Sea surface height

Measurement

The sea surface height (SSH) is calculated through altimetry satellites using as a reference surface the ellipsoid, which determine the distance from the satellite to a target surface by measuring the satellite-to-surface round-trip time of a radar pulse. The satellites then measure the distance between their orbit altitude and the surface of the water. Due to the differing depths of the ocean, an approximation is made. This enables data to be taken precisely due to the uniform surface level. The satellite's altitude then has to be calculated with respect to the reference ellipsoid. It is calculated using the orbital parameters of the satellite and various positioning instruments. However, the ellipsoid is not an equipotential surface of the Earth's gravity field, so the measurements must be referenced to a surface that represents the water flow, in this case the geoid. The transformations between geometric heights (ellipsoid) and orthometric heights (geoid) are performed from a geoidal model. The sea surface height is then the difference between the satellite's altitude relative to the reference ellipsoid and the altimeter range. The satellite sends microwave pulses to the ocean surface. The travel time of the pulses ascending to the oceans surface and back provides data of the sea surface height. In the image below you can see the measurement system using by the satellite Jason-1.