|
British Rail Class 445
The PEP Stock were prototype electric multiple units used on British Rail's Southern and Scottish Regions during the 1970s and early 1980s. They were forerunners of the British Rail '' Second Generation'' electric multiple unit fleet. Three units were built, one two-car unit (2001), and two four-car units (4001/4002). Under TOPS, the driving cars were originally classified as Class 461 with the non-driving motor cars as Class 462. They were later reclassified as Class 445 (4PEP) and Class 446 (2PEP). Internal layout was for commuter services; low-backed, bus-style 2+2 seating in open saloons, wide gangways with hanging straps, and no lavatory facilities. They were the first electric multiple units designed by British Rail with electric sliding doors, outside the Scottish Region. They were unable to operate with any other stock due to their new coupling system. Externally, 2001 was finished in unpainted aluminium, while 4001/4002 were painted in all-over Rail Blue. In passeng ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Rail Engineering Limited
British Rail Engineering Limited (BREL) was the railway systems engineering subsidiary of British Rail. Established in 1970, the maintenance arm was split as British Rail Maintenance Limited in 1987, and the design and building of trains was privatised in 1989, purchased by the Swiss-Swedish conglomerate Asea Brown Boveri (40%), Trafalgar House (40%), and a management-employee buy-out (20%). After ABB became the sole shareholder in September 1992, it was subsumed into ABB Transportation. History BREL was established by the British Railways Board on 1 January 1970 to take over the management of its 14 rolling stock maintenance centres, including Ashford, Crewe, Derby Litchurch Lane, Derby Locomotive, Doncaster, Eastleigh, Glasgow, Horwich, Shildon, Swindon, Wolverton, and York. Ashford Works closed in 1981, Shildon in 1984, and Swindon in 1986. In 1987, Doncaster, Eastleigh, Glasgow, and Wolverton were transferred to BR Maintenance. Not all British Rail rolling stock wa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Hanging Strap
In urban public transport, provision is made for standing passengers, often called straphangers or standees, to rationalize operation and to provide extra capacity during rush hour. Occurrence On crowded rapid transit urban lines, while most travelers may be seated during off-peak services, only a limited proportion will be seated during the peak services. The longer the journey, the less willing passengers are to stand. On intercity rail or coach services, the willingness among passengers to stand is often low, or it may even be prohibited, with reserved seating to ensure that all passengers can be seated. In aviation, safety measures require all passengers and crew to be seated during take-off and landing, so airlines do not allow passengers to travel without a seat. However, in 2010, Ryanair, a low-cost airline proposed a "vertical seat" design for use by standing passengers on its aircraft.The Telegraph (London)"Ryanair to sell £5 tickets for standing-room only flights" La ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Rail Class 316 (Picc-Vic)
The British Rail Class 316 was a proposed type of electric multiple unit intended for use on planned urban rail services in Greater Manchester. Intended as part of the family of EMUs descended from the prototype "PEP" stock, the class was never proceeded with as the planned services for which it was to be built were cancelled. Background "Picc-Vic" proposal In 1971, the South-East Lancashire and North-East Cheshire (SELNEC) Passenger Transport Executive, the body responsible for public transport in and around the Greater Manchester area, proposed the construction of a new underground railway tunnel intended to link Manchester's two remaining major railway termini, Piccadilly and Victoria, to create a new urban metro network. This tunnel, nicknamed the "Picc-Vic", was intended to link the disparate rail networks to the north (from Victoria) and south (from Piccadilly) of the city for the first time, allowing services through the Manchester city centre. At the time, the plann ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Picc-Vic Tunnel
Picc-Vic was a proposed, and later cancelled, underground railway designed in the early 1970s with the purpose of connecting two major mainline railway termini in Manchester city centre, England. The name Picc-Vic was a contraction of the two station names, Manchester Piccadilly and Manchester Victoria. The proposal envisaged the construction of an underground rail tunnel across Manchester city centre. The scheme was abandoned in 1977 during its proposal stages due to excessive costs, and that the scheme still retained two large and expensive-to-maintain terminal stations in Manchester; other similar sized cities had reduced their terminals to one. In 1992, the Metrolink system opened and linked both stations via tram, negating the requirement for a direct rail connection to an extent. In 2017, the Ordsall Chord became operational; an overground railway scheme directly linking Manchester Piccadilly and Manchester Victoria in a comparable fashion to Picc-Vic. History Background ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Rail Class 508
The British Rail Class 508 (or 4PER) electric multiple unit (EMU) passenger trains were built by British Rail Engineering Limited, at Holgate Road carriage works, York, in 1979–80. They were the fourth variant of BR's standard 1972 design for suburban EMUs, eventually encompassing 755 vehicles and five classes ( 313/ 314/315/507/508). They have worked mostly on the Merseyrail network since 1983 and continue to do so, having been refurbished by Alstom's Eastleigh Works. The Class 508 unit is now years old. Description The class was developed for Merseyside, following extensive trials and testing of the 4Pep/2Pep stock that was built in the early 1970s. Testing of Class 313 took place on the Northern Line on Merseyside, using 313013/063 which were loaned from the Great Northern Line of the Eastern Region to Hall Road TMD. Original plans were drawn up for 58 Class 508s to be constructed, although costing issues limited the eventual number to 43. However, following planning ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Rail Class 507
The British Rail Class 507 is a type of electric multiple unit (EMU) passenger train built by British Rail Engineering Limited at Holgate Road carriage works in two batches from 1978 to 1980. They were the second variety of British Rail's standard 1972 design for suburban EMUs derived from British Rail Class 445, PEP stock, which eventually encompassed 755 vehicles over five classes (British Rail Class 313, 313, British Rail Class 314, 314, British Rail Class 315, 315, 507 and British Rail Class 508, 508). They have worked on the Merseyrail network from new and continue to do so, having been refurbished by Alstom's Eastleigh Works. The Class 507 units are all now or more years old. History With the British Rail Class 502, Class 502 units life-expired, unable to cope with the demands of the new ''Link'' tunnel and approaching 40 years old, by 1977 a replacement was sought. Owing to the success of the British Rail Class 313, Class 313 fleet on suburban services from London King's ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Rail Class 315
