|
Creswick Railway Station
Creswick railway station is located on the Mildura line in Victoria, Australia. It serves the town of Creswick, and the original station opened on 7 July 1874.Creswick Vicsig History The station closed on 12 September 1993, after '''' service to was withdrawn and replaced by road coaches. A new platform, inaugurated on 25 July 2010, was constructed to cater for the restoration of passenger services from |
Public Transport Victoria
Public Transport Victoria (PTV) is the brand name for public transport in the Australian state of Victoria, Australia, Victoria. It was the trading name of the Go Public Transport Development Authority (PTDA), a now-defunct statutory authority in Victoria, responsible for providing, coordinating, and promoting public transport. The PTV began operating on 2 April 2012, taking over many of the responsibilities previously exercised by the Director of Public Transport and the Department of Transport (Victoria, 2008–13), Department of Transport. It also took over the marketing of public transport in Victoria from Metlink and Metlink#Viclink, Viclink, as well as responsibility for the myki ticketing system, formerly handled by the Transport Ticketing Authority. PTV's functions were transferred to the Department of Transport (Victoria), Department of Transport on 1 July 2019. However, PTV continues to exist as the brand for public transport services in Victoria. Governance PTV is ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tunnel
A tunnel is an underground passageway, dug through surrounding soil, earth or rock, and enclosed except for the entrance and exit, commonly at each end. A pipeline is not a tunnel, though some recent tunnels have used immersed tube construction techniques rather than traditional tunnel boring methods. A tunnel may be for foot or vehicular road traffic, for rail traffic, or for a canal. The central portions of a rapid transit network are usually in the tunnel. Some tunnels are used as sewers or aqueducts to supply water for consumption or for hydroelectric stations. Utility tunnels are used for routing steam, chilled water, electrical power or telecommunication cables, as well as connecting buildings for convenient passage of people and equipment. Secret tunnels are built for military purposes, or by civilians for smuggling of weapons, contraband, or people. Special tunnels, such as wildlife crossings, are built to allow wildlife to cross human-made barriers safely. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Interlocking
In railway signalling, an interlocking is an arrangement of signal apparatus that prevents conflicting movements through an arrangement of tracks such as junction (rail), junctions or crossings. The signalling appliances and Track (rail transport), tracks are sometimes collectively referred to as an ''interlocking plant''. An interlocking is designed so that it is impossible to display a signal to proceed unless the route to be used is proven safe. Interlocking is a safety measure designed to prevent signals and Railroad switch, points/switches from being changed in an improper sequence. For example interlocking would prevent a signal from being changed to indicate a diverging route, unless the corresponding points/switches had been changed first. In North America, the official railroad definition of interlocking is: "''An arrangement of signals and signal appliances so interconnected that their movements must succeed each other in proper sequence''". Configuration and use A ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Railroad Switch
A railroad switch (), turnout, or ''set ofpoints () is a mechanical installation enabling railway trains to be guided from one track to another, such as at a railway junction or where a spur or siding branches off. The most common type of switch consists of a pair of linked tapering rails, known as ''points'' (''switch rails'' or ''point blades''), lying between the diverging outer rails (the ''stock rails''). These points can be moved laterally into one of two positions to direct a train coming from the point blades toward the straight path or the diverging path. A train moving from the narrow end toward the point blades (i.e. it will be directed to one of the two paths, depending on the position of the points) is said to be executing a ''facing-point movement''. For many types of switch, a train coming from either of the converging directions will pass through the switch regardless of the position of the points, as the vehicle's wheels will force the points to move. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Railway Signal
A railway signal is a visual display device that conveys instructions or provides warning of instructions regarding the driver’s authority to proceed. The driver interprets the signal's indication and acts accordingly. Typically, a signal might inform the driver of the speed at which the train may safely proceed or it may instruct the driver to stop. Application and positioning of signals Originally, signals displayed simple stop or proceed indications. As traffic density increased, this proved to be too limiting and refinements were added. One such refinement was the addition of distant signals on the approach to stop signals. The distant signal gave the driver warning that they were approaching a signal which might require a stop. This allowed for an overall increase in speed, since train drivers no longer had to drive at a speed within sighting distance of the stop signal. Under timetable and train order operation, the signals did not directly convey orders to the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Token (railway Signalling)
In railway signalling, a token is a physical object which a train driver is required to have or see before entering onto a particular section of single track. The token is clearly endorsed with the names of the section it belongs to. A token system is more commonly used for single lines because of the greater risk of collision in the event of a mistake being made by a signaller or traincrew, than on double lines. Principle The operation of a bidirectional single track line has the hazard of two trains colliding. The simplest way to prevent such collisions is to have only one train in the section at any given time. Such a system is known as "one-engine-in-steam” (OES) or “one-train working" (OTW). This system is used on some branches of rail networks, and on heritage railways. The main disadvantage is that it restricts the number of train movements that can be made. For a larger railway system, it becomes exceptionally limiting in the level of operations that it allows, wi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Allendale, Victoria
