Speed limiter

Governor used to limit the top speed of a vehicle A speed limiter is a governor used to limit the top speed of a vehicle. For some classes of vehicles and in some jurisdictions they are a statutory requirement, for some other vehicles the manufacturer provides a non-statutory system which may be fixed or programmable by the driver. Statutory (UK) Mopeds The legal definition of a moped in the United Kingdom was revised in 1977 to include a maximum design speed of 30 mph (48 km/h). This was further revised to 50 km/h (31 mph) in the 1990s, then 45 km/h (28 mph) in the late 2000s to fall in line with unified European Union licensing regulations.[better source needed] To comply with this, mopeds typically include some method of onboard speed restriction to prevent the machine exceeding the prescribed speed (on a flat road, in still air, with a rider of standard height and weight). Older models such as the Honda C50 used a simple centrifugal governor as part of the transmission, which progressively and severely advanced the ignition as speed rose past a set point, causing engine power to fall off rapidly at higher rpm and road speed, but maintaining the low- and moderate-speed hill clim