The British Rail Class 315 is a fleet of alternating current (AC) electric multiple unit (EMU) trains, built by British Rail Engineering Limited at Holgate Road Carriage Works in York between 1980 and 1981; they replaced the Class 306 units. It was the fifth and final variant of unit derived from British Rail's 1971 prototype suburban EMU design which, as the BREL 1972 family, eventually encompassed 755 vehicles across Classes , , 315, and . Revenue services with Class 315 units commenced in 1980 and continued until December 2022. Description Each Class 315 unit is formed of four vehicles; ---DMSO. Up to three units can be used together in service for a maximum 12-car formation. Each DMSO vehicle carries four DC traction motors, each of for a total power output of per unit. The order included an element of dual-sourcing 41 units (315801–315841) were fitted with electrical equipment from Brush Traction, while equipment for the remaining 20 units (315842–315861) was p ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Rail Class 314
The British Rail Class 314 was a class of alternating current electric multiple unit (EMU) trains built by British Rail Engineering Limited's Holgate Road carriage works in 1979. They were the third class of units derived from British Rail's 1971 prototype suburban EMU design which, as the BREL 1972 family, eventually encompassed 755 vehicles over five production classes ( 313, 314, 315, 507 and 508). The Class 314 fleet was used to operate inner-suburban services on the Strathclyde Partnership for Transport rail network in and around Glasgow, most typically on the Argyle, North Clyde, Cathcart Circle, Paisley Canal and Inverclyde lines. The units, formed of three cars each, worked either independently or in six-car pairs. Although the fleet had undergone a number of life-extension overhauls and upgrades, it was withdrawn from service in 2018–2019 as a result of non-compliance with the requirements of the Persons with Reduced Mobility Technical Specification for Inter ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Rail Class 313
The British Rail Class 313 is a dual-voltage electric multiple unit (EMU) train built by British Rail Engineering Limited's Holgate Road carriage works between February 1976 and April 1977. They were the first production units that were derived from British Rail's 1971 prototype suburban EMU design which, as the BREL 1972 family, eventually encompassed 755 vehicles over five production classes (313, 314, 315, 507 and 508). They were the first second-generation EMUs to be constructed for British Rail and the first British Rail units with both a pantograph for overhead lines and contact shoe equipment for supply. They were, additionally, the first units in Britain to employ multi-function automatic Tightlock couplers, which include electrical and pneumatic connections allowing the coupling and uncoupling of units to be performed unassisted by the driver whilst in the cab. The Class 313 units are the oldest EMUs on the National Rail network, at 46 years old; they entered ser ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Derby
Derby ( ) is a city and unitary authority area in Derbyshire, England. It lies on the banks of the River Derwent in the south of Derbyshire, which is in the East Midlands Region. It was traditionally the county town of Derbyshire. Derby gained city status in 1977, the population size has increased by 5.1%, from around 248,800 in 2011 to 261,400 in 2021. Derby was settled by Romans, who established the town of Derventio, later captured by the Anglo-Saxons, and later still by the Vikings, who made their town of one of the Five Boroughs of the Danelaw. Initially a market town, Derby grew rapidly in the industrial era. Home to Lombe's Mill, an early British factory, Derby has a claim to be one of the birthplaces of the Industrial Revolution. It contains the southern part of the Derwent Valley Mills World Heritage Site. With the arrival of the railways in the 19th century, Derby became a centre of the British rail industry. Derby is a centre for advanced transport manufactur ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Railway Technical Centre
The Railway Technical Centre (RTC) in London Road, Derby, England, was the technical headquarters of the British Railways Board, and was built in the early 1960s. British Rail described it as the largest railway research complex in the world. The RTC centralised most of the technical services provided by the regional Chief Mechanical & Electrical Engineers (CM&EE) to form the Department of Mechanical & Electrical Engineering (DM&EE). In addition, it housed the newly formed British Rail Research Division which reported directly to the Board. The latter is well known for its work on the experimental Advanced Passenger Train (APT-E). At that early stage this was a concept vehicle, and in time the DM&EE applied the new knowledge to existing practice in the design of the High Speed Train (HST), the later prototype APT-P and other high-speed vehicles. History Opening The Research Division was the first to move into the purpose-built accommodation on London Road. This was formed initi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cannon Street Station
Cannon Street station, also known as London Cannon Street, is a central London railway terminus and connected London Underground station in Travelcard zone 1 located on Cannon Street in the City of London and managed by Network Rail. It is one of two London termini of the South Eastern Main Line, the other being , while the Underground station is on the Circle and District lines, between Monument and Mansion House. The station runs services by Southeastern, mostly catering for commuters in southeast London and Kent, with occasional services further into the latter. The station was built on a site of the medieval steelyard, the trading base in England of the Hanseatic League. It was built by the South Eastern Railway in order to have a railway terminal in the City and compete with the rival London, Chatham and Dover Railway. This required a new bridge across the River Thames, which was constructed between 1863 and 1866. The station was initially a stop for continental servic ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> British Rail Class 445")
.jpg "Click for more on -> British Rail Class 316 (Picc-Vic)")
.jpg "Click for more on -> British Rail Class 508")
.jpg "Click for more on -> Railway Technical Centre")
