|
Dewoitine HD.780
The Dewoitine HD.780 was a prototype French fighter-floatplane designed and built from 1938–40. It was a single-seat, single-engined aircraft based on the Dewoitine D.520 land-based fighter. A single example was built but was abandoned unflown, and was scrapped. Design and development In 1938, the French Navy issued a requirement (C1-A75) for a fighter floatplane that could be launched from catapults aboard battleships and cruisers to give fighter protection for the fleet out of range of shore-based fighters. The new fighter would replace the Loire 210, twenty of which had been ordered in 1937, which were yet to enter service. Two designs were evaluated by the French Navy, one from Potez (the Potez-CAMS 170), and one from Émile Dewoitine's design bureau, the Dewoitine HD.780. The Potez design progressed no further than a full-scale mock-up, but construction of a prototype of the Dewoitine fighter started at the Bagnères-de-Bigorre factory of the railway engine manufacturer So ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Dewoitine D
Constructions Aéronautiques Émile Dewoitine was a French aircraft manufacturer established by Émile Dewoitine at Toulouse in October 1920. The company's initial products were a range of metal parasol-wing fighters which were largely ignored by the French Air Force but purchased in large quantities abroad and licence-built in Italy, Switzerland, and Czechoslovakia. The company was liquidated in January 1927, with the only remaining active programme (the D.27) being transferred to EKW in Switzerland. The company was re-established in Paris in March the following year as Société Aéronautique Française (Avions Dewoitine) or SAF. After briefly continuing D.27 production, the reconstituted firm produced a range of fighters that became a mainstay of the French airforce during the 1930s, the D.500 family. It also developed important civilian airliners, such as the D.333 and its derivative the D.338, designed for pioneering routes to French Indochina (Vietnam), and eventually Hon ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Hispano-Suiza 12Y
The Hispano-Suiza 12Y was an aircraft engine produced by Hispano-Suiza for the French Air Force before the Second World War. The 12Y became the primary French 1,000 hp (750 kW) class engine and was used in a number of famous aircraft, including the Morane-Saulnier M.S.406 and Dewoitine D.520. Its design was based on the earlier, and somewhat smaller, 12X. The 12X did not see widespread use before the 12Y replaced it and became one of the most powerful French designs on the eve of the war. The 12Z was being designed but this was ended by the fall of France and the German occupation. The 12Y was produced under Hispano-Suiza licence in the Soviet Union as the Klimov M-100. This design led to the highly successful Klimov VK-105 series that powered the Yakovlev and Lavochkin fighters as well as the Petlyakov Pe-2 bomber. Licensed production of the early models was also undertaken in Czechoslovakia as the Avia HS 12Ydrs and in Switzerland as the HS-77. Design and devel ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Low-wing Aircraft
A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple planes. A monoplane has inherently the highest efficiency and lowest drag of any wing configuration and is the simplest to build. However, during the early years of flight, these advantages were offset by its greater weight and lower manoeuvrability, making it relatively rare until the 1930s. Since then, the monoplane has been the most common form for a fixed-wing aircraft. Characteristics Support and weight The inherent efficiency of the monoplane is best achieved in the cantilever wing, which carries all structural forces internally. However, to fly at practical speeds the wing must be made thin, which requires a heavy structure to make it strong and stiff enough. External bracing can be used to improve structural efficiency, reducing weight and cost. For a wing of a given size, the weight reduction allows it to fly slower ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
World War II French Fighter Aircraft
In its most general sense, the term "world" refers to the totality of entities, to the whole of reality or to everything that is. The nature of the world has been conceptualized differently in different fields. Some conceptions see the world as unique while others talk of a "plurality of worlds". Some treat the world as one simple object while others analyze the world as a complex made up of many parts. In '' scientific cosmology'' the world or universe is commonly defined as " e totality of all space and time; all that is, has been, and will be". '' Theories of modality'', on the other hand, talk of possible worlds as complete and consistent ways how things could have been. ''Phenomenology'', starting from the horizon of co-given objects present in the periphery of every experience, defines the world as the biggest horizon or the "horizon of all horizons". In '' philosophy of mind'', the world is commonly contrasted with the mind as that which is represented by the mind. ' ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
V12 Engine
A V12 engine is a twelve-cylinder piston engine where two banks of six cylinders are arranged in a V configuration around a common crankshaft. V12 engines are more common than V10 engines. However, they are less common than V8 engines. The first V12 engine was built in 1904 for use in racing boats. Due to the balanced nature of the engine and the smooth delivery of power, V12 engines were found in early luxury automobiles, boats, aircraft, and tanks. Aircraft V12 engines reached their apogee during World War II, following which they were mostly replaced by jet engines. In Formula One racing, V12 engines were common during the late 1960s and early 1990s. Applications of V12 engines in the 21st century have been as marine engines, in railway locomotives, as large stationary power as well as in some European sports and luxury cars. Design Balance and smoothness Each bank of a V12 engine essentially functions as a straight-six engine, which by itself has perfect primary and ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Hispano-Suiza HS 12Y
The Hispano-Suiza 12Y was an aircraft engine produced by Hispano-Suiza for the French Air Force before the Second World War. The 12Y became the primary French 1,000 hp (750 kW) class engine and was used in a number of famous aircraft, including the Morane-Saulnier M.S.406 and Dewoitine D.520. Its design was based on the earlier, and somewhat smaller, 12X. The 12X did not see widespread use before the 12Y replaced it and became one of the most powerful French designs on the eve of the war. The 12Z was being designed but this was ended by the fall of France and the German occupation. The 12Y was produced under Hispano-Suiza licence in the Soviet Union as the Klimov M-100. This design led to the highly successful Klimov VK-105 series that powered the Yakovlev and Lavochkin fighters as well as the Petlyakov Pe-2 bomber. Licensed production of the early models was also undertaken in Czechoslovakia as the Avia HS 12Ydrs and in Switzerland as the HS-77. Design and d ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Armistice Of 22 June 1940
