5500
The Ethernet Routing Switch 5500 Series or (ERS 5500) is a series of stackable, Layer 3 switches used in computer networking. The ERS 5000 was originally designed by Nortel and is now manufactured by Avaya. Up to 8 ERS 5000 Series Switches may be stacked in a 640 Gbit/s fast stacking configuration. This Switch was used as the access layer device for the 2010 Winter Olympics games. The 817 Access Switches supported 8782 Voice-over-IP telephones. The Switches have an integrated time-domain reflectometer (TDR) built into every copper port, providing diagnostic monitoring and troubleshooting capabilities of the connected cables allowing for the troubleshooting of cable defects (crimped, cut, shorted or damaged cables) from the telnet, SNMP, web and console management interfaces. This test provides a very reliable test to identify if the cable is good or faulty. The Switches also include an integrated packet sniffer built into every port that can export the information on ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Spanning Tree Protocol
The Spanning Tree Protocol (STP) is a network protocol that builds a loop-free logical topology for Ethernet networks. The basic function of STP is to prevent bridge loops and the broadcast radiation that results from them. Spanning tree also allows a network design to include backup links providing fault tolerance if an active link fails. As the name suggests, STP creates a spanning tree that characterizes the relationship of nodes within a network of connected layer-2 bridges, and disables those links that are not part of the spanning tree, leaving a single active path between any two network nodes. STP is based on an algorithm that was invented by Radia Perlman while she was working for Digital Equipment Corporation. In 2001, the IEEE introduced Rapid Spanning Tree Protocol (RSTP) as 802.1w. RSTP provides significantly faster recovery in response to network changes or failures, introducing new convergence behaviors and bridge port roles to do this. RSTP was designed to be b ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Video SMLT Presentation
Video is an electronic medium for the recording, copying, playback, broadcasting, and display of moving visual media. Video was first developed for mechanical television systems, which were quickly replaced by cathode-ray tube (CRT) systems which, in turn, were replaced by flat panel displays of several types. Video systems vary in display resolution, aspect ratio, refresh rate, color capabilities and other qualities. Analog and digital variants exist and can be carried on a variety of media, including radio broadcast, magnetic tape, optical discs, computer files, and network streaming. History Analog video Video technology was first developed for mechanical television systems, which were quickly replaced by cathode-ray tube (CRT) television systems, but several new technologies for video display devices have since been invented. Video was originally exclusively a live technology. Charles Ginsburg led an Ampex research team developing one of the first practical video ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
PIM Sparse Mode
400px, Example of a multicast network architecture Protocol-Independent Multicast (PIM) is a family of multicast routing protocols for Internet Protocol (IP) networks that provide one-to-many and many-to-many distribution of data over a LAN, WAN or the Internet. It is termed ''protocol-independent'' because PIM does not include its own topology discovery mechanism, but instead uses routing information supplied by other routing protocols. PIM is not dependent on a specific unicast routing protocol; it can make use of any unicast routing protocol in use on the network. PIM does not build its own routing tables. PIM uses the unicast routing table for reverse-path forwarding. There are four variants of PIM: * PIM Sparse Mode (PIM-SM) explicitly builds unidirectional shared trees rooted at a ''rendezvous point'' (RP) per group, and optionally creates shortest-path trees per source. PIM-SM generally scales fairly well for wide-area usage. * PIM Dense Mode (PIM-DM) uses dense mul ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Open Shortest Path First
Open Shortest Path First (OSPF) is a routing protocol for Internet Protocol (IP) networks. It uses a link state routing (LSR) algorithm and falls into the group of interior gateway protocols (IGPs), operating within a single autonomous system (AS). OSPF gathers link state information from available routers and constructs a topology map of the network. The topology is presented as a routing table to the Internet Layer for routing packets by their destination IP address. OSPF supports Internet Protocol Version 4 (IPv4) and Internet Protocol Version 6 (IPv6) networks and supports the Classless Inter-Domain Routing (CIDR) addressing model. OSPF is widely used in large enterprise networks. IS-IS, another LSR-based protocol, is more common in large service provider networks. Originally designed in the 1980s, OSPF is defined for IPv4 in protocol version 2 by RFC 2328 (1998)., Updated by RFC 5709, RFC 6549, RFC 6845, RFC 6860, RFC 7474, RFC 8042. The updates for IPv6 are specifi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
End Station
In networking jargon, a computer, phone, or internet of things device connected to a computer network is sometimes referred to as an end system or end station, because it sits at the edge of the network. The end user directly interacts with an end system that provides information or services. End systems that are connected to the Internet are also referred to as internet hosts; this is because they host (run) internet applications such as a web browser or an email retrieval program. The Internet's end systems include some computers with which the end user does not directly interact. These include mail servers, web servers, or database servers. With the emergence of the internet of things, household items (such as toasters and refrigerators) as well as portable, handheld computers and digital cameras are all being connected to the internet as end systems. End systems are generally connected to each other using switching devices known as routers rather than using a single com ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Address Resolution Protocol
The Address Resolution Protocol (ARP) is a communication protocol used for discovering the link layer address, such as a MAC address, associated with a given internet layer address, typically an IPv4 address. This mapping is a critical function in the Internet protocol suite. ARP was defined in 1982 by , which is Internet Standard STD 37. ARP has been implemented with many combinations of network and data link layer technologies, such as IPv4, Chaosnet, DECnet and Xerox PARC Universal Packet (PUP) using IEEE 802 standards, FDDI, X.25, Frame Relay and Asynchronous Transfer Mode (ATM). In Internet Protocol Version 6 (IPv6) networks, the functionality of ARP is provided by the Neighbor Discovery Protocol (NDP). Operating scope The Address Resolution Protocol is a request-response protocol. Its messages are directly encapsulated by a link layer protocol. It is communicated within the boundaries of a single network, never routed across internetworking nodes. Packet structure The ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Inter-Switch Trunk
InterSwitch Trunk (IST) is one or more parallel point-to-point links (Link aggregation) that connect two switches together to create a single logical switch. The IST allows the two switches to share addressing information, forwarding tables, and state information, permitting rapid (less than one second) fault detection and forwarding path modification. The link may have different names depending on the vendor. For example, Brocade calls this an Inter-Chassis Link (ICL). Cisco calls this a VSL (Virtual Switch Link). Edge switches, servers or PCs see the two aggregate switches as one large switch. This allows any vendor's equipment configured to use the IEEE 802.3ad static link aggregation protocol to connect to both switches and take advantage of load balancing, redundant connections. The IST protocol was developed by Nortel (now acquired by Avaya, which is now acquired by Extreme Networks) to enhance the capabilities of Link aggregation, and is required to be configured prior to ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
SMLT
Multi-link trunking (MLT) is a link aggregation technology developed at Nortel in 1999. It allows grouping several physical Ethernet links into one logical Ethernet link to provide fault-tolerance and high-speed links between routers, switches, and servers. MLT allows the use of several links (from 2 up to 8) and combines them to create a single fault-tolerant link with increased bandwidth. This produces server-to-switch or switch-to-switch connections that are up to 8 times faster. Prior to MLT and other aggregation techniques, parallel links were underutilized due to Spanning Tree Protocol’s loop protection. Fault-tolerant design is an important aspect of Multi-Link Trunking technology. Should any one or more than one link fail, the MLT technology will automatically redistribute traffic across the remaining links. This automatic redistribution is accomplished in less than half a second (typically less than 100 millisecond) so no outage is noticed by end users. This high speed ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