Allendale (aka Allandale) is a town in Victoria, Australia, located north-east of Creswick, in the Shire of Hepburn. At the , Allendale and the surrounding area had a population of 166. The town began as a mining settlement around the Berry Leads mining area. It had a peak population of about 1,500. Allendale once had ten hotels, railway station, post office, bakery, and shops, all of which have closed. The small boarding school located in Leishman Street was sold in 2005. Allendale Post Office opened on 6 May 1881, was known as Allandale from 1885 to 1893, and closed in 1974. Allendale Railway Station was on the North Creswick to Daylesford line. The railway closed in sections with Allendale to Newlyn Newlyn ( kw, Lulyn: Lu 'fleet', Lynn/Lydn 'pool') is a seaside town and fishing port (the largest fishing port in England) in south-west Cornwall, UK.Ordnance Survey: Landranger map sheet 203 ''Land's End'' Newlyn lies on the shore of Mount ... closed on 1 December 1976 ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Newlyn, Victoria
Newlyn is a small, rural town in the Shire of Hepburn, in west-central Victoria, Australia. It is located northeast of Ballarat and northwest of Melbourne. It is 452 metres above sea level. At the , it had a population of 136 across 57 private dwellings. It is located on the Midland Highway. Newlyn North is 2 kilometres away. History and buildings Newlyn was a suitable farming area for Creswick miners as easily-won alluvial gold lessened during the mid-1850s. Many miners were Methodist, and some were from Cornwall, England. The town of Newlyn in the Central Highlands between Ballarat and Daylesford is considered to be named after the village of St. Newlyn East in Cornwall. Newlyn has a general store, a hotel, a hall and a primary school. The Post Office opened on 10 September 1864. A mechanics' institute was opened in 1886, which became the site of the Newlyn Antiques and Nursery. In 1890, Newlyn had two hotels, two churches, a free library (which would also become par ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
North Creswick Railway Station
North Creswick railway station was a small junction station on the Mildura railway line where the Ballarat to Daylesford railway line The Ballarat–Daylesford railway line was a line constructed by the Victorian Railways, branching from North Creswick railway station, near Ballarat, on the Mildura railway line , extending northeast to Daylesford where it connected to the D ... branched to the northeast. Nothing remains of the station. It was 176.407 km from the start of the main line. References Disused railway stations in Victoria (state) {{VictoriaAU-railstation-stub ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Daylesford, Victoria
Daylesford is a spa town located in the foothills of the Great Dividing Range, within the Shire of Hepburn, Victoria (Australia), Victoria, Australia, approximately 108 kilometres north-west of Melbourne. First established in 1852 as a gold-mining town, today Daylesford has a population of 2,548 as of the 2016 Australian census, 2016 census. As one of Australia’s few spa towns, Daylesford is a notable tourist destination. The town’s numerous spas, restaurants and galleries are popular alongside the many gardens and country-house-conversion styled bed and breakfasts. The broader area around the town, including Hepburn Springs, Victoria, Hepburn Springs to the north, is known for its natural spring mineral spas and is the location of over 80 per cent of Australia's effervescent mineral water reserve. It is also the filming location for the third season of ''The Saddle Club'', and scenes from the 2004 film ''Love's Brother''. History Prior to European settlement the area was ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Daylesford Spa Country Railway
The Daylesford Spa Country Railway (which is operated by the Central Highlands Tourist Railway) is a volunteer-operated gauge tourist railway located in Victoria, Australia. It operates on a section of the closed and dismantled Daylesford line, and currently runs services between Daylesford and the hamlet of Bullarto. History Victorian Railways era The original line was opened in two stages, from the mainline junction at Carlsruhe to the town of Trentham, on 16 February 1880. The remainder of the line was opened a month later on 17 March. The line initially had significant goods and passenger traffic, with 50,000 passengers travelling the line in 1884 alone. However, over the next seventy years, both traffic and the quality of line gradually degraded, until the last passenger service was replaced with a road coach in 1978. Reopening as a tourist railway The Central Highlands Tourist Railway was founded two years later, and set about restoring the railway to operating condi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Junction (rail)
A junction, in the context of rail transport, is a place at which two or more rail routes converge or diverge. This implies a physical connection between the tracks of the two routes (assuming they are of the same gauge), provided by ''points'' (US: switches) and signalling. Junctions are important for rail systems, their installation into a rail system can expand route capacity, and have a powerful impact upon on-time performance. Overview In a simple case where two routes with one or two tracks each meet at a junction, a fairly simple layout of tracks suffices to allow trains to transfer from one route to the other. More complicated junctions are needed to permit trains to travel in either direction after joining the new route, for example by providing a triangular track layout. In this latter case, the three points of the triangle may be given different names, for example using points of the compass as well as the name of the overall place. Rail transport operations refer to ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