The Armistice of 22 June 1940 was signed at 18:36 near Compiègne, France, by officials of Nazi Germany and the Third French Republic. It did not come into effect until after midnight on 25 June. Signatories for Germany included Wilhelm Keitel, a senior military officer of the Wehrmacht (the German armed forces), while those on the French side held lower ranks including General Charles Huntziger. Following the decisive German victory in the Battle of France (10 May – 21 June 1940) during World War II, this armistice established a German occupation zone in Northern and Western France that encompassed about three fifths of France's European territory, including all English Channel and Atlantic Ocean ports. The remainder of the country was to be left unoccupied, although the new regime which replaced the Third Republic was mutually recognized as the legitimate government of all of Metropolitan France except Alsace-Lorraine. The French were also permitted to retain control of ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Darne Machine Gun
The Darne machine gun is a machine gun of French origin. Development The French gun-making company Darne, which became famous for its innovative shotguns, began making military weapons in 1915, when it was contracted by French government to manufacture Lewis machine guns. In 1916 this same company announced the development of its own indigenous design of machine gun. This belt-fed weapon was designed especially for rapid manufacturing techniques, and without any unnecessary refinements typical for most contemporary small arms. External finish and appearance of the Darne machine gun was crude, but worked well and its price was much lower than of any contemporary weapon with comparable combat characteristics. The French Army tested Darne machine guns during 1917/1918, but the Great War ended before production contracts could have been signed. Despite this, during the 1920s and 1930s the Darne company managed to refine an aircraft variant of the machine gun to the point where it w ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Hispano-Suiza HS
Hispano-Suiza () is a Spanish automotive–engineering company. It was founded in 1904 by Marc Birkigt and Damian Mateu as an automobile manufacturer and eventually had several factories in Spain and France that produced luxury cars, aircraft engines, trucks and weapons. In 1923, its French luxury car arm became a semi-autonomous partnership with the Spanish parent company. In 1946, the Spanish parent company sold all of its Spanish automotive assets to Enasa, a Spanish state-owned vehicle manufacturer, and the French arm continued as an independent aviation engine and components manufacturer under the Hispano-Suiza name. In 1968, Hispano-Suiza was taken over by the aerospace company Snecma, which is now part of the French Safran, Safran Group. An attempt to relaunch the marque was made by the company Hispano Suiza Cars associated with the Peralada Group (owned by the Suqué Mateu family) in 2019 with a fully-electric car. History Early years In 1898, a Spanish artillery captain, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Fowler Flap
A flap is a high-lift device used to reduce the stalling speed of an aircraft wing at a given weight. Flaps are usually mounted on the wing trailing edges of a fixed-wing aircraft. Flaps are used to reduce the take-off distance and the landing distance. Flaps also cause an increase in drag so they are retracted when not needed. The flaps installed on most aircraft are partial-span flaps; spanwise from near the wing root to the inboard end of the ailerons. When partial-span flaps are extended they alter the spanwise lift distribution on the wing by causing the inboard half of the wing to supply an increased proportion of the lift, and the outboard half to supply a reduced proportion of the lift. Reducing the proportion of the lift supplied by the outboard half of the wing is accompanied by a reduction in the angle of attack on the outboard half. This is beneficial because it increases the margin above the stall of the outboard half, maintaining aileron effectiveness and reduci ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Aircraft Catapult
An aircraft catapult is a device used to allow aircraft to take off from a very limited amount of space, such as the deck of a vessel, but can also be installed on land-based runways in rare cases. It is now most commonly used on aircraft carriers, as a form of assisted take off. In the form used on aircraft carriers the catapult consists of a track, or slot, built into the flight deck, below which is a large piston or ''shuttle'' that is attached through the track to the nose gear of the aircraft, or in some cases a wire rope, called a catapult bridle, is attached to the aircraft and the catapult shuttle. Other forms have been used historically, such as mounting a launching cart holding a seaplane on a long girder-built structure mounted on the deck of a warship or merchant vessel, but most catapults share a similar sliding track concept. Different means have been used to propel the catapult, such as weight and derrick, gunpowder, flywheel, air pressure, hydraulic, and steam ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Gull Wing
The gull wing is an aircraft wing configuration, known also as ''Pulaski wings'', with a prominent bend in the wing inner section towards the wing root. Its name is derived from the seabirds which it resembles. Numerous aircraft have incorporated such wings for a diverse range of purposes. The gull wing was commonly used to improve visibility in a high wing arrangement, because such wing could be thinnest by the fuselage, and in theory should limit pilot's view no more than A-pillars of a windscreen in a car body. Gliders were the first aircraft to feature the gull wing, starting with the Weltensegler in 1921; it was not until the record-breaking Fafnir at the end of that decade did the configuration gain popularity. Beyond becoming popular for the next three decades amongst high-performance gliders, various ground-based aircraft and flying boats also adopted various forms of gull wings. It rose to particular prominence in Poland, where the Polish aviation designer Zygmunt P ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
%2C_F-14_on_catapult.jpg "Click for more on -> Aircraft Catapult")
